Equium - Touchpad crashes

Similar Questions

• Equium A60 crashed during the update of the Bios

  Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.
  Thanks in advance

  I presume that the BIOS chip is damaged. In this case, you can do anything to make it work again. Just approved can help.

  The problem is that the repair can be quite expensive. Check it out. If selling Yes the laptop on eBay and... you know what I mean. :(

• Equium A60 crashing while playing Evolution Soccer 5

  Hey,.

  I just bought Pro Evolution Soccer 5 on playstation 2 and I've been playing online. However, when you do this my laptop broke down several times and it obviously loses the connection. It only happens with pro evo 5, it works very well with Tony Hawk underground. any ideas what the cause of the crash?

  laptop: Equium A60
  OS: Windows XP
  Proccesor: Pentium 4
  Internet: Blueyonder broadband (connected to the desktop computer, then my laptop with belkin wireless router).

  Any help much appreciated.

  Hello

  Can you tell me how you can play the games designed for a Playstation 2?
  I'm sure that it s is not a unity problem, because other games work well. I think you should check on the web for some patches for this game.
  I m that you can find an information about this.

  Good bye

• Equium M40x crashes whenever I use it

  I have an Equium M40x and it crashes whenever I use it. its about 13 months old and the problem has been there from the beginning butis is getting worse now. Anyone seen this before?

  Hello

  I want to be as short as possible: maybe it's time for the clean OS install. The fact is that, after very long and intensive OS using PC performance is not as before.

• My Equium M70 crashes when I run MSN

  Hi guys

  been looking everywhere for a solution to this, but I had no luck so far.

  I just invested in a new laptop (m70-339 h 735)

  Its brand new and I configure internet (wireless) perfectly well, started surfing the net as expected.

  I downloaded windows live messenger... and it connects to my address, but as soon as it connects
  It crashes.

  I tried an older version 7.5 and it does the same thing

  Windows Messenger (very very old pre installed) works fine but not what I want to run

  No help from boys or girls?

  Concerning
  Matt

  Hello Matt

  It is really hard to believe what's happening here. MSN usually works well on all models of laptops and without any problem.

  You have problem with ICQ or perhaps with Skype?
  Please check this FAQ MSN section

• folio13 Touchpad crashed

  System: Windows 7 home 64-bit

  Problem: After installing the drivers updated on HP site, the touchpad is not working.

  Action: remove the synaptics driver and reinstall the synaptics touchpad driver 55665.exe sp. While trying to installit, I received the message: "this program could not have installed correctly". I repeated the procedure without success.

  What could be a solution?

  Hi John,.

  Welcome to the HP Forum.

  If you are satisfied with the version of the driver that you downloaded, and then follow these steps to relax things in working order.

  Be aware: this method of reset does NOT erase or change your data.  The Hard Reset simply erases the memory for the drivers and software are read from charge in the operating system installed.

  Perform the Hard Reset .  Start the computer and connect

  ===========================================================================================

  The following driver is newer than the one that you just installed.

  • Download and do not install this driver:

  Synaptics TouchPad Driver V16.0.5.1 sp57302

  • Remove the driver you have installed using this program: Fixit
  • Restart the computer and log in.  A driver can install, let that happen.
  • Install the downloaded driver.
  • Restart the computer and log in.

• BSOD errors on portable satellite

  Equium Laptop crash with BSOD errors.

  Tried to install from the DVD of Vista, but I receive the random BSOD messages
  who will stop the installation. They are:-

  IRQL NOT LESS OR EQUAL
  0x0000AC88, 0x0000001B, 0 x 0, 00000001 00000005, 0x895080BF

  and

  0xc0000005, 0x8ACF2060, 0x87DD4B5C, 0 x 00000000, 0 x 00000000
  Win2K.sys

  Can you please choose the wire where you want to continue the discussion on the BSOD computer satellite phone?
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=159338

• Equium P300-16 t with Synaptics touchpad. Stuck left button?

