Equium U400-124 - disk read error

Similar Questions

• Equium U400-124: no CD/DVD drive in my computer - error 10

  Hi newbie so please bear with me. East - the best place for me to post?

  Have a problem with my Equium U400-124 cd player.
  It does not appear in my computer and get an error 10 than TOSCDSPD.exe is not found.

  Searched on the partitioned part of the corresponding data recovery disk,
  suggestions where it could be downloaded would be great.

  Hello

  As far as I know that the file is part of the silent acoustic drive CD/DVD Toshiba
  Usually, you should be able to download this from Toshiba UE driver page but I doubt that the new facility would solve it however try

• Equium A200-1VO - "a disk read error has occurred."

  Hello

  I had my Equium A200-1VO since December 2007 and has never really had any problems with it atall.

  However, last night after a Windows Vista update and restart, my laptop won't start upward. I get a black screen announcing:

  "A disk read error has occurred.

  Please press Ctrl + Alt + Delete to restart»

  I've had no BSOD, and no other suggestion that something was wrong, everything worked perfectly. I checked the HARD drive to see if it had come off his link and reinserted it. But I get the same message.

  I am presented with the only possibility to use the recovery disk, but this means wiping everything out there and start again. I'd rather try to recover my documents before taking radical measures, if it is possible atall.

  If anyone has any suggestions I would be very appreciate.

  Thank you very much

  Mark

  Equium A200-1VO
  -Numtxpackets® Pentiuma® Dual - Core Processor T2310 - genuine Windows® Vista® Home Premium Edition - DVD Super Multi (Double Layer) in car-2 048 (1 024 + 1 024) MB of RAM (667 MHz) - 15.4 "WXGA TFT screen 1 280 x 800

  Hello

  In my view, the error message says a lot: theoretically, your HARD drive may be defective and must be replaced but before that I would test using fitness to drive or another program. Just use Google to find such programs.

  Maybe something was tangled up in your Windows installation. About reinstalling Windows?

  You didn't back up your data to a second drive? I m wondering about this, because the backup should always be made.
  However, if you use an external HARD drive box you can save it on another computer.

  Good luck! :)

• HD recovery folder / repartitioned Equium U400-124

  My Equium U400-124 is a little and a couple of years, I have merged the two partitions to facilitate the storage of the data a bit. This left file recovery HARD drive in a folder named 'merged-partition-content' and all the rest of the main partition of C.

  I now get to a point when I think that I should consider a return to factory default, but the boot process fails to find the folder in HARD drive recovery, and even if I used the hot spare when the computer was first purchased, how he would negotiate the new partition?

  Any ideas?

  When the structure of HARD drive partitions is changed or moved from portable place original HARD drive recovery file will be confused and will conclude not just her more. For this reason, you are not able to start the installation of HARD drive recovery.

  Now you can install Vista original image, I think, using recovery only DVDs.

  If you have some time to read last assignment on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985

  If you have any other questions you are welcome.

• Equium U400 is not reading or burning discs

  My Equium U400 is not reading or burning discs.
  Anyoe can help please?

  Hey,.

  OK, your laptop isn't able to read or burn discs, but does that mean exactly?

  Your drive is listed in Device Manager?
  =>, You can try to remove and restart your laptop.

  Do you see yellow exclamation points in weird Device Manager?
  -Online check the Microsoft Knowledge Base. It s known issue.

  You get an error message if you try Brüning a disc?
  -Online try another program like CD Burner XP burning

  Have you checked the Web from Toshiba site for an update of the firmware?

  What operating system you are using?

  As you can see, a lot of answered no question they would be important in helping you.

• Motherboard for Satellite U400-15E work Equium U400-124?

  Hello

  My graphics card died on my U400 - 124 & I said that the motherboard must be replaced.
  I found one for a Toshiba U400-15 and I was wondering if that will enter my chassis.
  It's ok if I have to reformat my hard drive & reinstall windows.

  Here's what he said on that I found.

