VM backup using VMware Consolidated Backup

Similar Questions

• Back up a computer using VMware Consolidated Backup virtual

  It is possbile to save a virtual machine that resides on a SAN fiber while the VM is off? I try to use VCB on our Virtual Center (also our backup server) server.

  Thank you

  enter in replace ipaddr: mode of name?

  Instead of ipaddr: type name:

  And use the VM name in vCenter Server

  André

• ISCSI LUN can support backup VMWare Consolidation?

  Dear all,

  ISCSI LUN can support backup VMWare Consolidation?

  Could help you find some documents for this?

  Thank you

  Dennis Dai

  see page 22 of http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_vm_backup.pdf

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Can not power on VM after restore acronis backup using VMWare Converter

  I've restored a VM for VSPhere 5.1 using acronis backup VMWare Converter. The conversion completed successfully, but the virtual machine does not start and I get the following error message. Any guidance is appreciated

  An error was received from the ESX host turning on VM Testdns.

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/deb7682b-d932a578/DNS Test/Testdns/Testdns.vmdk'

  Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  Indeed IT loks like a problem with the used file format (twoGbMaxExtentSparse) hard which is no more supported with ESXi. Your options are either convert virtual disks using the command-line vmkfstools on the ESXi host (in this case, you must load the VMkernel multiextent module) or by downloading the hard files and convert them using vmware-vdiskmanager command-line utility. Another option is to download the virtual machine on a local system, and then use VMware Converter to convert to the ESXi host.

  Useful URLS:

  virtuallyGhetto: 2gbsparse Disk Format No Longer Working on ESXi 5.1

  VMware KB: Cloning and virtual machines with vmkfstools disks conversion

  VMware KB: Repair of a virtual disk Workstation 7.1 and Fusion 3.1

  André

• ERRO utilizando VMware Consolidated Backup

  Access to the nao estou fazer backup HOST um utilizando o programa abaixo:

  
  

  VMware Consolidated Backup

  
  

  Appears as seguintes erro messages:

  
  

  [2011-05-03 14:22:58.274 ´vcbMounter´ 8048 error] Error: Cannot open the disk: NBD_ERR_GENERIC

  [2011-05-03 14:22:58 ´vcbMounter´ 8048 error] An error has occurred, cleaning...

  [2011-05-03 14:22:58.382 ´vcbMounter´ 8048 error] Unable to perform to dismantle, cleaning pping.
  

  Ah beleza, so alegria

  Por favor, atribua os pontos, arrow o topico, assim ajuda a Word e.

  Valeu um abc.

  needing so much e postar AI than many EU.

  ABCs

  Post edited by: MauroBonder

• Can I use VMware vSphere Hypervisor™ with vSphere Client?

  It's the question next poped upward.

  -Can I freely use for my business need VMware vSphere Hypervisor™, and what will be the difference with VMware vSphere Starter Kit?

  and

  -Can I use VMware vSphere Hypervisor™ with vSphere Client software for free?

  Yes - it is freely permitted, but he he has limits and lack of features compared to the vSphere Essentials kits. Another thing to note is the absence of vCenter Server to manage multiple ESXi hypervisors with the free version. The backup API are, in my opinion, one of the main obstacles to the use of this.

• Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  I want to create a virtual machine using VMWare Converter 4.0 from an Acronis True Image to ESXi Server 3i .tib backup file. The conversation seems to be working, but when I try to start the virtual machine, it begins to start, displays the Windows 2003 splash screen briefly and then fails with a blue screen with the following error:

  STOP: 0X0000007B (0XFFFFFADFD520F3C0, 0XFFFFFFFFC0000034, 0 X 0000000000000000, 0 X 0000000000000000)

  Looking through the forums I've seen this error mentioned with 64-bit Windows 2003, but no mention of 32-bit?

  Any help much appreciated.

  THX

  > Thanks, unfortunately the .tib Acronis True image files do not work with Converter 3.0.3

  You already have a virtual computer that start - it's just bluescreens - so no need to run the full convert again.

  Juist use Converter 3.0.3 to configure the virtual machine - part seemed to have failed

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Windows 7 - using VMware installation start the DHCP server

  Original title: Question

  When I try and install windows 7 using vmware its Dungeon rather start the DHCP server and then start from the selected ISO file I selected

  

  Hello Cordy,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  In addition, you can also contact VMware support for assistance.

  See this link:
  http://www.VMware.com/in/support.html

  Thank you

• Problem with windows using vmware fusion

  I have a mac book pro and a part of it running windows 7 using vmware fusion. It worked great for 3 years and today I went to open the side windows and all I get is windows media player. Any button I go, medial player arrives. At Christmas, we received an e-mail that fedex was unable to deliver a package, and to download the shipping label to follow, it is phishing so could I have downloaded a virus? How to do this problem?