  Hi all

  I have an Equium P300-16 t with a Synaptics touchpad.
  A few months back I had the following problem. As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point. I've updated the drivers, tried a system restore, checked under the button of touchpad for obstruction etc and nothing has changed.
  I made a completely new reinstall of Windows... still the same problem. Suspected a defective touchpad, so I contacted Topaz for a replacement touchpad mounted that and still the same problem.

  so... after having eliminated defective drivers/software/hardware, I'm out of ideas. Is there anything else I can check?

  Works very well with a USB mouse.

  Thank you

  James

  > As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point

  I think you should check the settings.
  In Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  Here, you should be able to get all the parameters of the touchpad.
  In my case, I found interesting feature in the speed of the pointer and typing parameters.

  There is a charming area of tape, and if you enable registration you could get access to other environments of tapping.
  The option is called DragLock in my case that his automatic release and auto release delay value is set on the court.
  Recommend you check this!

• Equium M40 portable: Touchpad problems

  First of all sorry if in wrong place but couldn't find a group for this laptop. problem as below.

  I just got a new toshiba laptop and when I used it all first my touchpad was
  the side usual low scrolling functions and hot spots, etc.
  Now, he works as a base of the mouse, the cursor moves and you can click
  etc. on the keyboard itself. But I've lost the ability toscroll using the side
  and at the bottom of the pad etc.
  I tried double click on the key and start the program, but nothing
  He's coming!
  I did the transfer of my old laptop settings by using the Windows XP file transfer
  Assistant, is otherwise responsible?

  so far I tried to re install the supplied the toshiba ALPS touchpad driver and
  Touch and the launch but no joy.

  Can anyone help?

  Andy

  Hello

  I don't know exactly where you can find a correct setting on this unit, but it must be somewhere in the mouse properties.

  Please also check the model of laptop. Equium M40 does not for me. Just A60. Give us please the right laptop model.

• Tempo service crashes on Equium A200

  Equium A200, Windows Vista.

  Tempo service crashes whenever I start the computer.
  I did a search of file Version.txt and minidump.mdmp but can't find them.
  Can anyone help?

  Details below.

  Description:
  Laptop Performance Tuning Service service hung on starting.

  Signature of the problem
  Problem event name: ServiceHang
  Service name: TempoMonitoringService
  "Name of the image: TempoSVC.exe.
  Image Version: 0.0.0.0
  Type of service: 10
  Startup type: 2
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 2057

  Files helping to describe the problem
  Version.txt
  minidump.mdmp

  Hmm I m really don't know why this service is suspended, but you can disable it.
  This could be the * msconfig.
  Then restart and check whether or not the service has started.

  Good bye

• Equium A100-027 touchpad not responding

  I have an equium a100-027 and today the touchpad was funny.
  For example, I went to move and sometimes it wouldn't be no move, moved very little, or when he moved quickly moved to around to the same place that it was before.

  I assumed that maybe it's just that my computer has been used too much memory or something. But then later, it no longer responds. I restarted my computer and the same problem, it does not move.

  Before anyone suggests, I in fact checked all the settings for it. I know there is a shortcut (fn + f9) to turn it off.
  However, I already checked and it is activated.
  I am falling quickly with this computer, six months old and already had two problems with it.

  Anyone can suggest a way to solve this problem, or should he be returned to be repaired?

  If it must be returned, how should I do this?
  I bought of Dixons, and when I came down to them with my last number, they said they have no responsibility and I had to call "the tech guy".

  This ended up being A £1.50 tech support number overcharge, which I'm not call again.
  This laptop has only 6 months, clearly under warranty. I don't have to pay who knows how much on a phone call just to get it fixed.

  Sorry if this sounds like a hangover, just in a bad mood with this computer at the minute.
  Thanks for any help! =-)

  Hello

  I see that you're desperate. Sorry to hear this story.
  But before you send this laptop to any point of service, you must reinstall the laptop with the Toshiba Recovery CD.

  This procedure will put the laptop to factory settings!

  If the touchpad does not work after reinstalling new contact ASP in your country.
  The service provider authorized in your country will be able to help you and if your warranty is valid, everything must be done for free.

  I can't believe that the appeal could cost about £1.5 because it s a common phone number.

  If you want to find the ASP please check this:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Equium A210-1AS: Touchpad problem - the mouse becomes unusable

  Hello

  I have problems with the touchpad of my laptop Equium A210-1AS.
  After some time of use of the mouse becomes unusable and just starts bouncing around the screen and becomes uncontrollable.

  The only solution then is to unplug the laptop and turn the power off, re start the touchpad works again.

  I use Windows Vista and downloaded the latest touchpad drivers.

  Any help would be appreciated.

  See you soon
  Widdy1961

  This problem very strange s.
  Could you please tell me if this problem occurs after you reinstall the OS from the Toshiba Recovery CD?
  I read on several forums of Vista that some Microsoft Vista updates may have a bad influence on the touchpad driver
  Therefore, it would be very interesting to know if this problem appears immediately after the use of the recovery CD.

  Greetings

• Must disable Touchpad tapping Equium A60-173

  OK, so my father, I bought a laptop a few years and now it has forwarded to me. I am wanting to turn off tapping it on the button, but I can't find an option to do so.
  I installed a new copy of Windows XP Pro, so there may be some missing drivers that come on the recovery CD.
  I tried to find all the drivers, but I can't find my notebook anywhere. I ran the Toshiba program that is supposed to detect what laptop you have, but it came with nothing when I ran it and I also searched in the drivers on the Toshiba site section, but my laptop does not even appear in the choice of laptops.

  It is a Toshiba Equium and on the back, he said Equium A60-173 and the model number is PSA67E-00700C8J.

  So, if someone can tell me please how to disable the tapping on the touch pad that would be great. I can't disable the touchpad entirely because of course I want to control the mouse pointer.

  I saw a post that said to press Fn and F9, but has nothing, probably because I don't have the correct drivers installed.

  Any help would be great.

  Hey Buddy,

  The touchpad tapping function can be disabled in the options of the touchpad driver. FN + F9 key combination to disable the touchpad together so it s another function.

  The tapping function can be disabled if the touchpad drivers are installed. If you install Windows on a normal disc from Microsoft no drivers are installed and everything you need to install yourself. If you are using the Toshiba recovery that all disk drivers and tools are installed automatically because it contains a picture of the factory settings. Recovery disk is more comfortable.

  All the drivers and tools you need now can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Equium > Equium A60 > PSA67E

  As you can see you only need to search the Archives to find the drivers ;)

• Equium M50: Defective Touchpad

  Hello, I have a laptop Equium M50. The touchpad works very well when I'm working on the battery, but as soon as I connect to the grid it becomes erratic and intermittent. Does anyone know what is the problem?

  Thank you, John.

  Hello

  Have you tried to reinstall the driver for the touchpad and the utility?
  But it could also be a hardware malfunction.
  One of my friends had a similar problem. One day, it was not possible to get the touchpad under control. The cursor has jumped and it was not possible to do anything.
  The Toshiba service partner has solved the problem.

• Of crashes/blue Equium A60 laptop screen when the LAN cable is in?

  Hi all
  I have a laptop Toshiba Equium A60 which now extends for less than a year.
  I am running WinXp Sp2

  Yesterday, my laptop started to plant flashing a blue screen (not the time to see what he says that the computer reboots too quickly).

  I found that only apparently failed when the network cable is connected for example if I start the laptop, it will be put in service as usual, but when it starts to communicate with the network/router (I see glancing at blue screens in the lower Task Bar to the right), it crashes. I tried another port on the router but no luck.

  Is my network card: Realtek RTL8139/810 x Family Fast Ethernet NIC

  It works well in Safe mode and doesn't crash.

  I updated the driver but and it's always the same.

  I then decided to restore my laptop to factory/day via the Toshiba Recovery DVD.

  When it worked fine all day restored (had internet access via the network) until I clicked on: set up a home network or small business in the control panel. He crashed again in the same way. Now it will crash repeatedly like above.

  This could be a problem with my cable?
  Help, please... Any ideas?

  Thank you for the charges,
  Shay

  Hello

  If the network connection works fine, it is not necessary to set it up again. I guess there are conflicts and the unit freezes. In my opinion there is no problem with the hardware or with your cable with the network settings.