  A000060020
  Motherboard Toshiba U400 - 15th

  Compatible with A000027670 A000060020 31TE1MB01N0

  I have attached a picture of my model below.

  Any help is really appreciated

  According to the image of the Equium U400-124 belongs to the series of PSU42E

  Satellite U400-15E belongs to the PSU44E, but both series are very similar, and I guess that the motherboard could be compatible... the presentation of the motherboard seems even if from my point of view of a few you should be able to install this card.

• Unable to hear any sound on my laptop Equium U400-124

  I have laptop Equium U400-124

  recently it stopped my work system all together. If the volume knob is set up, I am unable to hear any sound.
  I tried to update the software of audio drivers by going to Device Manager. then she came back as all up to date. I tried to go back to the date where he worked, but it also did not help.

  Thank you very much

  You can hear sound if you use external speakers or headphones/headset?

  What operating system do you use?

• Satellite Pro 4600: disk-read error occurs - press Ctrl Alt Del to restart

  I have a Pro 4600 which displays the error message "a disk read error has occurred. Press Ctrl Alt Del to restart "as soon as TOSHIBA logo goes.

  The laptop was given to me because the person who had tried to move to XP Pro and don't could not make it work, error with the CD Rom drive and she deleated the old OS (Win2000) off the coast.

  I took the hard drive and did a fresh install of XP by attaching the drive to another computer. The hard disk starts well on the other computer, but I get the error message on the Pro 4600.
  Any ideas. I know that I need to replace the CD Rom, but if I can't make it work, I don't want to drop money in it for a new CD Rom

  Thank you, Bob

  Hello

  Are you sure that the CD drive is dead?
  I have goggled a bit on the net and found some practical information that there may be some HDD malfunction.
  Some guys advised to use the command CHKDSK C: /R to solve this problem.

  But if it's a cd player error, it should be possible to disable the drive in Device Manager.

• Satellite M40 does not start from hard disk - read error

  "I push the button - briefly see the In Touch with tomorrow TOSHIBA screen - then ' + a disk read error occurred press Ctrl Alt Del to restart +".

  I control alt delete brings me briefly on the screen TOSHIBA where I can choose either F2 or F12.

  Do I need a startup disk and where can I get one in order to boot from the CD ROM?
  Do I try to get into the Satellite M40 product Recovery DVD-ROM - this concern for me as the hard drive will be reformatted and all data will be lost.

  I'm stuck please help!

  Hello!

  If you enter the product recovery disc, Windows will be relocated and will be erasing all data on the HARD drive.

  I think that your HARD drive is damaged. You can check this with the Drive Fitness Test. Here you can download:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  By the way: you can save the data on the HARD drive, when you put it in a box external HARD disk. Then you can save the data on another PC, if the HARD drive is ok and have no errors.

  Good bye

• Satellite L305D-S593 - disk read error

  My Toshiba Satellite L305D-S593 suddenly stopped. At first I thought he had a little more heated or something, but when I tried to turn back on it gave me a message saying disk-read error press ctrl alt del to restart. I did several times in the same direction. While I tried to reinstall windows, I got lucky if she showed to the installation screen once it did, I followed the instructions for installation clean (I had to do it once before, but for different reasons).

  Once he brought me to the menu had to select a partition to install on I said to do it on the main HDD after some loading and that time, he said that it was impossible to complete the formatting required. So I Redid the process and I noticed the music said it had 288 GB of available memory, but before that, I had only about 40. To remedy this, I clicked on the format button and it says that it cannot complete the action because the disk is about to fail.

  PS My processor is 64-bit AMD Turion dual core mobile, with 4 GB of RAM

  Hey,.

  In my opinion, it has something to do with the HARD drive itself, I guess that it s a bad sector so Windows Setup can format t HARD drive properly. I mean before you tried to reinstall Windows, the system could not start due to a disc read error. This means that the files on the HARD disk are confused because of bad sectors

  You can install Windows Toshiba Recovery disk?

