Equium P200 problem with WLAN networks

Similar Questions

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Error code 797: connection is not available because there is a problem with your network card or modem

  I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

  Hi Muffakham,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check out the link for more information.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• Satellite C850 - found problems with the networking and the FN key

  Hey everybody,

  I work on a Satellite Toshiba C850, that my parents recently bought and spin in a certain number of questions.

  (1) wireless won't connect to my network. Have done the following: verified by connecting on two other computers, reset the router, the open network, reset the map, reinstalled the realtek drivers, checked the settings in the networking of Toshiba Utilities. End result is he's going to try, and fail. Wired LAN works fine.

  (2) FN key does not work. Have you checked the region and it is OK, have tried to use the Flash cards - no change, checked with the screen keyboard and can check the FN key does not register.

  I noticed that the first problem is common, but there are obvious positive results. If anyone can offer any assistance, I would appreciate it a lot.

  Before you begin to discuss your problems can you please tell us what OS you are using?
  Are you using the original OS that you got with your laptop? I mean original recovery image has been tested and works correctly, with the factory settings that all should especially the FN keys.

  1 / What do you mean with refusing? your WLAN is visible for your laptop?

  2 / if there is problem with the feature keys FN and you use Win7 try please reinstall extra package from Toshiba.

• Problem with wireless network, Windows 8/8.1, Toshiba Sattelite L50-A-1EH

  Hello MS.

  I have problems with my wireless network card. At this point, I think it's maybe a defective hardware. Here's the problem:

  I have an access point SSID which connects, but disconnect every 10-15 minutes. It is offline for a minute until it reconnects automatically or if it is disconnected and I have to reconnect manually it reconnects quickly.

  The laptop is a Toshiba Sattelite L50-A-1EH. Network card: Atheros AR956x.

  To resolve this problem, I tried the following:

  • Install several drivers, Atheros themselves as well as the drivers of Toshiba for this specific model cell phone section.
  • Install these drivers on Windows 8.1, downgraded to Windows 8 (maybe better driver support was my guess, still no luck)
  • Tried driver versions: 0.0.75/0.0.263/0.0.270/0.0.287 (latest)
  • Changed automatic IPv4 DHCP to static IP
  • Modified profile profile manually created for this SSID wireless

  In the event viewer Windows 8 under autoconfiguration service WLAN it says: autoconfiguration WLAN service cannot connect to a wireless network.

  Reason for the failure: the pilot disconnected all combining.

  The router is not the problem, I have several other devices connected to this point of access without any problems, or whatever.

  At this point, I think it is a hardware on the Atheros AR956x card problem because I can not imagine that Toshiba would have a product on the market that is pre-installed with Windows 8.1 which does not work drivers.

  Any thoughts? Very much appreciated.

  Hello badr V.

  Let me let you know that I finally managed to fix the problem.

  I tried a lot of things, but what ended up working was the following:

  Updated the BIOS with the latest version (1.6-> 1.7), decommissioning of 8.1 Windows of Windows 8 and installation of driver in charge of Windows 8. For me, it was 10.0.0.247 who continued to work throughout.

  Thanks for the guide if.

  Yours sincerely,

  Rick Lamers

• Problem with the network connection security

  When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.

  How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?

  Can you give an example of the websites that you see this 'error' on?

• Problems with the network controller

  Hi, I have a problem with the driver for network controller. I mean my wireless does not work... it connects to the router, but it still has this yellow warning and will not connect to internet. I tried everything and it doesn't work. I have not found a pilot wireless on the hp site. I have a HP laptop model 15-r020sq.

  Hi, I used the driver that you post. Now I have the same problems as before. I went over the details of the driver it's what he know upstairs: PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

• Satellite C600/C660D - problems with WLAN connectivity

  Hi guys

  I recently bought a Toshiba Satellite C660/C660D laptop to replace my old. I set up a wireless connection at home too. According to my laptop and wireless connection that I am connected but when I go to use internet and try to search for something it won't let me. I ran the troubleshooting and Diagnostics over and over again and the message I get is "your computer seems to be correctly configured but the device or resource is unresponsive."

  It is not a problem with the internet connection that I tried to plug in on my old Toshiba laptop and it works perfectly well and my sister tried it also on his Sony laptop and no connection problems.

  Is there a setting that needs to be adjusted?
  I would be very grateful for any assistance with this and as I don't know what else to do. its starting to get a bit frustrating now

  Thank you

  It's very strange.
  Have you noticed the same thing using different browsers?
  You can use any other application like Skype or MSN?

  What you can try is to update WLAN driver.

  Please visit Toshiba s WLAN portal and install the latest driver for your WLAN card - http://aps2.toshiba-tro.de/wlan/

• Problems with WLAN on Satellite L350

  Hello
  I try to write it in English :-)
  I have the Toshiba Satellite L350 computer laptop for 1 week.

  At home I can't connect with my WLAN network, need to give my networkkey, but it Doesna´t work. Whenever displays the errormessage "bad Networkkey.
  But the key is correct. I have try the WLAN on another point, and it works.
  On the Toshiba site, there are 3 drivers. But I cannot use the realtek driver. When I install the other driver 2, the computer laptop Doesna´t find the Wlan Hardware.
  I hope someone can help me?

  Thank you!!!

  > On the Toshiba site, there are 3 pilots. But I cannot use the Realtek driver. When I install the other driver 2, the computer laptop doesn t find the WLan hardware.
  Laptops can be equipped with various wireless network cards, and that's why you can find three different WLan drivers on the Toshiba page.

  > Encryption on my router is WEP. On the laptop, I do find where I can change it.

  1. click on the Start button
  2. click on network in the column on the right in the start menu
  3. click on Network Center
  4. click on reorder wireless networks
  5 double-click on the wireless network you want to change
  6 click ' Security tab
  7 change the network security key and the encryption type
  8. click on OK

  Easy ;)

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• Pavilion g4-1357TX: problem with other network devices, VGA,.

  Hello

  I just installed 64 bit - Windows 7 on my g4-1357TX Pavilion.

  Since I use 64 bit OS, I have a problem with my devices. I read a few topics related to this issue.

  You can find me under drivers for devices of mys:

  1 standard VGA graphics card

  PCI\VEN_1002 & DEV_6760 & SUBSYS_166C103C & REV_00

  PCI\VEN_1002 & DEV_6760 & SUBSYS_166C103C

  PCI\VEN_1002 & DEV_6760 & CC_030000

  PCI\VEN_1002 & DEV_6760 & CC_0300

  2 BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112

  USB\VID_0A5C & PID_21E3

  3. Ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_166E103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS_166E103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  4. network controller

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C

  PCI\VEN_14E4 & DEV_4727 & CC_028000

  PCI\VEN_14E4 & DEV_4727 & CC_0280

  5. PCI device

  PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C & REV_01

  PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C

  PCI\VEN_10EC & DEV_5209 & CC_FF0000

  PCI\VEN_10EC & DEV_5209 & CC_FF00

  6 PCI Simple Communication controller

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_166E103C & REV_04

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_166E103C

  PCI\VEN_8086 & DEV_1C3A & CC_078000

  PCI\VEN_8086 & DEV_1C3A & CC_0780

  7. SM Bus controller

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_166E103C & REV_05

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_166E103C

  PCI\VEN_8086 & DEV_1C22 & CC_0C0500

  PCI\VEN_8086 & DEV_1C22 & CC_0C05

  Really appreciate your assisstance.

  Kind regards

  Reza

  Hello:

  First install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94402-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5263572&sw_lang=&product=5263571

  Standard VGA Graphics adapt:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99756-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5263572&sw_lang=&product=5263571

  BCM20702A0:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101140-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5263572&sw_lang=&product=5263571

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100017-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5263572&sw_lang=&product=5263571

  Network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95652-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5263572&sw_lang=&product=5263571

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100467-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5263572&sw_lang=&product=5263571

  PCI Simple Communication controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94325-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5263572&sw_lang=&product=5263571

• Problems with NAS network drive

  I have problems with network drives mapped to a Maxtor Central Axis device.

  I put in place of the personal folders with restricted access on the same level as the public drive by default. However, now that they will not connect and I get this message.

  "Year error occurred while reconnecting J: to."
  \\HOMESERVER01\Andrew
  Microsoft Windows network: Multiple connections to a server or shared
  resources by the same user, using more than one user name, are not
  allowed. Disconnect all previous connections to the server or shared
  resources and try again.

  This connection has not been restored. »

  What does that mean? Unfortunately it doesn't gives me an Error Message number. It happens that files with restricted access. Some of the restricted files will have 1/user computer tries to connect to this folder. Any help appreciated. Let me know if you need more information

  Hi AndySchliewe,

  You use a Windows Home Server?
  If so, I think you might want this post in the Windows Home Server community to see if there is no response

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  Good day

  Kevin
  Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player cannot play the file because of a problem with the network or firewall settings.

  Windows media player cannot play the file because a prblem with the network or firewall settings, you can help me solve this problem?

  original title: windows media player

  Hello

  1. you remember to make changes to the computer before this problem?

  2. do you get this error when you try to play a specific file or all files?

  Follow these methods.
  
  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: I suggest that you disable Antivirus software and firewall temporarily and check.
  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software Tour

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Note: Firewall and antivirus to protect your computer against viruses and other security threats.  In most cases, you should not disable it.  If you have to disable it temporarily, you should reactivate as soon as you are finished.  If you are connected to the Internet or a network while the firewall and anti-virus are disabled, your computer is vulnerable to attacks.

  
  Method 3: try to change the proxy settings.

  a. open Windows Media Player, press the Alt key to bring up the file menu.

  b. click on the Tools menu and select Options. Click the network tab.

  c. Select a Protocol (HTTP and RSTP), click Configure , and then select Autodetect proxy settings or use proxy settings of the Web browser (available for HTTP protocol only). Do this for each protocol.

• Problem with the network - ACS 4113 device configuration

  We have problems with two particular devices. I'm trying to delete and add devices, but when I do a search and go to their intellectual property, I get.

  Impossible to edit blahblah.ourdomain... Reason: The host no longer exists.

  How can I get rid of this so I can readd devices?

  Thank you

  Dwane

  How many characters is the host name. If more than 32, you will not be able to change it in the GUI. Use the CSUTIL to remove. Re-create it with less than 32 characters.