error 0x800f0214 y 0x000006be installing print server

Similar Questions

• error 0X800f0214 when you install the printer driver

  When you install a printer driver (network), an error message appears saying that the action could not be completed - error 0X800f0214. The printer is shared and my firewall is set to off. I have absolutely no idea on what to do and would like to get advice and INFO.

  Marc DS,
  It would be useful to have a bit more information, such as the make and model of the printer, what version of Vista you are running and what type of network - wired or wireless (or both), if there are other non-Vista on the network computers, etc.  You get the error message corresponds to "the specified path does not contain any applicable device INFs" which means basically the location where the OS is looking for the driver file does contain a valid driver file.  There could be several reasons for this, but without knowing the configuration of network and printer, it's hard to identify.  Make sure that the driver is one that is suitable for this printer model and your version of Vista and make sure that the path (c:\ - or other) is correct and that the location of the driver file is shared.  I hope this helps.  Please post back with more information if you still need help.

  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 0X800F0246 when installing printer drivers.

  Original title: error code 800F0246 on the installation of update

  I'm trying to install the driver for my printer Samsung ML-1860 and get an error code 800F0246.  I also tried to install a driver for the Samsung CPL-315 and it would not install either

  Hello
   
  (1) were there any changes to the computer before the question?
  (2) what exactly happens when you try to install the CLP-315?
  (3) is the model number of the second printer you are trying to install Samsung CLP-315?
   
   
  See the methods mentioned below and check if that helps.
  
  Method 1:
  Clean boot the computer and try to install the printer drivers
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following step 7 of the above mentioned link.

  You can download drivers from the link below and check if it helps.
   
  ML-1860 monochrome Laser printer
  http://www.Samsung.com/ie/support/model/ml-1860/XEU-downloads
  
  Printer Laser Color CLP-315
  http://www.Samsung.com/us/support/owners/product/CLP-315/XAA
   
  Steps to download and install the printer driver.
  a. click on the above links and select downloads.
  b. Select the driver from the drop-down and select the universal print driver for Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) in the case of Mono Laser Printer ML-1860
   
  c. Select the driver from the drop-down and select Print Driver (Driver) for Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) of Printer Laser Color CLP-315.
   
  (d) download and install the driver and check if it helps.
   
  You can also download the drivers via Windows update, see the link below
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

   

   

  Method 2:
  You can contact Samsung support to get help by following these links:
   
  http://www.Samsung.com/ie/support/model/ml-1860/XEU
   
  http://www.Samsung.com/us/support/owners/product/CLP-315/XAA
   
  Click on the above link and click Overview and on the right side of the screen, you can find support options.
   
  Hope this information is useful.

• Status: \t10.0000 MEMORY ERROR POWER + can not install printer

  Hi I have a printer HP Laserjet P1102w. I have changed my router and my laptop and now am not able to install the printer on the new laptop and router.

  I tried to install from HP Smart setup via a USB cable. When I do that, I get an error message saying that the installation failed and advising me to turn off the printer, turn it back on and try again.

  I tried to reset the printer, the default settings, and then print a test page and using the IP address to access the printer. An error message says:

  Status: SUPPLY 10,0000 ERROR MEMORY

  I tried without taking this into account and going to the HP Smart Install tab, and setting up a printer in this way. When I did, I get a similar error message before saying that the installation failed and advise me to turn the printer off, turn it back on and try again.

  Could someone advise me please on what to do? Should I spent trying to get the installed printer, and then try to correct the error memory power or correct the error memory power and then try to install the printer? I am a little hate to buy a new toner cartridge, if after doing this, the printer may not always settle.

  Thanks in advance,

  Paul

  Very good information.  Since this printer is having such a bad plug try to reset the printer first.  I have provided a link on how to restore the default printer. I had a similar with this printer problem, until I installed a very recent firmware update.  This is how I was finally able to do so, install and connect:

  1. Clicking on the tab drivers and software at www.hp.com/support and typed in my name of the printer (P1102w Laserjet) and press the Enter key.  Then, I chose my operating system (you will need to know if the type of your computer system is 32-bit or 64-bit or I would provide a link).
  2. As part of the installation of the Driver and product, I installed the drivers and software HP Laserjet full feature and proceeded to the installation using the USB key to the wireless configuration.
  3. After the test page printed, the printer disconnected from the network, so with the USB cord still attached, I went to the same download page and install the latest firmware update: Version 20130213, which went very well, I might add.
  4. Then, I went on the Start button and select all programs > HP > series HP Laserjet Professional P1100 > Configuration Wireless and finished get my printer connected to my network.