  If it doesn t work too, I'll try to replace the HARD drive. Usually, it is not complicated and can be done in 5 minutes.
  In addition, you can check the HARD disk for errors with diagnostic tools special as Drive Fitness Test. Google a bit for such tools, they are freeware, so it s no problem to find. ;)

• 0xc00000e9 then a disk read error occurred. Press CTRL ALT DEL to restart

  desktop computer is Compaq windows update.  on restart received status 0xc00000e9 32\ntkrnlpa.exe leader: \windows\ system information: windows failed to load because the kernel is missing or corrupted.  Installed recovery disk, now have "a disk read error has occurred. Press CTRL ALT DEL to restart".stuck cycle.    suggestions?

  shonkg,

  HD can be at fault... do a chkdsk and make sure that your player or files are not damaged.

  http://www.w7forums.com/use-chkdsk-check-disk-t448.html

• disk-read error press ctrl alt del

  I start to load Windows XP Pro and I get an error MSG before it comes to the first Windows XP logo, it reads the disk read error press ctrl, alt, del start I have checked all my connections and cables. I can add another hard drive and use bad like a slave and it starts up fine, and I went to the slave and looked everything I could think of, go back, it just above starts with the same error.

  Hello

  I suggest you get into the Recovery Console and use the where command prompt to run the chkdsk command. This scan the hard drive for bad sectors and recover any information from reading. To get instructions on how to enter the recovery console in Windows XP:
  How to install and use the Recovery Console in Windows XP 
  The KB above also shows how to use the Recovery Console prompt.
  a. Insert the Windows XP startup disk in the floppy drive, or insert the Windows XP CD into the CD drive and restart the computer.
  b. Click to select all the options required to start the computer from the reader, if you are prompted.
  c. when the "Welcome" screen appears, press R to start the Recovery Console.
  d. If you have a computer dual-boot or multiboot, select the installation that you must Access from the Recovery Console.
  e. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER.
  f. type in the following command and press ENTER:
  Chkdsk /r
  g. once the command is executed type "exit" (without the quotes) to exit the command prompt and check if the problem is resolved.
   
  See also:
  http://support.Microsoft.com/kb/315265
  Note:
  
  Warning of Chkdsk.
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• What happens when you get this message a disk read error occurred press CTRL, alt, delete

  I have a blue screen, which has this message "read a disk error occurred press control, alt, delete to restart, and when I do go to the first page of windows then return to the error.

  This should help you: http://www.tomshardware.com/forum/250364-32-solution-disk-read-error-occurred

• A startup problem after that Windows updates were installed and a disk read error occurred.

  I have a laptop Dell Inspiron 9400

  Windows Vista Home Premium SP2 operating systems

  Last night, he showed 16 updates are ready to be installed the automatic updates.

  So I clicked to install the updates as I always do.  I have everything done exactly the same thing.  When updates

  have been made install prompted me to restart now for the updates to take effect.  I have clickedd the button

  Restart now and he acted like he was going to reboot except is went to a blue screen with a message that says:

  A disk read error has occurred.

  Press Ctrl + Alt + Delete to restart

  I tried several times by pushing the Ctrl + alt + del keys to restart my system, it does not start...

  It shows the DELL screen with the loading bar, which is in charge of the left to the right.  It then displays

  Back to the blue screen with the same Message (an office read error)...

  I tried once or twice as the system restart in Mode safe mode (F8)...   This doesn't work anymore...

  He always flashes back to the BLUE SCREEN with the same message.

  Please, can someone tell me why this would happen as a result of the windows updates...?

  How this can be fixed or what should I do to get my back operational system?

  Thank you...

  Shelly928

  Hi Shelly928,

  You can read the following article and try the steps to solve the problem:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Hope this information is useful.

• My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.

  My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.  I can not get to the windows screen, cannot get in safe mode, only the BIOS screen. I managed to get the Samsung recovery screen once, but he said that he did not find the repair disc in! Help, please?

  It is possible that your hard drive is damaged. You can download Windows recovery disk (if you haven't) and run Startup Repair this one.