Error 0x800423f4 with SBS 2008 Backup

Similar Questions

• SBS 2008 backup automatic Wizard fails cannot configure the backup schedule

  I need to install a new drive for backup for SBS 2008.

  The new drive is 3 T. The backup requires 567G.

  The Backup Wizard fails with the message "cannot configure the backup schedule.

  I looked on the MS Support and the only link is related to the target being too small. Although does not here apply.

  The log file indicates that the operation failed because "the critical volumes cannot be excluded", but I included C drive in its entirety. There is a system drive D, but it is not available in the backup configuration.

  Any suggestions?

  Thanks in advance

  Murray

  It is a forum for specific consumers.

  You will find support for SBS in this forum-online http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver

• Directory issues active with SBS 2008. Cannot use NTDSUTIL or management tools or make changes to the DNS.

  In July 2010, I've migrated a SBS2003 system to a system of SBS2008. There were a few hiccups along the way, but eventually everything worked very well and the original server was demoted and closes.

  Fast forward to today, June 2013, and now that I see errors in the event log that read:

  «This server is the owner of the following FSMO role, but considers that it not invalid.»

  "This directory server has not recently received replication of a number of directory servers."

  And when you run NTDSUTIL I can't join the domain controller by name or the domain name. I always get the following error message:
  "Error DsBindWithSpnExW 0x6ba (the RPC server is unavailable".

  I have read and tried all the imaginable solutions I could find. However, the difference between my situation and all the other scenarios that I have met is that there is usually another available domain controller. This isn't my case.

  Here is my configuration:

  1 - SBS 2008 Server.

  7 - workstations running Windows 7 Professional

  I can't run Active Directory users and computers, Active Directory and approvals, or make changes in the DNS. However, DNS is working and my domain controller points to itself as a single domain controller and resolves the name to the IP address.

  That I could track down, it's the original domain controller does not correctly downshift and there is always a ton of references to it in Active Directory, but I can't run any tools to remove the reference and seize the roles.

  Is there someone out there who can help you?

  Thanks in advance for your suggestions

  I would recommend posting your query in the TechNet Forums. This forum is dedicated for windows servers... We'll find a solution much more effective here...

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Very slow loading of pages with content flash in IE11 in networks of SBS 2008/2011

  Hello

  I have three different customers. Both of them have one with SBS 2008 and SBS 2011 with Win7 Pro 64 clients with Win7 Pro customers.

  These two environments use the default folder Redirection of installation by installing SBS.

  In all these networks, we experience recently that loading web sites with Flash (for example online newspapers) content has slowed down considerably when you use IE11 (Chrome/Firefox works fine).

  To disable Macromedia Flashplayer in IE Addons, the browser can speed up to normal again.

  I tried to reset IE, delete all temporary files and reinstalling Flash, but always without success.

  I assume that others have problems with this as well, as it happened in the three different networks for me...

  Any suggestion is appreciated.

  Update: IE11 reinstalled and the speed is high and will yet :-)

• Can I use VM created on SBS 2008 host on a host of XP SP2?

  I created the virtual computer on a pc with SBS 2008 home of OS. Now, I installed XP Pro 64 - bit SP2 on this same machine and I want to open these virtual machines. That would be possible? Or I need to reinstall the virtual machine?

  No you can use. Just copy and open the virtual machine and run...

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• Need help with the error of the EFS for SBS 2008

  I get the following for encryption: "year error occurred applying attributes to the file", then "strategy of recovery configured for this system contains an invalid recovery certificate" for encryption on SBS 2008.  Server doesn't let me encrypt on our network.  Our certificate on the server says it is valid and run cipher/r does not solve our problem.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• SBS 2008 STOP: c000021a [fatal system error]

  I found myself, it's a pretty irritating position.

  My SBS 2008 Server has failed and cause me a lot of pain in the process.

  There was a fairly comprehensive backup plan in place, Acronis image (daily), picture Windows system (per day) and Bexec.

  The last test DA we have worked well and I was able to restore the acronis on a virtual machine and start.

  Now, we actually had an error that none of the backups work! All with the same error inside a virtual machine and a physical hardware code.

  The error is:

  

  Action taken:

  Catering to VM

  Load the SBS support to repair the system (it prompt for the password for the Admin user.) Didn't know that he was SBS with AD, we used a different account.)

  Download offline NT password, select Admin and password empty

  Load the SBS support to make the system repair, sfc scan & chckdsk

  Do some reg settings so it does not restart when it BSOD (still can not managed to do a memory dump well.)

  All returned without errors and fine.