  Thank you

  Debbie

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question.

  I suggest you to consult the steps mentioned in the article:

  EXE by default association problem windows7
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/exe-default-Association-problem-Windows7/6becdf43-28d2-4eb5-B3E8-a7fcd0b5c69b

  Hope this information helps.

• Problem with Council box using VMWare-KVM

  I asked this question in the player forum of work stations, but there doesn't seem to be anyone there know about VMWare-KVM, so I hope for more luck here.

  Re: VMWare Workstation 12.1 player when I start a virtual machine using VMWare-KVM I am constantly presented with the message box "press pause to switch between virtual machines and the host - show no suspicion again." I tried to check "do not show again suspicion" but this has no effect. I tried the deselection of VMWare-KVM - preferences. Once again no effect. I imagine that there is a line that I can add a...\roaming\vmware\preferences.ini which will disable it. Does anyone know what would be the format for this?

  Thanks PBreeze

  Hello

  Welcome to community work station!

  I'm sorry. I think it's a bug in vmware-kvm on Windows 7. I can reproduce the problem on Windows 7 with 12.1.0 Workstation. But it works well on Windows 8.1.

  Temporary workaround configures it in the preferences file you mentioned. Add below line to % APPDATA%\VMware\preferences.ini:

  hint.vmkvm.usageHint = "FALSE"
  

  I'll report a bug of product for it. Thank you for bringing This problem to us!

  Kind regards

  Shawn

• The execution of a command shell using vmware cli

  Is it possible to execute a command using vmware cli? I want to

  1 download a script on the server esxi - sharp put

  2. run and it would create results. - ?

  3 download results - lively get

  As demonstrated above, part 2 is not clear how. My guess is that, because of the security, it will be possible. But I want to make sure I'm not missing something.

  Let me know if you know a way out using the cli or other alternatives.

  To achieve #2 I can think of a few things, most are quite hack-ish, however:

  1. you can use plink.exe or another automateable ssh client to connect to the host and run the script.

  2. use vivid for tΘlΘcharger the/var/spool/cron/crontabs/root crontab file, change it to run the script and download it again

  3. it is a non supported VIB that adds arbitrary execution of shell to esxcli:

  http://www.v-front.de/2013/01/release-esxcli-plugin-to-run-arbitrary.html

• Issue of stop start to use VMware player 6.3.0 and a .iso file

  When I power on a virtual machine using an image (Ubuntu 7.04) .iso file in VMware Player 6.3.0 or VMware Workstation 10.3.0, startup stops at certain places and does no more.

  I saw the screen below first,

  

  Then I restarted the VM and I saw the screen below.

  

  I checked the settings of the virtual machine, but have no idea of what is wrong. I don't think that there is no mistake on virtual or physical machine or version number. The .iso file is reliable as well. Could someone help me?

  I solved the problem only by changing to use VMware Player 4.0.6 not version 6.3.0. It was probably incompatibility to halfway...

• How to create a computer virtual file VHD using VMWare Player?

  I created a .vhd file using disk2vhd which contains my drive system (a Windows 7 installation). I would like to create a virtual machine using VMware Player of this image, but I have been unable to do. Can someone help me?

  Thank you very much

  Mike

  You were quite right about the execution of my VM from an external drive USB - no problem at all.

  Today experiences confirm that:

  (a) I can run my VMS on Windows 7 and Windows 8 from an external USB

  (b) VMPlayer can create files hard greater than 2 TB in size (on Windows 7 and Windows 8 guests)

  (c) I can't reach my Data.VHDX file on my Windows 8 host

  (d) I can set up as a shared folder inside my VM on Windows 8

  (e) I can copy files from the shared folder to a drive on my virtual machine.

  Certainly, this closes this discussion - thanks a lot for your help.

  Mike

• Internal error of the View Composer. Contact your administrator. After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool

  Hello.

  Some panic here.

  After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool

  I get internal error View Composer. Contact your administrator.

  Help, please.

  Best regards

  Peter

  Hmm

  Apparently available allow was to be done by right-clicking in the pool and enable provisioning on the Provisioning... tab. Not on the status button in the overview of Ddesktop pools.

  Dang.

  Best regards

  Peter

• Could View Client local Mode use "VMware workstation?

  Hi all

  I want to test the function transfer server and install the Client with local mode, but it shows a message as an attachment

  Because I didn't not use local mode still works, if I have a question, is the image of the local mode could used "VMware Worksatation?

  

  Thank you!!

  wyldkao

  Yes, localmode is using a modified version of VMware Player/desktop to virtual computer runs locally and is in conflict with a version installed locally.

  Linjo