  I strongly suggest the update of the firmware.  I hope that this information helps out you.  Try the above steps and if this does not work please let me know.  I look at the error message once you're able to get installed it.  Maybe when you restore the default printer you can restart the computer if you are running low on available memory, where the error message.

• Errors in the charge installing vcenter Server 5.5 with respect to the SQL database

  I do a new install of vCenter Server 5.5 on a new Windows 2008 R2 server. The database for this facility is pointing at a 32-bit Windows 2003 SP2 server. I installed SQL Native Client 10.0 on server vCenter Server 64-bit, and then I could make my DSN ODBC 64-bit connection. The vCenter Server install could very well recognize it, but after the installation got going he wrong on the database with the following error:

  Error 25003.Setup cannot create vCenter Server repository. The main reasons for this failure are:

  -The database is installed using insensitive case.

  -The database is remote and the client database version does not match the database version. If this problem continues to persist, see KB 1003960 for further assistance.

  Well, I know that the version of the client and the version of database do not match. SQL native client on the sql server is 9.00.5000.00 and the version on the server vCenter Server is 10.50.1600.1.

  I know that this version of vCenter is compatible with an installation of 32-bit sql server 2005 on a 32-bit server, 2003.

  I am not familiar too if they want upgrade me sql native client on the sql server, but is not compatible with the version of sql server on this server and there are several database for other applications on this server, so I don't want to jump into something like that.

  Any help would be greatly appreciated.

  Thank you.

  I install the native client SQL 2005 and give a shot.

• 0001 0002 error message when you install printer drivers

  I get the 0001 0002 error message when you try to install the drivers for a Canon Pixma MX892 printer. Five different Canon representatives tried to find a solution - nothing works. (It seems to be a Windows error message rather than generated by the installer of Canon).

  The error message appears when a) using the disc of Canon or the drivers of its Web site; (b) after a reboot selective; (c) when the Norton firewall is disabled; and d) each combination of a) through c). It also occurs when

  The exact time wherever it occurs during the driver installation process is when Setup "enrolled in the program of information."

  Is the exact wording of the message: an error has occurred while files were copied: 0001 0002.

  I am running Vista 32 bit and download the drivers using Firefox 18.0.2.

  After you have installed many printers without a hitch, it drives me crazy.

  Like you, I thought it was an Epson printer software installation problem and went bought a Canon.  Still I can not install two printers software.  The Epson and Canon customer service can not helped at all.  That's when I decided to contact Microsoft.

  Yes, I paid for the premium service, and I am pleased that they have set all my PC problems.  Takes about 2 to 3 hours to complete the work. I firmly believe that it is worth the money, in my case.

  In any case you can try this free fix by running Microsoft FixIt from this link or copy the address into your browser-

  https://support.Microsoft.com/en-us/mats/windows_file_and_folder_diag/en-SG

  I had also used this FixIt several times since to 'fix' everything OS files were inadvertently corrupt or have "disappeared".  Good luck.

• Error Code 1335 when installing Print artist Platinum

  I am trying to download Print artist Platinum and get the error code 1335.  Suggestions?

  Are you trying to download on the internet or on a CD. This error is normally when the computer is difficuly who try to read a CD, and the solution is to clean the surface with a soft cloth.

• Error when trying to install Print Workshop CD: System Administrator has defined prevention of this facility policies

  message from the system administrator.
  I try to install a cd print workshop, everytime I try I get a message that says "system administrator has set policies of prevention of this facility..." How can I change this? I just installed a pc a few days ago and installed very well game.

  Hello

  Try right click on the setup.exe - then run as administrator

• Error code 28 when installing printer drivers Canon

  Original title: error code 28

  Could not load the driver for the printer Canon MF 3240

  This one?
  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=335&ModelId=12943

  Please ask in the forum material Win7 & drivers .
  http://social.answers.Microsoft.com/forums/en-us/w7hardware/threads

  Bruce Hagen ~ MS - MVP [Mail]

• Error 0X800f0214 while installing MFC-9970CDW printer driver

  Original title: error 0X800f0214 when you install the printer driver, try to install the MFC-9970CDW on a VISTA computer

  can someone help me solve this problem?

  Hello

  Are install you the driver from the disk manufacturer or downloaded the driver on the manufacturer's Web site?

  Download the driver of the manafacturer website and install by keeping the computer in the boot.

  Step 1: Download the below mentioned link driver.

  http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/DLF/download_top.html?reg=us&c=us_ot&lang=en&prod=mfc9970cdw_all

  Step 2: Keep the computer in a clean boot and install the driver.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Network printer error code is 0x000006be

  Original title: code__ printer error

  My network printer is visible.

  Test page does not print

  error code is 0x000006be

  What does that mean?

  Hello
   
   
  1. at the printer installed successfully?
  2. What is the brand and model of the printer number?
   
   
  Method 1.
  Click on repair in the article below and check.
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
  Also do refers to the procedure described in the article below and check if that helps resolve the issue.
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
  
  Method 2.
  If you use a printer HP refer to the procedure described in the article below:
  Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»
  http://support.Microsoft.com/kb/946394http://support.Microsoft.com/kb/946394
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installation of the error on Vista WPS54G printer server

  • Properly installed on XP but on my Vista computer I get message "Set printer Fail. Error Code # 87 "wheninstalling print server driver.

  Try this-

  Open the control panel in Vista and open the "Printers" folder Click on "Add a printer" and at the prompt, click "add a local printer. In the next screen, click "create a new port". On the line 'Type of the Port', use drop down the menu and select "Standard TCP/IP Port" and click Next.

  Under "Device Type" use drop down the menu and select "TCP/IP device. The host name or the IP address for this device will be the address assigned in the tab Protocol on the administration web page. Click on the box that will allow the o/s query the printer for the correct driver and click "next".

  The 'Additional Port descriptive' screen should open. Click on "Custom", then "settings". Protocol = LPR and LPR parameters are: name of the queue = LP1 and check on "LPR Byte counting enabled." 'Active SNMP state' let off. Click here to return to the "additional Port Information.

  Install the printer driver for your printer. Select your manufacturer and model from the list provided and click "Next"... If your printer is already installed, click the button to use the driver already installed. Click on 'Next' and assign a unique name to your wireless print server. Once you are done right click on your printer icon and choose the option "use printer online". Print your Test Page... I hope this helps.

• Printer busy or error; When you work on Windows Server

  I'm working on a persistant problem with a specific printer where I work. A bit of history: first of all, this printer is used by users on WYSE thin clients connecting to a Windows Server 2008 R2 virtual via a RDP session, however, some users connect using Windows 7 Professional. It is a network printer on our corporate domain installed as a local printer on a print server, as well as a local printer on the RDP server in use by the users of the thin client. Now the printer works perfectly for print test pages, Word Documents, etc. However, the problem arises when my users need to print PDF documents, for which they mainly use Adobe Acrobat 2011, although some also use the latest version of the reader (we update player generally that the new versions are available). When trying to print, the print queue will say coil (page 1/2/3, etc.), and then it will immediately change state of printer busy or error. When this happens, until the job is canceled, no other jobs will process, regardless of the type of document. And to further complicate things, one of the main users of this printer says that's not yet each PDF, some and it doesn't seem to be a constant difference between those who does not print and those who will be. The printer in question is a Xerox Workcentre 7345, and I tried to install the latest drivers, PS versions both PCL6 and attempted to use the driver for the Fiery controller, all giving the same result. I installed the printer as a shared printer on the network on the print server, and I installed it locally on the RDP server. Both lead to the same "occupied or printer error. I also tried bypassing the spooler and print the document as an image, both of the separately and with the two parameters defined. I am at a loss, and my users can use is more reliable for this printer to print PDFS... I would like some suggestions on what to do at this point. Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• E.M.P. 11.1.2.1 print server Setup error

  Config FRSetupPrintServer.properties, run FRSetupPrintServer.cmd
  
  find an error in frprint-config - H22.M29.S42.log:
  
  [exec] Occur the error system 1060
  [exec]
  [exec] service not installed
  [exec]
  [exec] Result: 2
  [echo] The Print Server Service was stopped successfully.
  [echo] D:\Oracle\FINANC~1\products\FINANC~1\install\scripts/... \system\files
  [Apply] Result: 3
  [Apply] Result: 3
  [echo] The Print Server Service was started successfully.
  [echo] The Print Server Service configuration was successful.
  
  In the workspace, I can't print PDF report.

  I have the same question about it.
  My OS is 64 bit, EMP 11.1.1.3.0 win2003, ghostscript is 8.7.1 32bits.

  If use the GPL Ghostscript 8.63 32 bit, the problem has been resolved.
  http://sourceforge.NET/projects/Ghostscript/files/GPL%20Ghostscript/8.63/

  Hope it's useful.
  Thank you

• Cannot find the .inf to install HP 5600 print server port

  I try to add a server port to print to my printer HP 5600 on Win 7.

  Go to "Properties of the print server" select port and get message 'new port type' print server ' food printer inf to install the port monitor intilation information. »

  Cannot find the INFs on any CD progrm supplied with the printer.

  How can I add a 'print server port' to the printer if my USB Linksys printserver. This print server works fine on my other computers on my home network.

  Finally found how to manage the Linksys. You must set up a TCP/IP port not a port of the print server.

  Link http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=22034

  complete set upward for win 7

  Bob