Must disable Touchpad tapping Equium A60-173

Similar Questions

• Equium A60-173 - after update BIOS not boot

  Hi, I have a Toshiba Equium A60 - 173 running Windows XP.

  I just tried to update the BIOS and everything was fine until it stops and does not turn on. I waited and waited and then it turned on myself. The result is a black screen or maybe even screen does not turn on. I left it for about 5 minutes then thought that he had crashed then tried to put out of service to restart. The power button does not respond so I left a little longer, then removed the battery)

  Now, the laptop does not start, I press the power button and get: beeeep beeeep beep beep then it shuts off: S
  I'm lost and I hope that I didn't destroy my girlfriends laptop!

  Any help or tips/steps very appreciated!

  Thank you

  Hello

  Unfortunately, if the BIOS update fails you can do nothing because the ROM module needs to be reflashed to a technician for laptop

  If you need to contact a service partner in your country and ask for help. Guys can you help get rid me of this.

• Need new battery for Equium A60-173

  Hey guys, I am looking for a battery for my laptop Equium A60-173, but I can only find them for the satellite series even if they have the same battery product number.
  Then would it still be ok for prchase bettery satellite for her?

  Thank you.

  The names of the different specifications are a bit confusing.
  The Satellite A60 Equium A60 and portable very similar. To my knowledge, the satellite was delivered in the UK.

  I studied a little this framework seems to be compatible PA3382U-1BAS 6450 mAh

• Equium A60-173 PSA67E does not start

  I don't have a model Equium: Equium A60-173 (PSA67E-00700C8J) that will not start.

  It tries to start hard drive turns, the fan starts, the dvd drive light flashes, the hard disk light flashes and then he died.

  Battery life is very good, charger/power supply is fine.
  Lights on the front shows the unit is on and the battery is being charged, they all light green.

  I removed everything, left power and removed the battery for an hour, but it still will power not on.

  Any ideas?

  It looks like a faulty motherboard, but it is not easy to say.

  You have already removed the battery and the AC adapter and waited upward at the time, so you have to go to an ASP and ask a technician for help. They can check your laptop and exchanging parts.

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Equium A60-173 does not start after the BIOS update

  Hello people,

  I downloaded a BIOS updated toshiba for my Equium A60 - 173 and while it was loading on, restarted my laptop. Now, whenever I turn it on, the power light comes on for a few seconds, there is nothing on the screen and then it turns off again. I'm really worried, I've done some serious damage. I know a bit of the BIOS, but not that much. I need help, this is how I put a BIOS on here if I can't turn it on and the current one is damaged. Is it possible to get the loaded BIOS on without being able to turn it on?

  Any help will be greatly appreciated! Thanks in advance.

  Concerning
  James

  You could try to remove the battery, wait 2 minutes and then go back, however he only its not very likely that your BIOS update was not successful. If I remember correctly when I flashed my A60-181 this process takes about 10 minutes. If your laptop prematurely reloaded until the program has finished, I'm afraid you have no choice but to send new to Toshiba to be fixed.

  Richard S.

• Re: Satellite L - how to disable touchpad tapping?

  How can I disable the "tap to click" function on the touchpad?

  I've done it before, but it has stopped working properly and I had to reinstall a few days ago, with the default settings. I am autour stumbling in the dark now try to disable the function ' tap to click on "boring.

  I put t know what Satellite phone and OS you have, but on my Satellite L300 I can disable tapping in this way:

  1) go to control panel > mouse > device settings
  (2) select the touchpad and click settings
  (3) on the new window, you must only click on listen and then remove the mark on activate Tapping.

  All that s! :)

• Equium A60 - 173: A the wireless card or not?

  I wana to know either my laptop (EA60-173)
  has the wireless card or not. If so then I can set it up

  Hello

  Each unit with wireless card has a label of WiFi in the lower corner, and the card is also listed in Device Manager. Unfortunately I found the info Equium A60 isn't ready WiFi and only solution is the card PCMCIA WLAN or same USB.

  Good bye

• Where to buy a replacement touchpad? Equium A60

  does anyone know where to buy a replacement touchpad and mouse keys to my A60 as its work stoppage and me have exhausted all attempts to make it work. I came to the conclusion of its U/S

  I can confirm the info provided by Lucky.
  Ask the service point for compatible parts.
  You can find the database just LIKE here:
  http://EU.computers.Toshiba-Europe.com/-> support-> support & downloads-> from the home page find an authorized service provider

• G530 - how to disable TouchPad ' Tap to, click on "feature on Windows 7?

  I've updated an old G530 (4446 23U) with Windows 7 Home Premium 64 - bit last night and all more or less works (noise, wireless, webcam, etc.) but the only thing I'd really like to do is turn off the "tap to click" feature on the touchpad.

  I downloaded the 64-bit drivers for Windows 7 for the TouchPad from lenovo.com, and it did not change some of the features that appear in the mouse settings in the Control Panel, tap-to-click deactivation is not one of the options.

  Any suggestions? Thank you!

  Thank you - hope I don't have to reinstall the operating system since it was a Windows 7 fresh, generic installation already. I'll do the update of the BIOS today and after back so if someone falls on this in the future, they will know the result.