  A restart of the same mistake.

  Tried all F8 options, all with the same error. Even safe mode!

  Can anyone suggest me please a few alternatives to get it online so I can connect.

  I had to reinstall the server from scratch so that it is up and running but some settings that I need to the virtual machine that I just thought that I would be able to restore from a previous backup.

  Rob

  Hi Robert,.

  My apologies for the delay in response.

  Issues related to Small Business Server are taken in the TechNet forums. Please ask your question on the forums.

  Hope the information is useful.

• Backup Exec 12.5, ESX 4.0, SBS 2008

  Hi all

  This is probably a discussion experienced; so apologies if this is the case.

  I installed ESX 4.0 on a Dell T710 recently.

  On that note, I installed SBS 2008 as a guest.

  The Dell server has an internal LTO 4 tape drive; who can see the prompt.

  But Backup Exec 12.5 can't seem to write the date on the tape. It fails every time.

  It generates the following error: "an invalid command was sent to the storage device ' "

  It is apparently a known issue. VMware does not support such a together until I think. So is Symantec.

  What are my options?

  Thank you

  CT

  If you are looking for a solution that can work, first try to use a SCSI device.

  Add the SCSI ID of the tape of the virtual machine.

  If it doesn't, try again with VMDirectPath:

  http://www.VMware.com/PDF/vsp_4_vmdirectpath_host.PDF

  André

• SBS 2008 cannot connect with the admin account

  Hello

  I have intalled SBS 2008 on my server. Yesterday he installed updates, now I can't connect using my administrator account (it says wrong user name and password). The only way I could log in with my credentials is hollow in Safe Mode.
  The server is used as a controller of domain, MS Exchange and the file and printer sharing. None of these processes work properly. I can access the drives mapped to the user's computer and Office does not connect to Microsoft Exchange.
  I appreciate any help you can give. Thank you.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• SBS 2008 compatibility with OS windows XP/7

  If the server at my workplace computer is running windows SBS 2008, and we have 2 clients running Windows XP Professional, I can configure three new customers with Windows 7. I'm not sure that the it guy who has implemented the network upward originally stated that any installation of computers in the network must run XP and could not be equipped with Windows 7. This system was the installation in July last year, and I am not interested in the purchase of new operating systems for existing customers of 2 and am not able to source XP for 3 additional guests I want to Setup. There will be compatibility problems with the configuration of computers with different OS, and they are all still will have the same functionality with respect to the initial configuration (IE still using the http://connect) and remote access

  Your problem would be probably better suited to the Microsoft Technet forums, located at the:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  They are better directed at Windows Server and other professional level products, repost your problem it would give you better results.

• Problems with Windows 7 backup error "set up the image of the backup task is corrupted or tampered with (0 X 80041321)

  * Original title: trouble with Windows 7 backup

  I upgraded to win 10 and found out, that it was inappropriate of me, came back to Win 7. Tried to run backup after returning and received this message.

  "set up backup".

  The task image is damaged or tampered with

  (0 X 80041321)"

  Hello Michael,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted backup settings.

  Please refer to the suggestions of Hamidou K replied 27 December 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-backup-error-0x80041321/d0ed6e45-76a5-4B50-a094-02eb12d26c8b

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Exchange Server 2007 SBS 2008 Service Pack problems

  I am server running Exchange 2007 on Small Business server 2008 (SBS 2008). I tried to install SP2, but it omits the two windows update and manually. Can someone tell me first what version I am running?

  Help / form displays the Exchange Management Console:

  Version 08.01.0436.000

  And repairs on Exchange Server from programs and features shows 2007 SP1 setup. So I think that SP2 to be then I also ran SP3 but it does not work.

  Here are the lines to the end of a journal:

  [05/03/2014 08:54:13] [0] Setup will run the task 'uninstall msipackage.
  [05/03/2014 08:54:13] [1] Setup launched task 'uninstall-msipackage - logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' - '24b2c164-de66-44fe-b468-a46d9d5e6b31'-PropertyValues ProductCode' BYPASS_CONFIGURED_CHECK = 1 DEFAULTLANGUAGENAME = FRA "
  [05/03/2014 08:54:13] [1] start of treatment.
  [05/03/2014 08:54:13] [1] 'PackageName' property is 'EXCHANGESERVER.msi.
  [05/03/2014 08:54:13] [1] remove the MSI package with the code "24b2c164-de66-44fe-b468-a46d9d5e6b31".
  [05/03/2014 09:09:01] [1] [ERROR] an unexpected error
  [05/03/2014 09:09:01] [1] [ERROR] failed to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. Fatal error during installation. Error code is 1603. Last error reported by the .msi package is ' could not open key: UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613.   Check that you have sufficient access to that key or contact your support team. '.
  [05/03/2014 09:09:01] [1] [ERROR] fatal error during installation
  [05/03/2014 09:09:01] [1] end of the treatment.
  [05/07/2014 19:45:17] [0] end of the installation

  There is a registry key to match and used for the configuration administrator account has access to it, I think? What does this newspaper?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows SBS 2008 - user is unable to RDP in even through that it's in the appropriate groups

  Hi guys,.

  Problem: A user has been accidentally deleted from a Windows SBS 2008 server running Active Directory and we have been unable to grant him the rights of RDP - the error message indicates that the account must be granted "logon through Terminal Services right.

  The installer: A single Windows SBS 2008 server running hyper-VM with a unique virtual machine on it which manages the TS licenses

  Tried to bugs/more information:

  Things that we tried to do to solve the problem (all done via Active Directory users and computers)

  • He added to the administrators and remote desktop users groups
  • He added to the users group to the remote desktop on the virtual machine (the account can now connect to the virtual machine at least)
  • Cloned an existing account on the primary server
  • Removed and added the account through the SBS console and added to the admin and RDP groups (on the dedicated server and virtual machine)

  None of them seems to have solved the problem. There are currently 2 free licenses of TS, so I don't think it's a licensing issue.

  It's almost as if there is a top group policy setting or similar which replaces the user groups is added to, but I don't know where to look for here.

  I've already made sure that the user do not have TS access turned off in the settings of the user's

  Any suggestions?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Vista Ultimate on a SBS 2008 domain, Linksys DMA2200 - managed to do work and why

  I could get my Linksys DMA2200 to connect to a Vista Ultimate computer joined to a domain on the first try!

  Well, let's be realistic. On my 200th test or almost, but the first test after I came across an idea.

  Let me turn away from strategies area, firewalls and all the rest.  It really has nothing to do with him apparently, except to the extent where you may not have done something stupid to put in place certain exclusions.

  I have not really decided if I'll put it immediately in the public domain or if so, when.

  Just to tell you that the support Linksys said, it couldn't be done, but it can.

  Check out my blog for updates on the publication of this information, or on my website.

  Well, I had a bit of a missed out on the first DMA2200 and just got a replacement.  I have everything working fine now (with the exception that after 2-3 minutes, the box freezes if it is connected to the Media Center, just play a DVD or waiting on parameters).

  Here's how to work with a computer joined to the domain, at least one running VIsta Ultimate Edition and SBS 2008, but I think it will work in general.

  1. On the field, create a user as follows:
     1. User name is Mcx1.  Note that this is the same as the local user created on the computer of MC.
     2. The password does not appear to matter.
     3. Make the members of the following groups:
        1. Directors
        2. Domain users
        3. Remote Desktop users
  2. On the Vista Ultimate computer, make sure that this domain account is configured for the computer and displays these groups.
  3. Disable user account control.  If it is enabled, the Extender to connect but then unplug immediately. An error event 107 will be published in newspapers of Media Center files.  It is the dialogue of the authorization request which causes this error and disconnects from the Extender.

  That's all.  At some point during my reading/struggle to make it work, I got the Mcx1 local account as a member of administrators and users to the remote desktop, but when I did the re-install, it is no longer the case and it works fine.

  For info, I have an ATI-wonder tuner attached to the VIsta box with a cable card, and the image on the HD and encrypted channels is great with just the connections component and 1080i.  Works exactly as you think it should.

  Now if I can only operate for longer than 2-3 minutes without having to restart...

  Hope Linksys pays attention when they said it was impossible.

  Best, Larry

  If anyone has any ideas on the gel in question, let me know.

• Install SBS 2008 and Documentation systems management tools

  Hello

  I use the GDPS 5.4 rev A00 drive try to install SBS 2008 on a PowerEdge 2950III server. The process works very well and I chose the server 08 x 64 as the operating system. Once it asks me the disk he thought for a second and shows the following error message;

  Script: C:\remindpopup2.vbs
  Online: 123
  Char: 4
  Error: A device attached to the system does not work.

  Code: 8007001F
  Source: WshShell.Exec

  [OK]

  I found an updated version of the rev A00 5.5 GDPS, but I can only download the last two iso files.

  Is there anyone help any with this problem before I try to call Dell?

  Just remove all mapping for SAN, fixed yesterday 09/12/2012 and remove raid in case if you don't have a SAN, we M610 blade servers