Equium P300-16 t - very dark screen

Similar Questions

• Satellite P10-304: very dark screen with negative colors

  I have a SP10-304.
  One day I swithched turn it on and the LCD display seems negative like a photographic negative.
  It is very dark, but the colors are there just upside? I connected to an external monitor to the rear exit and it worked well.

  The backlight of the screen seems to be bright enough so I guess that it may need a replacement LCD screen.

  If anyone can help...

  Concerning
  Paul

  Hello

  If you are a lucky man, you won't need to replace the LCD view screen but only the inverter FL. The screen is more expensive laptop parts and it would be very unfortunate if the LCD would malfunction.

  To me, it sounds like a fault of FL-inverter and this part is not very expensive.
  I guess to contact the technician to change this part if you have no experience.

• Very dark screen of the Satellite L300-1FJ

  Hello

  I have a problem with LCD display on my Satellite L300-1FJ.
  It is very dark. At startup, I hardly see what is on the screen.

  I tried to increase the brightness, but it doesn't seem to work.

  Hello

  You mean you cannot increase the screen brightness by pressing FN + F7?

  Well, I think that the FL inverter is faulty.

  If the FL inverter starts to malfunction so everything on the screen will appear like behind a thick fog.
  In most cases, the FL inverter needs to be replaced.

  So contact the ASP technician in your country and ask for help!

  Good bye

• HP G60T - 200 CTO very dark screen & black spot on screen

  
  

  Hello! Thanks much for this information. I turned on my computer ran BIOS and almost immediately the screen went dim.  Once I'm in the Bios me to do anything other that run it for a bit?  I saw a few options (I have to use a flashlight to see the screen.

  Thank you! Malinda

• Equium P300-19O - black screen and does not restart

  My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
  I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

  Please suggest anything that could help me get the laptop again.

  Hello

  Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
  Maybe you can also try a system restore to a previous state.

  If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

• Satellite Pro A200 - display very dark

  My first post on this forum-

  I have a satellite a200 pro with a very dark screen, it works fine with an external monitor.

  I replaced the drive and the full screen with elements well known with no joy

  am I missing something simple? any thoughts welcome

  > I have replaced the drive and the full screen with elements well known with no joy
  That s very strange and to be honest I can't say with certainty why these spare parts not help you solve this problem. Is the external monitor looks OK and the chip chart isn t the troublemaker. So the problem must be linked to the internal screen or FL inverter.

  I recommend you contact the service provider authorized Toshiba to get more details about these issues and get compatible parts.

• Why is my screen very dark?

  my screen is very dark and it is a new computer using Windows 10. The screen was very bright and it is now difficult to read. The system has had a lot of problems earlier. I turned off the computer for about an hour and a half and now it is gray.

  This looks like a problem with the function of Adaptive brightness of Windows 10.

  I suggest to go in:

  1. Parameters
  2. Power options
  3. Change Plan settings
  4. Change advanced power settings
  5. Scroll down to view
  6. Select "enable adaptive brightness.
  7. pass the two selections on 'OFF '.

  That being said, please keep in mind that there is a support forum for Mozilla Firefox, not Microsoft Windows, we help you gladly your questions of Firefox but issues relating to associated Microsoft products really apply to Microsoft Support or community Microsoft Forums.

  I hope this fixed your issue, if it has changed then please your "Resolved" issue, so that we know that it has helped.

  Sincerely,
  Kyle

• Equium P300-16 t BSOD and black screen after the removal of GPU

  I have a Toshiba Equium P300-16 t and I was getting 90 c - 95B on realtemp so I bought a thermal paste of isopropol alcohol and yesterday that I changed the thermal past on the CPU and the GPU.

  When I booted up after that there was a long beep that lasted a few seconds and my speakers a few cracking apart from that everything was normal, but then after a few minutes my screen is odd (for example, green artifacts) and then went black.

  After awhile, I started my laptop to the top and the same thing happened with the speakers and a beep but the screen was fine. I opened realtemp and became c 65 - 70 c, then restarted because of an Avast update.

  Now, when I turn on my laptop the screen becomes either black or I get a BSOD 0x0F4. I tried to boot from a USB Win7 and repair, but the rest screen went black, so it is not a HARD drive problem as some sites say (from the BSOD error).

  BSOD is mainly a product of serious software problems or it seems due to a malfunction of the equipment.
  I guess this is NOT question related software since you don't touch software (am I right?). So I think you damaged somewhere during the disassembly of the laptop or the removal of CPU and GPU.

  I have no other way for you to control the affected parties? How?
  I guess you need a help from a technician who would be able to analyze the material for potential problems.

• Satellite Pro M10: image on the screen is very dark

  I have a portable Satellite Pro M10, which has a black screen, i.e. the backlight does not work. There is an image on the screen, but it is very dark. When you connect an external monitor, I get a normal picture on this screen.