  Appreciate the help!

• Win 7 does not give access to Disable Touchpad tapping function as on the previous Windows operating system. How can we do?

  As above "Win 7 does not provide access for disable touch pad tapping as on the previous Windows operating system. How can we do? »

  I FOUND IT!

  1. go in Control Panel
  2. find the MOUSE
  3. go in the mouse properties
  4. go into device settings
  5. go to settings
  6 uncheck tapping
  It should work for all Windows 7 OS computers laptops!
  This is my first post.  Let me know if it helps!

• Equium A60-173 PSA67E: WLan card supports the Orange Livebox router

  This is my first post so please accept if he is not writing to apologize.

  I have the laptop above and would like to know if it would be compatible with a wireless network card to connect to my Livebox Orange router?

  Thanks in advance.

  Neil

  First of all, are you sure that your laptop is equipped and supplied with the internal WLan card 100%?
  I m not sure but I think that this phone does not support the Wlan?  :|

  In any case, if the minPCI wireless network adapter is not available, you can use an external WLan solution as a key USB WiFi. These sticks are cheap and easy to install.

  I talk to you I recommend checking out the Livebox Orange router specifications. You know what Wlan standard is supported. You know the Wlan standards?
  I mean the standard 802.11 A, B, G or N most recent standard

  B and G standards are best known and no longer supported.

  Well well, to cut this story; You must use the card/WLan USB WLAN which supports the WLan standard even as your WLan router ;)

  Good bye

• Equium A60-173 does not work after bios update

  Computer laptop girls. A lot of windows screen blue/broken files. Who sets. Site Web de Toshiba says 1.8 bios c can stop it again - Web site also announces 1.90 bios. To go with this...

  Tried to Flash the Bios 1.90 which you have to do in the (stupid) windows. Naturally it hangs during the "preparing for the bios update", with only 15% of progress. WAITED a very long time (30-45 minutes) - no progress took place. Had to turn off the machine and had clearly not worked.

  Now the machine will even not respond to the switch. I was expecting a momentary start - but it's like the power switch has been disconnected. Actually attaching the power supply does not even turn on the power light!

  Can a flash failure turn off the machine so much?
  Or would it be another fault (as well!)?

  Thanks for the tips...

  > Not waited a very long time (30-45 minutes) - no progress has occurred. Had to turn off the machine

  Looks like you broke upward from the procedure of updating the BIOS and it's deadly!
  I put t see any other possibility as to contact the ASP in your country for assistance!

  Maybe you are a lucky man and module ROM on the motherboard is not damage and must be flashed only
  Please note that the update of the BIOS is risky! If you use an incorrect BIOS or update wrong procedure can damage the MB

• "ati2dvag.dll" has stopped working on Equium A60 - 173

  I posted this problem before, but despite the advice I got to reinstall the drivers from the Toshiba site. Unfortunately the problem persists. What is happening is that the display shuts off for a few seconds then reappear with a very low resolution, and an error message saying the ati2vag has stopped working. It happens spontaneously, without apparent reason, but if I connect to any type of device memory USB that sometimes "invites" the crash.

  The web search seems to indicate that I am not alone with this problem. Someone at - he found a final solution or explanation as to why this happens, and what I can do to stop it before as I entrust the Tosh in the trash.

  Just another thought, should I delete old drivers ATI through Add/Remove programs before installing the new drivers?

  What is happening on the screen if I delete before reinstalling? Sorry if these are dumb questions, but I'm not computer savvy.

  Thank you
  John

  Hello

  Ati2dvag.dll file belongs to the whole of the graphics card!
  I saw this message on different laptops with the ATI graphics card! Sometimes it seems after a long time the graphics driver malfunctions or does not work as it should!

  Have you tried to use the graphics driver on the site omegadrivers.net?
  Several people have reported an improvement!

  > should I remove old drivers ATI through Add/Remove programs before installing the new drivers
  Usually it of not necessary to remove the old driver first! You can install the new driver on the old!
  In this case he must go into Device Manager and use the update driver option

• Equium A60-173 stops without reason

  My laptop turns off suddenly, it comes to a complete stop, I thought it was the battery had blown or something so I bought a new.

  I put it on and it started working. Everything suddenly after an hour or two use it turns off again. Same thing happens again, just total shutdown, fresh does or anything like that.

  Can someone let me know what is the problem with him?
  See you soon

  In my opinion the laptop automatically stops because it is overheating!
  This is a common behavior if the temperature reaches the critical level.

  The laptop supports protection against overheating and this protection prevents the equipment from damage!

  I recommend that you check the modules of cooling for dust and debris, and if necessary to clean!
  You can do it by using a jet of compressed air!
  Those air sprays you can buy from every laptop or computer!
  Then clean the fans and check if this can help resolve this problem automatically shut downs!

• Equium A60-173: need product Recovery DVD-Rom

  Hey guys, I was wondering where I can buy a product recovery dvd - rom for my laptop and if there is an online shop can you please provide a url?

  Thanks in advance.

  Hello

  The only place where you can order the original Toshiba Recovery DVD is authorized service partner. Please check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye