equivalent questions... not

Similar Questions

• Anyone had any chance to get the 'Chat line' to answer a question, not to mention that the declarant is unavailable...

  Anyone had any chance to get the 'Chat line' to answer a question, not to mention that the declarant that it is not available at this time?

  Nevermind, I got a refund.

• Question not answered on the activation of JavaScript

  There was a question and answer on the activation/deactivation of JavaScript using "subject: config.
  Added another question, which I also have another question in response:

  «Despite my Javascript for Firefox 'active' 23 (I checked the ' topic: config "steps above), certain sites are always asking me to activate my Javascript to view content.»

  I am now running NoScript I know blocks JavaScript, but it was going on until I started NoScript.

  I hope someone can answer this question now.

  Thank you
  Bernadine

  This website message can be triggered by other modules or bad script on the Web site that raises this message.

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

• 3051 a J611 series: Wireless IP address question NOT APPLICABLE

  I lists only the complications I see, do not hesitate to ask for more information. I have been through troubleshooting, all services, reset the printer has been added manually and constantly appears in the allowed list of MAC. Even hear that someone else had this problem would be a relief as I saw nothing indicating past connectivity fail problem.

  The wireless test page results as follows:

  DIAGNOSTIC RESULTS

  > Connectitivity

  -Does not work

  > settings

  -No filtering Fail

  -Channel not working

  CURRENT CONFIGURATION
  -IP address not applicable

  -Configuration not applicable Source

  Hi @mlamkin,

  Welcome to the HP Forums!

  I understand that you have problems with your HP Deskjet 3051 a J611 series printer connection. I'm happy to help you!

  To get help, I'll need some more information:

  • If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  • If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  If you are using Windows, please try our HP print and Scan Doctor.

  Also, I recommend this site, HP Wireless Printing Center - Troubleshooting.

  Thank you for posting!

• Vista and Sony DCR HC32 DV download compatible question - not able to find the driver

  Hello

  My laptop Vista's window isn't able to recognize my Sony DCRHC32 when I use IEEE 1394 or USB cable. It says device not found driver. Of all the posts I've read online, it says Windows Vista and above OS should have all the necessary drivers to download video DV in Handycam. Pleasee Advisor.
  See you soon,.
  Anupsm

  Hey Anupam,

  Welcome to the community Microsoft and thanks for posting the question.

  According the description, it looks like the Sony handy cam is not getting recognized on the computer.

  1. Have you tried the device on another computer?
  2. Have you tried the device to another port?
  3. Has made the work of the unit earlier on the same computer or you try to connect the device for the first time?

  I've provided methods to solve the problem of hardware recognition . Carefully follow each method. If a method does not work, go ahead with the methods following to solve the problem.

  Method 1: You try to run the Fixit.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: Follow the steps to solve driver problems

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  For more reference:

  The hunt for drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

  What to do when your hardware does not work with Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• Challenge IOM not accepting questions not answers involving numbers

  Hello

  When we enter the answer to the questions challenge involving numbers, the system throws insert error failure (screenshot below). It works without numbers.

  Is this a bug in the IOM?

  If not, how to avoid this? Please notify

  

  Thank you

  The column for the response of the database table is varchar2 sense it's text, but when you supply a value like 123 (a pure number), the database will think that you are trying to insert an integer into a field of varchar2. Add the quotes will make think it's the text instead of a number.

  This is probably a bug in programming so if you want to get to the bottom of this, raise a SR with Oracle support, but if you look at the example in more detail, you will notice that he asks for one more month and given suggestion shows the month written in his full name, so in theory if you have followed the example, the answer would be not only a pure number.

  To work around the problem, you can customize your form validation and always add quotation marks to the input values.

• Support the SRM and cost of subscription Question - not technically.

  Hello

  I have a totally technically the question about the Site Recovery Manager. For purposes of budget planning, I need the price for the annual cost of the enterprise SRM SnS and the cost of the SnS of each protected Machine. Unfortunately I found the price list for

  SRM Enterprise (US$ 12375,-) and the cost of the license for each protected Maschine (US$ 495,-) but NOT the cost to the SnS, which is also required.

  Can someone help me?

  THX... Andy

  SnS tends to be 20% of the costs of purchase as a ball park figure, but call your local VMware sales or reseller representative will tell you exactly what is this annual cost.  they are given on a regular basis the list of prices with all the necessary references

• Need advice on section 508 compliance (it is a 'when' question - not a 'how to')

  Hi, I did a lot of research on Section 508 compliance and I'm quite clear on how it is handled in Captivate.  I'm not sure when it should be implemented.

