Equium recognizes no more CD/DVD drive.

Similar Questions

• One or more CD/DVD drives are not able to burn?

  One or more CD/DVD drives are not able to burn what can I do to fix? I have window xp gateway gt4010

  Hi skywalker918,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  4. you have any third-party DVD burning software installed on the computer?

  Refer to the article below and run the Fixit tool available, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Also check the condition of the disc on the computer using Device Manager and the post is back with the details.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

• Equium A100-147 - deleted CD/DVD drive

  I uninstalled the readers of DVD/CD ROM of my Equium A100-147 model PSAABE by mistake. How I can I restore it? I'm not very technical

  Hello

  It means that your CD/DVD drive is not more?
  Have you already checked the Device Manager if the drive is visible or not?

  Otherwise, you must follow the instructions in this Microsoft KB article:
  http://support.Microsoft.com/kb/314060

• Equium A210 - known good cd/dvd drive not recognized by BIOS

  I tried several dvd cd players in this device, but the BIOS has 'no' against the optical drive...

  readers are good units because they work with a USB caddy on another machine...

  I need the optical drive to work so that I can re - install, like the hard drive is now corrupted. The recovery appears to require the laptop to boot from the CD drive.

  If there are suggestions on how I can install on a formatted hard drive, without using a usb cd drive, it would be cool...

  > readers are good units because they work with a USB caddy on another machine

  The BIOS does not recognize the CD/DVD drive because of the wrong master/slave/c-salt settings. You must use a compatible CD/DVD player. This CD/DVD drive can be ordered from local ASP.

  > Are there any suggestions on how I can install on a formatted hard drive, without using a usb cd drive, it would be cool...

  Perhaps you may be able to install Windows on USB
  I don't know if the BIOS can support booting from USB, but it s worth a try m.
  Here a beautiful page how to do this:
  http://Komku.blogspot.com/2008/11/install-Windows-XP-using-USB-Flash-disk.html

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• Equium L40 17 M CD/DVD drive not responding

  Hello

  My computer laptop satellite is about 3 months. The cd/dvd drive is not recognized. (It worked perfectly a month or two there times I last used)

  The error code I get is: -.

  * "This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. » *

  Unfortunately Microsoft does not seem to have a solution.
  The search for an updated driver fails to find a newer version; and the uninstall does not solve the problem.
  I also tried a full scan with Norton Antivirus, but found no problem.

  Someone at - it bright ideas on how to solve this problem?

  Perhaps this might solve your problem:

  Open your registry editor (run as regedit)

  Go to and select this key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Verify if the Upperfilters and Lowerfilters value are present. If so, please right-click on the values and select 'Remove' to remove them.

  Now restart your computer.

• Equium U400-124: no CD/DVD drive in my computer - error 10

  Hi newbie so please bear with me. East - the best place for me to post?

  Have a problem with my Equium U400-124 cd player.
  It does not appear in my computer and get an error 10 than TOSCDSPD.exe is not found.

  Searched on the partitioned part of the corresponding data recovery disk,
  suggestions where it could be downloaded would be great.

  Hello

  As far as I know that the file is part of the silent acoustic drive CD/DVD Toshiba
  Usually, you should be able to download this from Toshiba UE driver page but I doubt that the new facility would solve it however try

• MY computer does not recognize my CD or DVD drive. Install regognices Assistant readers and installs drivers but does not install readers it self. This problem appeared after I had my computor worked for virous".

  No error messages, unidentified DVD, slide open but data sets are not enabled.

  Hello Ted1931,

  Thank you for your message.  Please, click HERE and run the Microsoft FixIt! tool.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Portege Z930-118 does not recognize the external USB CD/DVD drive

  My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

  The CD/DVD device does not even appear at all in Device Manager.

  The reader is a SE-S084 Samsun and works well on another laptop.

  I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

  Hello
  I m not very well how to help you.

  I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

  I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

  From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
  I think the reader needs more power provided by a single USB port.

• CD/DVD drive is not detected.

  For some reason my CD/DVD drive is more functional.  I can't even eject the disc that is in it and it does not recognize.  I have searched for corrections and so far all I've done was to remove the filter lower and upper filters in the registry.  I'll try to uninstall and reinstall this drive, but I can't even find on device manager

  Any help would be appreciated... Thank you!

  Here is the solution I mentioned earlier. Good luck and thank you Greg!

  I thought I had posted the solution.  The upper and lower filters need to be refreshed.  Here is a solution I found on the Adobe forums. http://kb2.Adobe.com/CPS/402/kb402306.html

  Refresh the CD and DVD drivers list in the Windows registry.

  Warning: The registry contains information on the system that are critical to your computer and applications. Before editing the registry, be sure to make a backup of it. Adobe does not provide support for problems that result from incorrectly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For more information on the Windows Registry Editor, see the Windows documentation or contact Microsoft Technical Support.

  To refresh the CD and DVD drivers list in the Windows registry:

  Important: After you refresh the list of drivers in the Windows registry, you may need to reinstall any other CD or DVD on your computer to write applications. If you restart Windows after this procedure and other burning CD or DVD applications do not recognize the CD or DVD drive, and then reinstall those applications.

  1. Uninstall your Adobe application.
  2. Open the Registry Editor:
     • On Windows 2000 and XP: click Start > run. Type regedit in the box text open, and then click OK.
     • On Windows Vista: Click Start. Type regedit in the search text box, and then press ENTER.
  3. In the left pane of the registry editor, navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class and select the {4D36E965-E325-11CE-BFC1-08002BE10318} key, which appears as a folder.
  4. Select file > export (Windows XP and Vista) or registry > export a file from the registry (Windows 2000).
  5. In the export registry file dialog box, select the branch selected under export range, name the file (for example, CDDVDkey.reg) and click Save to save the file to the desktop.
  6. In the Panel to the right of the registry editor, select the LowerFilters line, and then choose the editing command > delete. Click Yes in the dialog box confirm deleting key.
  7. Select the UpperFilters line, and then choose the editing command > delete. Click Yes in the dialog box confirm deleting key.
  8. Close the registry editor.
  9. Open the Device Manager:
     • On Windows 2000 and XP: click Start > Control Panel. Double-click the system icon, click the Hardware tab, and then click Device Manager.
     • On Windows Vista: Click Start > Control Panel, double-click System, and then click Device Manager in the task pane.
  10. Click on the symbol more then to CD-ROM/DVD-ROM drives.
  11. For each listed DVD-ROM or CD-ROM drive, select the icon then choose Action > uninstall.
  12. Restart Windows.
  13. Windows will automatically detect and reinstall your CD-ROM or DVD - ROM drives. You can check that the drives are installed in the device (see step 9) Manager. If the drives are not present, open Device Manager and choose Actions > Scan for hardware changes.
  14. Reinstall your Adobe application.
  15. Restart Windows.

  Important: If this solution doesn't solve the problem with the application you reinstalled, then you must restore the CD and DVD drivers list in the Windows registry.

  To restore the exported CD and DVD drivers list:

  1. Double-click the registry key that you exported.
  2. Close the registry editor.

  3. Restart Windows.

  • Proposed as answer byGreg good and Cool Sunday, May 16, 2010 11:38

• CD/dvd drive not in Device Manager!

  tried all the fix it solutions and the problem is still there, here are the results

  CD/DVD, reading and writing

  Publisher details

  Problems found
  CD/DVD drive is not detected CD/DVD drive is not detected The disk is missing or disconnected

  Not fixed

  

  Rescan devices

  Successful

  Problems found

  Details of detection

  6 CD/DVD drive is not detected Not fixed

  The disk is missing or disconnected

  Rescan devices Successful Look for changes in available devices

  Details of detection

  Collection information
  Computer name:	HALOINDUSTRIES
  Version of Windows:	6.0
  Architecture:	x 86
  Time:	05/09/2010 23:08:36

  Publisher details

  CD/DVD, reading and writing
  This diagnosis identifies and solves common problems that can prevent you from reading and writing of CD/DVD
  Package version:	2.0
  Publisher:	Microsoft Corporation

  .. .i reinstalled the operating system and the drive of dvd/cd rom works for the installation of the operating system, but once it has fully installed the cd/dvd rom drive isn't even appear in Device Manager and it wont even open after the OS is completely booted!

  I also tried the regedit solution, but I have no upper or lower filters...

  I use a hp dv6815nr! Help, please!

  Very respectfully,.

  GK07

  I thought I had posted the solution.  The upper and lower filters need to be refreshed.  Here is a solution I found on the Adobe forums. http://kb2.Adobe.com/CPS/402/kb402306.html

  Refresh the CD and DVD drivers list in the Windows registry.

  Warning: The registry contains information on the system that are critical to your computer and applications. Before editing the registry, be sure to make a backup of it. Adobe does not provide support for problems that result from incorrectly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For more information on the Windows Registry Editor, see the Windows documentation or contact Microsoft Technical Support.

  To refresh the CD and DVD drivers list in the Windows registry:

  Important: After you refresh the list of drivers in the Windows registry, you may need to reinstall any other CD or DVD on your computer to write applications. If you restart Windows after this procedure and other burning CD or DVD applications do not recognize the CD or DVD drive, and then reinstall those applications.