  Information from other messages here, I conclude that there is a problem with the backlight of the lcd screen or the inverter. I checked all connections, but it does not solve the problem. If I bring the laptop to a service center how much it will cost about for repair? The thing is 2-3 years, so if it is very expensive I could better get a new laptop.

  I'm sure I'll be able to change the inverter Board myself, but how am I going to be able to determine that the inverter is the problem? How to get a new inverter? Is anyone of you know the number of good product?

  My Pro M10 itself has PS630E-G205Z-OF product number.

  Hello

  I agree with Tobi. You sounds description as a faulty FL inverter.
  This part is placed behind the LCD screen under the lid.
  As mentioned this part isn t very expensive and you could order the partner of Toshiba service in your country. But be aware that if you have no experience of replacement if you ask technicians for assistance.

• Satellite Pro L20 with a screen very very dark!

  Help me!

  I have a L20 Pro Sam last week and it worked very well. Now when I turn on the screen is very very dark. About, I can do on the Windows logo when it loads, but I can't seem to make it bright again. When I plug in an external monitor it doesn't have this effect on the external monitor - some help please!

  Hello

  I agree with Tom, I would also say that there is something wrong with the Fl inverter or with the tube FL. well, is the only way to solve the problem is to replace the broken parts. In this case, you will need to contact Toshiba service in your country.

• Problem of backlight Satellite Pro L10 - the screen is very dark

  Hello

  I've got a L10 Pro of the Satellite with a backlight problem - the screen is very dark.
  How can I confirm if it is the backlight themselves who have failed or the backlight inverter Board?

  Also, can someone point me in the right direction for a copy of the workshop manual?

  Thank you very much!

  Hello

  As you have said that this problem could be linked to the failure of inverter FL and in most cases, the FL inverter needs to be replaced.
  It's a little bit complicated and it s not desirable to try to replace it to your own hand as this may damage the screen of laptop computers.
  This is why I would really recommend contacting a Toshiba ASP because of two important reasons:
  First reason is that you can order the ASP compatible FL inverter and the second reason is that an ASP could provide help how to replace this part.

  If you want to know where and how he placed s then you can visit this page:
  http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-replace-LCD-screen-1.htm

  Of course, this page shows only the wow of instruction to remove and replace the Satellite A105 FL inverter, but the procedure is not very different from the Sat L10.

  But like I said above; If you have no experience don t do anything, which could damage the laptop!

• Satellite P200 screen is eventually died - now very dark

  Hello

  My laptop screen (Satellite P200) is eventually died.
  He had been much flicker when opening the laptop but settle.

  The screen is very dark and you can see just the windows etc. I can't connect a second monitor and run from that.

  -Is the screen, backlight went?
  -I'm out of warranty, how long does it take for an extended warranty through? The site has offered me one for relief.

  Any information would be great.
  Thank you
  Simon.

  Hello

  First you will not get an extended warranty, if you haven't bought it.
  If you warranty is no longer valid, then you will have to pay for the repair.

  Now a few words about your question;
  I think that your FL inverter is dead. The problem described in job ads seems to be a fault of inverter FL. This small part controls the backlight of the screen and causes this problem.

  I recommend contacting the technician of laptop (certified partner) and I will ask the Fl inverter assessment and if necessary I would work out a replacement.

  Good bye

• Portege R700 internal to screen very dark but can use the external monitor

  Hi guys,.

  just had a question about my Toshiba Portege R700 as the screen went white and I couldn't see the screen or sometimes I could and it was very dark!

  However, the laptop could start up as normal and I could use it normally through an external display!

  Subsequently, I replaced the screen and it started working again (happy days)!
  However, a few weeks down the line the same problem again apparently did screen dies.

  I take off again and disconnect and reconnect the screen just to see if that would solve the problem and he did, back and working again. I even tried the old screen I swapped and that works too!
  So I paid £140 + for a new screen that I didn't need, my question is what is the problem?

  Could not find anything else on this topic so would appreciate any help thanks

  Ross

  Hello

  It is difficult to say what might be wrong here usually black screen can be related to a faulty FL inverter.
  But laptop computer s display supports a backlight Led FL inverter should not be a problem here
  Maybe some loose contacts caused this

• Screen goes very dark on Satellite 3000 - X 11

  This problem occurs while working and when starting computer, not always but now more often. Initial intact Toshiba screen, but then the screen goes very dark. See just the Windows icon but it's too dark to work on. Anyone know if it's fixable?

  Hi arne

  Check with external display as suggested in previous assignments.

• Satellite A200 - screen is very dark

  Hi all:
  I use the Satellite A200-1DY

  My screen is broken
  the screen can see... but very very very dark.

  When I start the toshiba splash screen appears, but this one (in 1 sec) disappears and the screen is dark.

  I tried with another screen and it works.

  What can I do?

  Thank you

  Hello

  It looks like FL inverter problem.
  The FL Inverter control the backlight of the screen and if this tiny part does not work, the display looks like Misty.
  It seems that the Toshiba technician would need to replace this part.