erroe code OX800703EE to try to back up my computer

Similar Questions

• Whenever I try to back up the computer I get an error message: Catstrophic failure (0x8000FFFF).

  Original title: irremediable failure?

  Whenever I try to back up the computer I get an error message: Catstrophic failure (0x8000FFFF).  I don't know how to solve this problem.

  Hello

  1 have had any changes made to your computer before this problem?

  Please, try the following methods and check if it helps:

  Method 1:

  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".
  http://support.Microsoft.com/kb/973558/

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Hope this information is useful.

• With the help of Windows to the top. -J' changed my settings on the page to backup several times, and now when I try to back up my computer it keeps default.

  TODAY, I CHANGED MY SETTINGS ON THE BACKUP OF THE PAGE WITH THE HELP OF WINDOWS BACK UP TO SEVERAL TIMES AND NOW WHEN I TRY TO BACK UP MY COMPUTER AGAIN, HE GUARD DEFAULT.
  I HAVE WINDOWS VISTA PREMIUM 64 BIT.
  I WOULD APPRECIATE YOUR RESPONSE

  Hello

  1. do you receive any error messages?
  2. what exactly happens when you try to backup data?
  3 have. what settings you changed?

  Please answer these questions. This will help us assist you better.

  Try to perform the clean boot.

  Refer; http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• When I try to back up my computer using windows 7, it does not recognize the dvd in the player as a removable device. I had windows vista Home premium sp1 without any problem. I have compaq presario sr-5610f

  Compaq presario sr5610f

  How is your question about the Windows Update feature? Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can not back up my computer, or use Windows Proformances system check

  When I try to back up my computer or let windows create a system image and save, it will only create the system image and I just get an error message, I think this all started when I started having problems with my (say unavailable event log)

  Hi Frederic,.

  Write to us with the following information.

  (1) what is the accurate/complete you get error when you try to perform a system image?
  (2) that monitor performance of the system do you want to?

  (3) do you have any third-party security software or antivirus installed on your computer?

  (4) did the problem started recently?

  (5) as 'use of Windows System performance check' what are you referring?

  (6) are you referring to any utility troubleshooting? If so, then what convenience store?

  You can follow the links below.

  Backup and restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/backup-and-restore

  What is a system image?

  http://Windows.Microsoft.com/en-in/Windows7/what-is-a-system-image

  Write the asked information. We will help you to come.

• When I try to back up my files to an external hard drive I get error code 0 x 8000700020 how to stop what is happening

  Original title: Ox8000700020

  Hi, when I try to back up my files to an external hard drive I get error code 0 x 8000700020 how to stop what is happening

  Double post: http://answers.microsoft.com/en-us/windows/forum/windows_other-performance/ox8000700020/3c708968-5d37-40dc-97ef-2a44b72ca5fc

  I have merged the new post with the original question.

  -steve

• code 646, every time I try to update my computer it keeps giveiing me erroe code 646

  every time I'm trying to update my computer it keeps giveiing me erroe code 646

  ratcehtboi,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121>

  Let us know if this helped.

• Try to install adapt it on XP, I get this erroe code 0 x 80070003

  I get this erroe code 0 x 80070003

  Please visit the web support Fix It and see if they have any troubleshooting suggestions for their product.

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• 00000641 error code when you try to install WindowsUpdate

  I get unknown error code 00000641 and Windows Update_Error code 80070641 trying to install WindowsUpdate_ KB982726 there seems to be no easy way to solve this, only some sites telling me they can solve this problem, so they try to make me buy their wonderful software for fix it.

  DIFFICULTY of Windows IT tells me that he has no problem HHHEEEELLLLPPPP! :)

  Ian.

  Hello

  1. what difficulties did you try?
  2. don't you make changes on the computer before the show?
  3. were you able to install some other updates on the computer?

  Method 1:
  You can try to set up your computer in a clean boot state, and then try to install the updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists then you try the steps from the link:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

  Method 3:
  Manually, try to install updates from Microsoft Download Center link provided.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=27393

• 2230 error code when I try to uninstall my WD Smartware.

  I received the 2230 error code when I try to uninstall my WD Smartware. How do we uninstall it?

  Hello

  ·        Are you referring to Western Digital software Smartware backup or Western Digital hard disk partition?

  ·        You are able to uninstall other applications?

  ·        How do you try to uninstall Western Digital Smartware?

  So what is happening with this Western Digital Smartware software, you can follow this link where user had similar problem.

  http://community.wdc.com/T5/my-passport-for-PC/remove-the-VCD-from-my-drive/TD-p/7066

  You can also post your question in the Community of WD for assistance.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

• I get the 0x8004230F error code when you try to backup in Windows 7.

  Original title: code 0x8004230F

  Backup do not work! I got the 0x8004230F code. What do I need to do?

  Hello

  1. don't you make changes on the computer before the show?

  2 have you installed third-party backup utility?

  3. what kind of backup do you run?

  4. you receive an error message with the error code?

  Follow the mentioned methods:

  Method 1: Check if these two services are running:

  A. Volume Shadow Copy service

  B. backup Windows

  Also to ensure that their dependency services are running. You can check this information from services.msc. Follow the steps below to check the services.

  (a) go to start and type services.msc in the search box.

  (b) search for both services.

  (c) make a right click on the service, one at a time.

  (d) select Properties.

  (e) go to start type.

  (f) select Auto

   

  Method 2:

   

  Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right-click cmd, and then click Run as administrator.

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to save and check the result.

  For more information on 'Check a drive for errors' please visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: For security, try to manually back up data before a disk check. Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3:

   

  Step 1:

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Step 2:

   

  Also try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, followstep 7 in the link provided to return the computer to a Normal startup mode.

  For more information on the "backup of your files' visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  I hope that helps!

• I get 656 error Code when I try to download my updates to the windows desktop.

  I get 656 error Code when I try to download my updates to the windows desktop.

  Do you mean * 646 *?

  See:

  http://support.Microsoft.com/kb/2258121

  Very popular.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• 646 error code when I try to update the following.

  Update of security for Microsoft Office Word 2007 (KB2251419)

  Download size: 8.9 MB and

  Update of security for Microsoft Office System 2007 (KB2277947)

  Download size: 2.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security vulnerability in the 2007 Microsoft Office System and the Microsoft Office Compatibility Pack that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/2277947

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A vulnerability of security in Microsoft Office Word 2007 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/2251419

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  I tried update 15 times and it continues to fail. I also downloaded the two files separately and they still stop at Midway through the update. I also tried the advice given here. There will be nothing of these updates no matter what.

  Here is the notice that has been developed for your error Code:

  Error 646:

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner