Equium M50-165: connection WLan keeps droping

Similar Questions

• Equium M50 cannot connect to Wifi b

  Hi, my M50 cannot connect to my wireless b router, it can connect to my network of friends g. The router has been tested with other laptop & works very well. Also can't update driver Wifi support page.
  Andy

  Hello

  Have you seen no yellow exclamations points in Device Manager in the section of wireless LAN card?
  Have you activated the card wireless switch on the side of the laptop and with the FN + F8 key combination?
  Please check these options.

  Good bye

• Satellite A300-02: connection WLan keeps falling & wireless network card is disabled

  Hello..

  You just bought a new A300-02W (canada), everything works fine wxcept... wireless.
  The passing continues WiFi connection and card wifi has been disabled, I restart the computer then go through the steps of repair under Win Vista to be able to connect again.
  I went to the store and got one same one, another model and I'm having the same problem, the drivers are up-to-date, tried to Win XP and it is the same question.
  Called Toshiba tech support and they advised me to wait for the new wireless driver because the laptop I had is still new.

  Wireless card: Intel wireless wifi link 5100agn
  any idea?

  Hello

  Your laptop is a Canadian series and that's why I put t know why this WLan issue appears on your laptop, but I recommend you use and installation and driver WLan Intel page.

  In addition, you can check the portal of Toshiba Europe WLan WLan driver:
  http://APS2.toshiba-tro.de/WLAN/

  In addition you must disable the option in the properties of card WLan (Device Manager-> properties-> Advanced tab CAD WLan) for energy savings
  Also check the power management tab and turn off also the option called allow the computer to turn off the device to save energy

  Finally, and especially if a newer BIOS has been released for this series then update!

  Good bye

• Satellite L300 PSLB8E - connection WLan keeps falling

  Hi all

  Have gotten my Satellite L300 PSLB8E some 2 months ago and since the first day (RTL8187b) wireless is having serious problems.

  Continuous wireless connection drop if other phones that I use at home are very good.
  LAN on the same Satellite works fine as well, it's just wireless problem with this particular machine.

  I have tried to restore the system, using recovery discs, tried every possible update Toshiba as Realtek, but problem remains intact.

  Help, please!

  Mustafa

  Hello

  What version of BIOS you have on your laptop?

  There is a version v1.8 of BIOS on the European driver Toshiba page.
  Check if you have a lower version. If so update!

  In addition, I would recommend WLan driver download Realtek page:
  http://www.Realtek.com.tw/

  You can find the most recent driver.

  Last but not least that it would be a good idea to verify that the settings in the Panel-> WLan card properties-> Advanced tab.
  Here you can change the encryption, the channel and the power saving settings.
  I recommend turning off the energy-saving WLan card.

  You should also update the Vista of the State. I read that Vista has caused a lot of issues that have been fixed with the latest patches and fixes.

• Satellite C660 - connection WLAN keeps falling

  I have a Satellite C660 and when I try to go on internet connection continues to fall, I tried my son and the same things happening there, so I don't think this can be a problem with the router. I tried to download the lan drivers, but this did not help.

  Please help it's crazy of me and my son!

  Hello

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59879

  The problem can be solved by changing the WLAN economy option in Windows 7 management of power supply supported.

• Satellite SL20-205: connections WLan keeps falling works

  It has been a problem on my Satellite SL20-205 I bought it, but now it has arrived more irritating. (Intel BG2200) wireless network adapter card drivers are up to date and XP SP2 is installed (but absent on some critical updates to the OS).

  The problem is, since about 2 months ago that I bought this laptop, wireless connections cut market. The Signal is Excellent and the status displays connected during all this time, it's just that I am unable to ping my router Speedstream or access routers GUI and internet. Just as suddenly, I lose my connection to the Wless router, then all of a sudden I recover too.

  I have tried to change the properties of the map Intel Bg2200 and focused on the same channel that set up on my speedstream gateway. My Wireless Gateway settings are as under:
  -------------------------------
  Status: enabled
  SSID: LAB
  Channel: 11
  Security mode: WPA - PSK
  Info security keys: TKIP - lab - 30
  SSID Broadcast: enabled
  Filter Mode: enabled - allow
  Data - RTS/CTS-FRAG: AUTO - 2346-2346
  --------------------------------------------

  I've noticed that when my laptop stops transmitting, LED on the router Speedstream wireless also turns off and all of a sudden when the connection is re-established, the LED also goes.
  All of this, my out the door speedstream Office UTP connection works fine and I can browse the internet.

  I was wondering if it comes to WLAN card and while I'm covered under warrantly, I should get it replaced but I just want to be sure.

  Any Advisor!

  Hello fahim

  If you search the forum wireless, you can see many similar comments. I put t know which driver WLAN is preinstalled, but please check the Intel download page, and also new Toshiba WLAN page under http://aps.toshiba-tro.de/wlan/

  Please be sure to have the latest version of the driver that there are listed. Many users have also reported this problem on some access points, and not on all of them. If a friend you have WIFI at home please try to verify the WLAN connectivity with some other router (other manufacturer).

• Equium M50 connect to the WLan router only when security is disabled

  MY Equium M50 will connect to my ROUTER BELKIN g only MIMO when security is disabled.

  What is the reason for this please?

  Blonde bimbo!

  Hello

  Did you mean WiFi encryption that blocks the entrance to the local wireless network?
  I suppose that you have set the encryption (WPA, WEP, etc...) on your router WLan but didn't configure the wireless network adapter.

  Well, in my opinion, you should check out what WLan encryption makes the card holder and then choose it on the WLan router. The encryption key must be set to the router and the laptop!

• Equium M50: 2200BG WLan - unable to connect to the internet

  Equium M50 / wireless 2200BG Pro / Wireless eircomNETOPIA router 1642 4640 eircom

  Hello

  I have Aproblem with my wireless connection

  When I go to network connection I have 3 parts:

  1-broadband: inside there is a connection to broadband in disconnected state

  2 - LAN or high speed internet: inside there are 3 parts:
  in connected state (wireless 2200 BG) wireless network connection
  connection to the local network in connected state (marvell yukon)
  connection 1394 (1394 network adapter) connected status

  3 - Assistant

  So, normally the wireless connection works. But when I unplug the ethernet cable the part with the LAN connection is not connected and I can't connect to the internet, even though the wireless is connected.

  Can someone help me?
  Thank you in advance

  Generally, it should be possible to set up the broadband connection data in the configuration of the router.
  This must be done to connect to internet.

  So if you have disconnected the LAN cable please check if the WLan switch lights and check the FN F8 key combination.
  Then check if you can see the SSID in the Wlan network connections.

• Equium M50: How do I change the details of Wlan WEP?

  Does anyone know how to change the WEP (?) details on an Equium M50, I just signed up to broadband wireless Orange and they tell me that their WEP key is 26 digits and look only some old pc for 23 codes numbers? I can't put my wireless switch on and my laptop is wireless box but will pair not to her.

  Any help would be greatly appreciated I have a centrino laptop, a wireless box, a monthly bill of £18 and I still have to use a thread!

  See you soon,.
  Nick.

  Hello

  Available in two flavors, 64-bit and 128-bit static WEP. When you configure a channel key on access point or client device a hex (or ASCII) WEP came to represent the key.
  If you use WEP 128 bit, the user has entered the portion is 26 digits HEX (ASCII 13 characters)
  Encryption WEP 64-bit required 5 password alphanumeric characters numbers and 10-digit hexadecimal characters.

  I put t know what WLan application you use but generally if you have Atheros WLan card you should be able to change the encryption in the Atheros WLan utility.

  If you use Windows to configure the WiFi connection so in this case you must change under properties of the Wlan network.

• Equium M50 - E-mail Message to update the WLAN driver

  Hello, I got this message. When I tried to check what is the right driver, I was told, there isn't one!
  Could someone please advise others that I wouldn't confuse my machine

  Thank you

  -Original Message-
  From:
  VOX
  Sent: Tuesday, March 18, 2008 09:41
  Topic: Site Web de Toshiba alert

  >
  >
  >
  >
  > Hello,
  >
  > Here is the latest software updates for your machine:
  >
  >
  > PC: Equium M50 (PSM59)
  > Type: Wireless Lan driver
  > Language: universal
  > Operating system: Windows XP
  >
  > Click on this link to read the full article.
  > http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?ID=58122&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8
  >
  > Click this link to find compatible drivers
  > http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  >
  > If you wish to unsubscribe from these alerts by e-mail, please click the link below to edit your profile on the Toshiba site.
  > http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/login.do
  >
  >
  >
  >
  >
  >

  There are not a lot of advice. WLAN new driver is available and if you want, you can update. If you are satisfied, how the WIFI network for the moment no one you don't have to do anything. Leave it as it is.

  WLAN drivers, you can find under http://aps.toshiba-tro.de/wlan/ and download whenever you want.

• Equium M50-244: Question about upgrade memory and Wlan card

  I have a model Equium M50-244. What type of network adapter I need to fit a Wi - Fi connection on my hub (BT)?
  Also, I currently have 512 MB of ram installed. Can I increase this?

  Hi cora,

  Of course, you can improve the memory to a higher value.
  This book must support 2 slots of memory and it should be possible to increase memory for max 2048 MB. In this case, you can use 2 x 1024Mo module.

  I also found information that this laptop will accept this module:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  I put t know if you've experienced the site options & Accessories Toshiba, but if not then visit this:
  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/JSP/OPTIONSANDACCESSORIESHOME.DO?SERVICE=EU&ID=ONLINE _ SHOP

  You will find more compatible parts.

• Equium M50: Can what cable I use to connect to the TV?

  I want to connect my computer to my TV. I went to my local computer store, but they showed me about 5 different cables and I had no idea which one would be better or work at all. Can anyone advise me on what cable would work for my computer the Equium M50-192? Or I can even buy such a cable online?

  Thanks in advance.

  Hello

  I think that you need a cable 4pol usual s-video mini-DIN.
  This should be consistent and should work fine.

• Equium M50 - how to connect firewire devices?

  Equium M50 Intel Celeron M 360 1.4 GHz processor

  Referring to the above, I am able to download photos from my camera to my hard drive, but to download videos that I need to connect a firewire camcorder to the computer. There is no connector on the computer to take in this regard.

  Is there a solution to this?

  Hello

  I put t know if your camera has a firewire port, but if yes it is listed in the Device Manager as IEEE 1394 bus host controller.

  If your device doesn't have a firewire port, you can buy the PCMCIA card with firewire port. By the way: M50 has 4 USB ports (two in the back near LAN port and two near the DVD drive on the right). On models with firewire ports it is definitively placed near S-video output port as Michael described.

  Good bye

• Equium M50-164 - Touchpad problem if an AC/DC adapter is connected

  Hello

  Can anyone help? My Toshiba Equium M50-164 has intermittent problems with the touchpad. Sometimes its fine, sometimes the cursor will jump around the screen, out of control, then comes oneself, the problem goes away when I remove the power cable and returns when it is reconnected.

  Other times it is fine with the power cable plugged, it suggests maybe the power supply causing a problem for me, but I was hoping that someone with more experience could give me some advice.

  Thanks in advance.
  lbansal

  Hello

  You are using an original from Toshiba AC adapter or to a 3rd party manufacturing?

  It's not easy to say what the reason is, it could be a problem of AC adapter or motherboard.
  I think the best way is to contact you nearest authorized service provider. Go to them with the laptop and the AC adapter and ask a technician for help. They can check the laptop and the material.

  Good luck! :)

• Equium M50-164 wireless issue

  Hello

  I have an Equium M50 - 164 and a router and a Netgear wireless modem. When you use the wireless internet and navigation to various web pages, my browser tells me often that the "server not found". My wireless signal is "Excellent" and it does not physically lose the connection, as it is still showing as connected in the system tray. I also had the latest firmware for my modem/router and the last driver for the Intel PRO Wireless card. Someone at - it ideas on what could be the problem?

  Thank you.

  Hello

  I put t know what Intel WLAN card you have, but I presume that is 2200 B/G. If so try please install the latest version of the driver in the list on the Intel site.

  You can find it under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Very interesting content, you will find under http://support.intel.com/support/wireless/wlan/pro2200bg/

  Good luck!