  1. Uninstall your Adobe application.
  2. Open the Registry Editor:
     • On Windows 2000 and XP: click Start > run. Type regedit in the box text open, and then click OK.
     • On Windows Vista: Click Start. Type regedit in the search text box, and then press ENTER.
  3. In the left pane of the registry editor, navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class and select the {4D36E965-E325-11CE-BFC1-08002BE10318} key, which appears as a folder.
  4. Select file > export (Windows XP and Vista) or registry > export a file from the registry (Windows 2000).
  5. In the export registry file dialog box, select the branch selected under export range, name the file (for example, CDDVDkey.reg) and click Save to save the file to the desktop.
  6. In the Panel to the right of the registry editor, select the LowerFilters line, and then choose the editing command > delete. Click Yes in the dialog box confirm deleting key.
  7. Select the UpperFilters line, and then choose the editing command > delete. Click Yes in the dialog box confirm deleting key.
  8. Close the registry editor.
  9. Open the Device Manager:
     • On Windows 2000 and XP: click Start > Control Panel. Double-click the system icon, click the Hardware tab, and then click Device Manager.
     • On Windows Vista: Click Start > Control Panel, double-click System, and then click Device Manager in the task pane.
  10. Click on the symbol more then to CD-ROM/DVD-ROM drives.
  11. For each listed DVD-ROM or CD-ROM drive, select the icon then choose Action > uninstall.
  12. Restart Windows.
  13. Windows will automatically detect and reinstall your CD-ROM or DVD - ROM drives. You can check that the drives are installed in the device (see step 9) Manager. If the drives are not present, open Device Manager and choose Actions > Scan for hardware changes.
  14. Reinstall your Adobe application.
  15. Restart Windows.

  Important: If this solution doesn't solve the problem with the application you reinstalled, then you must restore the CD and DVD drivers list in the Windows registry.

  To restore the exported CD and DVD drivers list:

  1. Double-click the registry key that you exported.
  2. Close the registry editor.

  3. Restart Windows.

  • Proposed as answer byGreg good and Cool Sunday, May 16, 2010 11:38

• Satellite Pro A10 - CD/DVD drive - updated?

  I have an A10 and a few remnants of the A15 which I cannibalise the parts.
  The A10 has DVD playback only, while the A15 motorway had features of reading / writing DVD.

  Desperately the A10 BIOS does not recognize the A15 CD/DVD drive.
  Anyone know if it is possible to obtain this recognition - could I swap chips BIOS with the A15 for example?

  This machine is my toy and I have it running with a Pentium 4 M 2.4 GHz and 1 GB of ram (frustrating it does not accept the sticks of 1 GB!).

  It's a gift so if I break, well I'll be sad - but not heart broken...

  Hello
  You can only use the BIOS that came out for the Satellite Pro A10 series and which is available on the Toshiba page.

  But why you n t use a CD/DVD drive that is compatible with the model Satellite Pro A10?
  The manual provides details on supported devices.
  I found the user manual [here: http://support1.toshiba-tro.de/tedd-files2/0/userman-en-20090121085356.zip]

  On page 4-7 you will find info on the STRANGE devices supported by Pro A10
  -TEAC CD-224th CD-ROM drive
  -DW-224th drive TEAC CD-RW/DVD-ROM
  -Toshiba DVD - ROM SD-C2612
  -Diving Toshiba CD-RW/DVD-ROM SD-R2412
  -DVD-R /-RW drive SD-R6012
  -Hitachi drive of DVD - ROM RDA-8082
  -Player Panasonic UJDA-740/750 CD/RW/DVD-ROM

  Hope that the list could be useful.

• Satellite 1800-911: error #1 - C2502 CD/DVD drive IDE

  PC: satellite 1800-911 BIOS V.2.1.

  I try to fix the problem with my DVD/CD COMBO drive (all of a sudden do not read any kind of CD).
  I tried to update the firmware from 1313 to... I don't remember. I get now, before XP pro SP2 start, the "IDE #1 ERROR" message and the operating system do not recognize any DVD/CD.

  BIOS recognize, ligth blinks and you can use the eject button. When XP is from that of the ligth is disabled and the eject button do not work.

  Now, if I try to go back to firmware 1313 (from boot floppy BACK) I get an error TYPE ROM INCORRECT.
  Can I fix this?

  > BIOS recognizes, the light will blink and you can use the eject button
  That means nothing!

  If the IDE 1 error message # appears it means that the BIOS does not recognize the device (CD/DVD drive) that is connected to the IDE 1 controller.

  I think that you used just a bad firmware and flashed settings preinstalled with the wrong firmware!
  Now the master\slave\c-salt settings have been changed and the BIOS cannot access to ODD.

  I don t know where did you get the firmware, but in my opinion this firmware is certainly false and not supported!

  I found this drive here on the Toshiba page but the firmware is missing
  http://www.storage.Toshiba.EU/index.php?id=8&PID=99&SID=3

• Satellite L855D can not find my CD/DVD drive

  Hello!

  I don't know what happened to my computer, but it finds no more CD/DVD drive.
  I guess I could have removed some necessary player, but not the goal anyway.

  Is it possible to get it back?
  I tried RmvFltrs which I found on some Toshiba Google search tech support site, but it did not help.
  He said it worked but my computer tells me that the installation could not be performed.

  I'm not in a desperate need of training for work, I wonder if it is possible to make it work somehow. So if someone could help me with this, I'd be more than happy.

  Sincerely,

  Joonas

  Hello

  What exactly do you mean by my computer, but it does not find the CD/DVD drive more. ?

  It is recognized in Device Manager?
  The CD/DVD driver is part of the system. It cannot be installed manually.

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!