  I have a demo of automatic software that I work, which is basically, autorun.  The user sits down, watches and listens.  There are a few times when there is a user intervention (to click on something to go into another article or something), and I'm totally implement accessibility for items.  What I don't understand not is, do I have to add accessibility to all the other objects that appear on the stage during the automatic execution of the demo part?  For example, if a person with a visual impairment have listened to my demo (the demo all is told) would they really want their screen reader excluding items on screen at the same time?

  Anyone who could shed light on the types of accessibility features that should be enabled during narration, auto-run demos would be greatly appreciated! (Closed captioning side)

  Thank you!

  Vicky

  Basically, the only need yo're addressing is for users visually impaired here, correct? The most visually disabled learners will turn off the audio on a presentation because it interferes with the screen reader.

  The easiest way to test if the demo is available, is to listen to narration or read it without Visual cues. If you find there are elements that are not expressed in the narration that are required for the demo, you can create an equivalent accessible text that describes what is happening on the screen in addition to narration, insert it in the notes slide for your project and create guidelines that highlight this option for learners.

• The more fundamental question - not answered

  I am a potential customer really frustrated.  I want to take my old Compaq Windows XP machine, delete the Junk I don't no need and "migrate" to my new MacBook Pro (the Compaq has a broken screen and works terribly with an external monitor... it is running OK, but the screen issues are difficult to handle, plus I want just a laptop).

  Here is the #1 question, for which I can't find a simple answer:

  1. do I need to install Windows on the MacBook Pro FIRST?

  I think it would be #1 FAQ - I don't want to buy Windows version - what if I do not, and if it must be previously installed before you run the merger, according to me, that I have to buy a new copy (I've updated the Compaq to a retail version of Windows XP Professional, but the used copy had been sitting in the envelope of shrinkage for years in the office... so there NOT all Service Packs.  The Compaq has the installed Service Pack.

  After buying a MacBook and a software to go with it, I'm good with purchase of merger (which looks like a top quality program) - but I REALLY don't want to buy Windows as well (it was not in my budget).

  I searched forums, FAQ, reviews, how - to, from, and there is no consistency to the installation methods.  Most seem to involve using what we call Boot Camp (I've heard of but I'm not familiar with, being a fairly recent Mac convert) to create a Windows partition using Windows Installer disk somehow.

  If it's true, I'm screwed and I have to pay for (I guess) Windows 7 and the basic versions probably do not work for me I am looking at a high price (if I can pass it to Win7 LATER... like 6 mos or so... that's fine, I just can't spend the money now).

  This post is much longer than the answer... I hope.  And if it is a simple 'yes' or 'no' PLEASE put in the FAQ; I have 2 neighbors that have not installed Windows when they moved to Mac recently for exactly the same reason - that they could not understand what the answer was to question my (and their).

  Thank you!

  Jim

  Silverface wrote:

  Are there no a 'yes or no' answer to the simple question "do I need to install Windows on Mac BEFORE installing Fusion?

  NO!

• Questions not no projection in the custom Viewer app

  I created a viewer customized for the iPad application.

  Everything is loaded correctly, but I don't see my questions.

  My problem is set free and public, but still does not show... Please help

  Log in to the Panel Folio Builder the new Adobe ID (that you specify as ID title in DPS App Builder) and create a new folio. To get the items from the old folio in the news, you have two choices.

  (1) use the import command to import the items. This works well if you correctly set up your structure, including the creation of a sidecar.xml file.

  (2) share of the folio of the former Adobe ID to the new. Use the command copy to copy it to the articles.

  Specify the folio of metadata and cover images, and then publish the folios.

• Question not available

  What causes a problem display as "Unavailable Question" in the Viewer?

  I make this with a question as I am preparing to send to Apple.  Works very well in the content viewer, but not in our application.

  Thanks in advance for any help.

  Cancellation of try and reissue of folio publication.

• Questions not selectable answers in quiz slide for some users

  We have a training SCORM Captivate content published on our LMS (SAP Learning Solutions). Some users are unable to answer questions about the content. For these users, the answers are locked and can not be selected. In addition, don't seem not buttons validate and clear.

  The problem about 10% of our users.

  This training contains content and quiz slides slides.

