Error 0x800704c8

Similar Questions

• Error code: 0X800704C8 (cannot install updates)

  XP: I get a 0x800704C8 error message when you try to access the windows updates (it seems to me that this error message is not recognized by Windows)

  Assuming Windows XP 32 bit SP2 or later version...

   

  Restart, and then log on as a user with administrative privileges.

  Difficulty your file or registry permissions...

  Ignore the title and follow the subsection under
  "Advanced Troubleshooting", titled,
  "Method 1: reset the registry and the file permissions.
  http://support.Microsoft.com/kb/949377
  * will take time
  * Skip the last step (6) - you should HAVE SP3, but if not, not fixing

  now.

  You may see errors go even if you watch, count upwards.  NO.
  worries at the moment.

  Restart, and then log on as a user with administrative privileges.

   

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  SuperAntiSpyware
  http://www.SUPERAntiSpyware.com/

  Restart, and then log on as an administrative user.

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  MalwareBytes
  http://www.Malwarebytes.com/

  Restart, and then log on as an administrative user.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx

  You find nothing, you will only find cookies, you may think that it is a
  waste of time - but if do you these things and report back here with what you
  / don't think you do all that - you add more parts to
  the puzzle and all of the picture just may become clearer and your
  problem solved.

  Restart, and then log on as an administrative user.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Restart, and then log on as an administrative user.

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your drive C:\.  After you have saved in the
  root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'run.) --> Click on NEXT--> select 'I agree' and click
  THEN--> when it completed the installation, click "Finish"...

  Restart, and then log on as an administrative user.

  Visit this web page:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ... and click on the "Microsoft Fix it."  When asked, select "RUN."
  both times.  Check the box "I agree" and click "next".  Select the check box
  to "Run the aggressive options (not recommended)" and click "next".  Let
  He finish and follow the instructions until it does.  Close/exit and
  reset when it is.

   

  You should now perform a full CHKDSK on your system drive (C :)...)

  How to scan your disks for errors
  http://support.Microsoft.com/kb/315265
  * will take time and a reboot

  You should now perform a full defragmentation on your system drive (C :)...)

  How to defragment your hard drives
  http://support.Microsoft.com/kb/314848
  * will take time

  Restart, and then log on as an administrative user.

  Uninstall applications from any third party firewall (ZoneAlarm, etc.)
  and use the built-in firewall of Windows only.
  Restart, and then log on as an administrative user.

  Open Internet Explorer and visit

  http://windowsupdate.Microsoft.com/ and select to make a
  CUSTOM scan...

  Whenever you are about to click on something in these pages - web
  first of all, press on and hold down the CTRL key while you click on it.  You can
  release the CTRL key after clicking on each time.

  Once the scan is complete, select that ONLY updates of high priority
  (deselect all others) and install it.

  Reboot again.

  If it worked - try the web page - selection not more than 3-5 a
  time.  Reboot as needed.

  The optional software updates are generally safe - although I recommend
  against the 'Windows Search' one and all of the "Office Live" those or
  "Windows Live" which for the moment.  I would like to avoid completely the
  Optional hardware updates.

  Seriously - do these things.  It's like antibiotics - do not skip a single
  step, don't leave because you think it will be ok now - review
  until the end, until you have done all given in the order shown.  If
  you have a problem with a step to ask and let someone here, you get
  Thanks to this step.  If you do not understand how to bring one back
  and ask here on this step and let someone guide you through it.

  Then - actually - that everyone here knows if it worked for you - or if
  you have more questions.

  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• I am currently using Windows Vista. I face a problem that I can't remove all the files in the form of MPEG-4. Error with code 0x800704C8.

  I am currently using Windows vista. I face a problem that I can't remove all the files in the form of MPEG-4. And the error with code 0x800704C8. What should I do so that I can delete these files? Please kindly help me to solve this problem. Thank you.

  original title: Code 0x800704C8...

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you follow the link and check.

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  Step 2;

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

• Windows 10 could not download on Windows 7 upgrade - 0x800704c8 - 0 x 90017 error code

  Windows 10 could not download update win 7 Home dir - 0x800704c8 - 0 x 90017 error code

  I can't understand how to solve this problem.  Download stopped first at 97% and showed the above error code.  Download the second time that the download stopped at about 35%.

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Impossible to re - install App Game of Wild Tangent, 0x800704c8 error code.

  Original title: error0x800704c8

  I had Wild Tangent game App downloaded with my downloaded games, had a problem with the game so intend to uninstall and reinstall that is suggested for the problems, made a mistake and uninstalled the application, now when I try to install game app even once, it will not connect. I tried restore but does not always connect. I managed to download the game and app but still will not connect even when she still on my programs. In my attempt to connect, I'm afraid I have to change a few settings that I should not have. Help please

  Hello Gloria,

  To provide the proper resolution, I would need more information on your side.

  1. What is the accurate and complete error message?

  2. do you have a problem during the installation of other programs?

  This problem can occur if the program was not completely installed or uninstalled, the computer or due to problem of Windows Installer.

  I suggest you try the procedure described in the article and see if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Note:  After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Check out the link for more information.

  Troubleshoot installing or uninstalling programs
  http://Windows.Microsoft.com/en-in/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• SUMIF error

  I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

  In cell F1

  = E1/if(E1>0, 20, 1)

  fill down as needed

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• Display Rotation error

  Hello

  I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

  I wanted to know if there is a lasting solution to this problem.

  I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

  Hello PavanGJ,

  Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

  Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

  OS X El Capitan: If you have problems with startup items

  You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

  You can also test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

  Let us know if that helps.

  Take care!

• A fact error 4014 showing each time after all the steps

  One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).

  I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?

  Thank you for your help and appreciate it.

  I found the solution. Just type here for others with the same problem to solve their problems.

  While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.

  Thank you for your support and more.

• Playgrounds are learning to code 1 download error

  I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift.  Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL.  I uninstalled and reinstalled the soft playgrounds several times.  Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well.  How can I bypass or fix this error and get the first playground of lesson?

  

  Finally, the playing field is downloaded successfully!

• Error Java Run After downloading the new Sierra

  

  Java is up to date and I get this error message. A couple of times, I have "updated" restarted. Still happens.

  Hi cjshrad,

  Thank you for contributing to the communities of Apple Support. I see in your message you receive a Java error after upgrade to Sierra on your Mac. I'd be happy to help with this!

  First of all, try to install the Java for OS X package found here:

  Download Java for OS X 2015-001

  The next step, if you still see this error, I recommend that you completely uninstall Java from your Mac by following the steps listed here:

  How to uninstall Java on my Mac?

  Once you're done, use this link to download and install the latest version of Java for your Mac:
  Download Java for your Mac - Apple Support

  Take care!

• "error recovery main area".

  Hello

  I can not access my old video files of my 6 16 GB iPhone, I'm using iOS 10.  When I try to open the videos that I always meet the message 'area main-fetching error' I can't specify when this problem started, but I'm sure it was good when I was with iOS 9.3.3 However, recently filmed videos works perfectly.

  Same thing here. I bought the new iphone and took the backup from your old phone, but the videos do not work.

• App Store connection error

  Am having a problem of signing in the App Store and iCloud on Preferences system on my MacBook Pro, getting an error response whenever I tried signing in.

  Here are the errors:

  

  

  1. Are you sure that you typed your password correctly 100%? (sry, but that would be classic
  2. have you tried to reset your password?