ERRO utilizando VMware Consolidated Backup

Similar Questions

• VM backup using VMware Consolidated Backup

  Hello

  I have ESX 3.5 Update4

  can someone explain pls howto backup computer virtual using VMware Consolidated Backup?

  Well,.

  There is a "VCB" that can be used in the COS of your ESX by running the command as shell vcbMounter. But most of the people using the Windows package "VCB 1.5" so just install it on any windows machine. Don't forget that you need disk space for storing images FullVM or a connected tape drive is required.

  After installation, change the config/config.js to match your needs. It provides some general parameters and default values. If you use a San or any iSCSI storage do not forget to run "diskpart automount disable" and 'diskpart automount scrub' first befor all required LUNS mounting.

  Now start playing with vcbMounter.exe. Remember that by default I have '-san m "is used which try to read data directly from the SAN. If you do not have a SAN using "m ndb" rather than transfer the data via the ESX host.

  VMware provides some PDF documents on the use of VCB and also the "my learn" section provides useful information.

  DOWNLOAD: VCB 1.5

  http://www.VMware.com/files/PDF/vcb_best_practices.PDF

  http://www.VMware.com/PDF/vi3_35/esx_3/r35u2/vi3_35_25_u2_vm_backup.PDF

  Best HOWTO ever:

  http://VIOPS.VMware.com/home/docs/doc-1392

  Concerning

  Joerg

  "Don't forget if you found that this or other useful answers do not forget to assign points by scoring a useful or correct answer."

• VMware Consolidated Backup, LInux Machines go read-only

  We have a strange problem, the scenario is as follows:

  3 knots x 3650, hba qlogic, Vmware 3.5 Update 4

  1 SATA ds3400 dual ctrl

  1 x 3650 dedicated to the VCB nodes

  A lot from time to time, virtual Linux machines, VCB has completed the backup, rest with the read-only file system, the only chance to solve the problem is to restart the virtual machines: we already checked the vmware tools and are all up to date.

  Any suggestions?

  Thank you very much

  As a general rule, it is not realistic to adjust the waiting times for the LSI or buslogic drivers scsi as they would need to be recompiled. To my knowledge there is no kernel option, you can pass to them on this issue. Some versions of redhat specifically deal with it is bad and flipping in read-only mode. I think RHEL 4 U4 and precedent are touched by this, U5 has been set, and the problem was inexplicably re-introduced in U6 (I hope those updated numbers are right, I have to look back through my SRs to understand). If I were you, I would look at the upgrade to vSphere 4 that has a couple of cool things.

  1. new options scsi (LSI SAS, paravitual SCSI driver pvscsi virtual controller)

  2 VMFS 3.33 (which will require you to reformat your LUN with the new VMFS however) has up-to-date SAN attempts, which means that wait times do not necessarily make the LSI/Buslogic controller in the first place and will be dealt with at the level of the VMFS layer. It is possible that you could put a LUN with the VMFS 3.33 using host vSphere 4.0.0 and not spend the rest of your hosts, but I'm not positive on this one here.

• Veeam backup or vmware consolidated backup?

  What is the best?

  Thank you

  RJ

  We will all live a virtual life...

  Hello

  Certainly VCB is not as rich in features as Veeam but you can compare the two, they take data outside the ESX host and place it on a backup server. You should necessarily not a script to do this with VCB, but it will certainly help! For environments really small hand vcbMounter orders will pass data of the ESX host to your backup host. Then you will need a (even when using Veeam) mechanism to move the backup to a kind of Ribbon, blu - ray or a another backup device.

  Granted in some cases Veeam will also make use of the VCB to make its backups and Veeam combined with VCB is a pretty good combination.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• VMWare Consolidated Backup question

  I always get the following error message when you try to run postbackup.bat after a successful prescan.bat:

  Error "VcbMounter" 7268 - could not read information take it apart.

  For this reason, I have always supported my virtual machine using only prescan.bat images.

  2 questions:

  1. is it OK for prescan.bat nothing else work later (I did about 3 backups of image of vcb of my vm in the last 6 months)

  2. What can cause the error when you try to run postbackup.bat for stored virtual machines?

  Thank you!!!

  If you run a backup of FullVM, the post is not required. Disassemble the VCBmounter process and will automatically delete the snapshot. The post script is necessary for a file backup to take it apart and remove the snapshot. Take a look at my VCB 'Guide proven practices' on VI:OPS-> http://viops.vmware.com/home/docs/DOC-1392 he explains the process for you.

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  http://Twitter.com/dconvery

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• Back up a computer using VMware Consolidated Backup virtual

  It is possbile to save a virtual machine that resides on a SAN fiber while the VM is off? I try to use VCB on our Virtual Center (also our backup server) server.

  Thank you

  enter in replace ipaddr: mode of name?

  Instead of ipaddr: type name:

  And use the VM name in vCenter Server

  André

• VMware Consolidated backup

  Can someone help me to download the product, VCB, and ask in there if there is a license to buy

  VCB license is included for all the editions of vSphere except free ESXi.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• VMware Consolidated Backup - availability of Essentials Bundle

  I would like to know if VCB is available to group the essential items or I need to install the standard or advanced of ESX versions.