  

  The content is published in SCORM 1.2 (SWF + HTML) with Adobe Captivate 5.5. We had the same problem for some users with the previous version of this training content with Captivate 4.

  All users have the same settings:

  Flash Player 10.3.183.11

  Internet Explorer 6

  Microsoft Windows XP

  Place a button on the first or second slide you need the user to click to go forward with the course.  I've usually place it on a slide that gives an overview of what the module will be about.  Once the user has finished with the slide, they need to click on this button to continue in the content.  The user is not aware that this button has a fixed score and the FACT that it has a score means that Captivate believes that it is part of the questionnaire, which means the scope quiz begins at this time, the first question of the quiz.

  Yes, you click the button, go to properties > reports and select the check box to include in the questionnaire.

• Sound weird distortion on Export - Newbie question not the Compression

  I'm trying the demo Flash CS3 - OSX. (Using OS x 10.4.10.)
  
  I have a timeline a bit complicated with about 8 layers and some alpha fading things and out and a lot of sound samples used as sound effects timeline (forget the term, but attached to the frames don't not streaming). No script writing.
  
  The sounds are too long most for the amount of time allotted to them in the timeline and cut the previous sounds. I speculate that this could be a possible problem. In other words, I said 5 second sound, which has only 3 seconds of time to play, before another sound, he interrupts in the same layer of the timeline.
  
  There are two distinct layers of the sound at the same time.
  
  All original sounds are imported into the film as erroneous 44.1/16 bits. What are mono files (could be another possible problem).
  
  I'm trying to export with 128 k MP3 quality. I tried different variations:
  
  -the compression setting for audio files in the library/setting film export settings to use the settings of the library
  
  -definition of the audio files in the library to use 'default compression' and specifying the correct setting of MP3 128 k in the export settings
  
  - or both of them (individually defined in the library and then overridden in export settings).
  
  I tried with and without the 'single use' parameter (both in the library files and export settings). (This is a question for me: what should be set properly so that when the original file is already mono?)
  
  Sometimes, everything is great. I have test or export the movie and the sound is fine.
  
  Other times I test or export the movie - with exactly the same audio as the last time when it worked - and now get a hissing/cracking sound unbearably ugly instead of the correct sound.
  
  More dangerously - I think but did not quite convince myself - the same export flash file can sometimes play end and sometimes play with the distortion. So I'm not sure if it's a question of export, Flash player problem or combination of export do something semi-bizarre that the player sometimes only chokes on. A 'bad' export is distorted in the desktop Flash Player that comes with the Flash demo, both in a browser with the Flash 9 r45 (OSX) plugin.
  
  
  GUH!
  
  What is the product of $800 which is little more than a Basic for the script text editor and an animation timeline that did not feature update since 1999.

  For someone else to do this...

  It is looking like it is a bug of Flash CS3 app.

  The app is intermittently lose range of the sound/document library settings or just chokes sometimes MP3 Converter trying to convert AIFF to MP3 files on the export of the film.

  Fortunately, it looks like once a .swf movie is exported, it will be distorted or not and is not a problem of random play or player.

  So you can just export several times until you get a 'good' (!).

  I've only got with export MP3 128 k, never with 64 k MP3 to export. For 128K, it seems that fiddling with the sound settings before trying to export can prevent distortion. My best results seem to be:

  -all the wrong in the library, the value 'default - compression.

  -Publish settings of ' event Audio: MP3, 128kpbs, Mono; Substitute uncontrolled sound settings

• Equivalent to not publish from FP

  New to DW and have been a user of FrontPage in the past. Slowly familiarize themselves and I am ready to download some content changed to one of my sites. FP, I can mark individual pages/files do not publish, but I've been through the help files and just can't find an equivalent. I'm assuming that DW allows you to have pages in the local site and not publish to the remote site.
  
  Can someone point me in the right direction? I don't need a complete how-to here, just the words I should use when searching Help or looking in the index.
  
  Thank you
  
  Tom

  
  That's all, thank you. It seems that DW does not allow individual files to be hidden but allows it to files or file type groups.

  I like your technique. Keeps all the new and old stuff in separate folders.

  Thank you

  Tom

• iOS10 questions - Notes app crashing

  After update to iOS10, the notes app was crashing. I noticed the application crashes as soon as it tries to establish the connection to the cloud. The app will work normal if I open the Notes app in airplane mode

  Do you have anyone experience this problem or knows how to solve this problem?

  I think that it is failure.