  Thank you.

  WarlockArg

  VCB is available with all versions of ESX license.

  VDR (as written before) only and essential Plus, Advanced, Enterprise and Enterprise Plus.

  André

• Installation of VMware Consolidated Backup with vRanger connection - first installation

  I want to install VCB (for the first time) that will be integrated with Vizioncore vRanger connection.

  Does anyone have a better practice and document installation on the installation of the VCB process?

  Also someone with experience integrating connection VCB with vRanger?

  Thank you all...

  Follow the instructions of vizioncore.  They pretty much say on complete installation.  This is the best practice.

  vRanger connection works very well with VCB.  Install connection vRanger first then install the VCB proxy for vRanger connection.

• ISCSI LUN can support backup VMWare Consolidation?

  Dear all,

  ISCSI LUN can support backup VMWare Consolidation?

  Could help you find some documents for this?

  Thank you

  Dennis Dai

  see page 22 of http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_vm_backup.pdf

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Consolidated Backup with pre-existing NetBackup Master

  Hello

  We try to set up Consolidated Backup (v1.5). We already use Netbackup (version 6.0) for all our physical machines.

  All of the documentation, it seems that install us VCB, Consolidated Backup Integration Module & NetBackup server. The documentation goes on to suggest that we install NetBackup master server on the Proxy. But we would like to use our existing NetBackup master, which has storage on tape already connected etc.

  Are we able to install NetBackup as a client on the Proxy and hang it in an existing NetBackup master?

  Thanks a lot for all the help on this

  It depends on how you wish to save. You can create a multimedia server and install the framework it. You could install on the master server, or you could install it on a client computer. The client machine must also the administration console installed if you go this route.

  I wrote two guides around VCB. One is generic-> http://www.dailyhypervisor.com/2010/01/15/setting-up-vcb-for-any-backup-software-revisited/

  One for NBU and vRanger connection-> http://communities.vmware.com/docs/DOC-11417

  Dave Convery, VCDX

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  http://Twitter.com/dconvery

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• Error while you're using backup consolidated backup

  Hello

  We are facing a problem with the servers while using backup consolidated backup.

  When the backup runs through scritp, it just create a snapshot of the server of th. and the name of the hard disk goes from the original for example abc1.vmdk to abc1 - 000033.vmdk

  There are several snapshot files. Like this.. which is not allowing us to make the backup

  I tired to change name to onec .vmx files HARD drive system startup and original. but its still looking for the other snapshot, VMDK fies

  PL. help.

  Thank you

  Smail

  If you go into the directory of the virtual machine and "mv vmname.vmsd vmname.vmsd.old", then delete all the snapshot files since you can not use the more anyway, then you should be able to successfully take a snapshot of the virtual machine and then delete it (aka "remove all" in the Snapshot Manager).

  In the future, just move the file to another name vmsd, then create a snapshot and delete all snapshots. and it should solve your problem.  Starting the virtual machine on the "basic" disk will result in losing you any data that was in the virtual machine, since the first snapshot was taken.

• ERRO AO FAZER O BACKUP

  O computador parou to repent reiniciou o windows e dia 21/07.

  Desde then quando tento fazer o backup (backup and restore system pelo) ele da o seguinte erro. : the system cannot find the file especified 0 x 80070002.

  Desde then o meu e o nao funcionam but SUN JAVA ADOBE, ja desinstalei e instalei again mas quando executo estes programas nao nada acontece. No internet Explorer appears only the MICROSOFT VM e nao appears o SUN JAVA

  JA Verheyden o computador com antivirus nao tem e virus, ja I tried varrer o sistema quando ligo o computador, ele diz o seguinte. : find corrupted files, but could not solve some of them... details are included in the CBS.log newspaper

  Hi Elisabete Raulickis,
   
  Unfortunately, the community of Windows 7 is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
   
  http://support.Microsoft.com/common/international.aspx
   
  Error code: 0 x 80070002.
  
  If you have the Windows 7 operating system, I suggest you to visit the Microsoft Knowledge base article mentioned below.
   
  Error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281  

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• ESX 3.5 Consolidated Backup

  What software for proxy box would be easier to manage and configure? I want to save all the VM via a connection ISCSI via Virtual Center 2.5 with VCB

  I am currently using Arcserve 11.5 for backups.

  I've been looking at other products there IE. VRanger Pro and Netbackup connection. But if someone has experience with 11.5 Arcserve and work I'd really appreciate any advice or suggestions that you could give me.

  Thank you

  I used TSM and Symantec Backup Exec.

  TSM, I think it's a bit convoluted.

  Symantec Backup Exec worked very well.

  See you soon,.

  Pablo

• Backup vmware images

  Hello

  How can I save the vmware image if my customer wants to buy CA BrightStor Backup version 12?

  I think that VCB moving forward will be is no longer supported, so what solution can there be reached if I want to use VCP?

  Thank you

  Take a look on:

  Backup solutions for VMware ESXi (fine also for ESX)

  VMware vs VMware Consolidated Backup data recovery

  If you also have the physical system or a lot of application, cosinder to use a backup program of tradition with the specific VMware agent.

  Otherwise, consider Vizioncore vRanger connection or Veeam Backup.

  André