Invalid dependency in the distribution

Similar Questions

• REP-34308: reference parameter invalid "CCNGO' in the distribution list

  Dear friends,

  I run the report, which is expected to generate some wise employee of PDF files

  Here is my destination xml file

  < destination >

  < foreach >

  < file id = "a10" name = "/ home/oracle/daemid/forms/payrollpayslips/ccno_ & amp;" & lt; CCNGO & gt;. PDF"instance"this"= >

  < include src = "report" / >

  < / file >

  < / foreach >

  < / destination >

  but when I execute this error code "REP-34308: reference parameter invalid"CCNGO' in the distribution list "is displayed."

  I changed the repetition on the property of the main section of the group where CCNGO are but the same error is thrown.

  Kindly help me to remove this error.

  Manish Manyal

  everything was going well with the xml file and report, except that the result set has been seen 0 records, in this case, this error has been generated, but when I changed the values of parameters so that the Recordset was having more than 0 records, distribution worked perfectly well. so my problem is solved, that x! all of you who have seen my problem.

  Manish

• The change in the distribution of the approved Bill requires re - approval?

  Hi all

  Change the line or the distribution for an approved AP invoice being required re approval?

  As of now any change to the approved invoices relative to the validation needs, but the approval status is the same says he should go to the re approval needs? Please suggest.

  Kind regards

  Thani

  Hi Thani,

  No, change the line or the distribution of approval of the need does'nt of bill approved AP.

  The trust domain depends entirely on the total invoice amount, if the distribution is changed by adding or rejecting some new lines, but total distribution remains the same as previously, trust the domain change to the re-registration needs.

  Basically, when the total amount of the invoice is changed you will need to approve the Bill again and post the invoice but only distribution account is changed you must only post the invoice.

  Please update for any clarification again.

  Thank you

  Hamsa

• OVD Custom Plugin - return invalid authentication to the Proxy Service

  Hi all

  I develop a plugin for OVD. My goal is to call a Service Proxy by using the credentials of a user in TPM. However, in this plugin, I'm calling a Web service and the authentication result depends on the result of this Webservice. For example, if the WS returns 'false', this means that I should not be allowed to authenticate.

  How can I find an invalid authentication at the request of Service of Proxy, using my plugin implementation?

  Thank you very much.

  You can use the bind method:

  BasePlugin (reference APIs Java Oracle Virtual Directory)

  and set it as the

  ' Public Sub bind (String, String, credentials creds, dn DirectoryString,

  BinarySyntax password, Boolean result) throws DirectoryException.

  {ChainException}

  try {}

  Boolean auth is xyz. Auth (uidValue, pwdValue);

  bool.setValue (auth);

  } catch (Exception e) {}

  Logger.info ("exception:" + e.getMessage (), e);

  bool.setValue (false);

  Customization of Oracle Virtual Directory - 11g Release 1 (11.1.1)

  ~ J

• Subselect query returns "invalid identifier", but the nested query return lines

  I don't think it's a general SQL question.

  Select * from persons where person_id in)

  Select person_id with people whose name = 'Obama' - subquery

  ) and age > 18;

  When I run the subquery, I get:

  ORA-00904: "PERSON_ID": invalid identifier

  00904, 00000 - '% s: invalid identifier '.

  * Cause:

  * Action:

  Error on line: column 5: 8

  This is because the table people do not have the person_id field.

  But when I run the nested together query it returns all the lines in people with the AGE greater than 18.

  How is he succeeds when the subquery is obviously wrong?

  363f652b-263D-4418-933F-74a1d0a41b4c wrote:

  I don't think it's a general SQL question.

  Select * from persons where person_id in)

  Select person_id with people whose name = 'Obama' - subquery

  ) and age > 18;

  When I run the subquery, I get:

  ORA-00904: "PERSON_ID": invalid identifier

  00904, 00000 - '% s: invalid identifier '.

  * Cause:

  * Action:

  Error on line: column 5: 8

  This is because the table people do not have the person_id field.

  But when I run the nested together query it returns all the lines in people with the AGE greater than 18.

  How is he succeeds when the subquery is obviously wrong?

  Yes - this is a general SQL question and ask often enough.

  Correlated subqueries depend on the inner query, be able to see and access to the columns of the outer query. Normally see you referenced in the WHERE clause of the subquery and not in the SELECT clause, but the reference is valid in both places. This works because the columns of the tables in the main query are accessible in the subquery. "Person_id" is probably a column in the table 'people '.

  Which can be a cause of problems 'odd' when the column (in your case "person_id") is more of a table.

  Use an alias in the subquery in the subquery and you will find that it will not succeed.

  See these two articles AskTom where he addresses this specific issue

  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:3317493900346468494

  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:155200640564

• Dependent on the table

  Hello
  If I delete a table, then the following, which will be automatically removed by oracle if they depend on the same deleted table?
  
  VIEW (forced the view and the normal display mode)
  SYNONYM
  PROCEDURE
  FUNCTION
  TRIGGER

  904298 wrote:
  all of them will be invalid if the table is dropped?

  NO, now prove me right or wrong.

• Depends on the oracle platform?

  Hi all
  
  I would like to know if the package of oracle RDBMS is operating system independent or dependent.
  Is there an oracle 9i, which will only run on Windows...? or can the distribution even be installed under linux also?
  
  
  Thomas k prakash

  platform game-specific and the ILO.

  That is to say.

  There are versions of oracle on windows 32 and 64-bit.
  There are versions for linux32 and linux 64-bit.

  An oracle linux version will not work on windows and vice versa.

  Check the OTN download page and you will see.

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• Cannot connect iPhone 7 more to iTunes because an invalid response from the device

  I tried to sync my phone to iTunes and I get an error message stating "invalid response from the device. I tried to remove the password, and it still doesn't work. I also tried using a new USB cord. I'm doing something wrong? I can't sync my music or ringtones. Will there be an update to iOS 10 soon to solve this problem? I am extremely disappointed that I can not connect my new phone!

  You use iTunes version 12.5?

  Get the latest version of iTunes - Apple Support

• installed Firefox depending on the instructions on the screen, but cannot connect. Have now added the new user name. How to complete the installation?

  I can't connect or open Firefox. Uploaded by on screen instructions but still cannot connect or use firefox.

  Installation of Firefox is not dependent on the signing in. You don't need a username / password for Firefox.

  Please explain what works and what's not more in detail.

• percentages vertical positioning depends on the width of the block?

  I seem to have found a problem when firefox is positioning of blocks based on the values of percentage margin offsets

  In short, look at this page: http://akos.maroy.hu/~akos/frontend/experiment/awake.html

  the desired size of the image section is 75% of the available area, also well vertically than horizontally. the planned place of the section of the image is so, it is in the Middle, vertically and horizontally.

  If it works horizontally, it seems that the vertical position of the image depends on the horizontal width of the window. If you change the width of the window, the image will move vertically.

  It is not exclusive to Firefox. Your problem is that uses margin-top '%' to mean '% of the width.
  http://www.w3schools.com/cssref/pr_margin-top.asp

• Y at - it somewhere I can find a list of items that is supposed to be running in activity monitor and those that should raise red flags?  I know the list varies depending on the applications and installed process but a base line would be nice

  Y at - it somewhere that I can find a list of explanations or definitions of applications that are running in the monitor of activity as well as a list of items that should raise red flags?  I realize account from the list will vary depending on the applications and programs installed and running, but it would be nice to have a base line of what should be expected and considered safe or normal.  There are too many items to research and one at a time.

  No, not so much.

  You have a problem you're trying to solve?

• Why the distribution is less capacity?

  Seems that I am upset by this * (& ^ * #& ^ % $ box everytime I try to do something...)

  I have a NAS 6 Pro that I bought with the readers of 6x1TB. I wanted to update capabilities by installing the disks 6x3TB. A technical support call suggested the best way was to do a "factory reset", of course, that's what I fact/tried to do the following:

  1. from Frontview, I selected the 'Factory Default' button. When the process started, I was asked to do a few entries to configure the unit.

  2 prior to entry and restart, I removed and replaced all 6 discs 1 TB with red WD 3 TB drives.

  3. in Frontview, I have selected X-RAID2 with fault tolerant disk 2 and press the go button

  4. the process has begun, but that I view Frontview volume settings, it seems that I have will wind upward with a fraction of the available capacity as only 927 GB on each disc is 'allocated' (see screenshot)

  What happens here? Why I don't get the whole of 2 794 each allocated disk GB?

  Thank you!

  

  I executed a second 'factory reset' Frontview and the problem fixed itself. I see (almost) the entire capacity GB 2 794 in the distribution column. It of now the synchronization itself and is expected to be completed in a little more than 12 hours.

• Invalid SIM on the iPhone to Verizon unlocked replacement

  I had an iPhone 6s recently, but lately I cracked the screen, and when I went to Apple Store, they have kindly provided a new phone replacement rather than a replacement of the screen because, they said, replacements of the screen for the s 6 was not yet available.  Then, everything worked fine in the United States for a month or two, but now I came in another country, I put in another known working SIM card, and he at first said "Activation required" (while on another iPhone with the same SIM card it comes immediately started to use the SIM very well).  When I went through the first few steps of activation, he set up a screen that says

  Invalid SIM

  The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you have currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert a different SIM card of a carrier supported or to ask that this iPhone be unlocked by your operator. For more information, contact Apple.

  I then called Verizon and they told me that they do not block iPhones. They said I need to contact Apple.  I called Apple Care, and the person I spoke made me do restore itunes procedure, which incidentally is extremely painful, since took hours and many attempts due to a combination of buggy Internet connection in the hotel, who need to download a set of 2 GB update, iTunes is not not able to resume an interrupted download.  After restoring to iTunes, it gave me the same problem.

  When I called Apple, I asked if the person did not have this problem, and he said he was and that is how solve you that problem, but I don't think he really was.  He is described very well in this other discussion here: Re: SIM not valid but unlocked?

  The message said things need to go to support second-level or senior engineer, etc. and I tried to use that language, but after that just get after triage, I got was a front-line guy who claimed that he could solve this problem. But his "miracle" did nothing.  He also responded when I asked how it happened is something 'glitched' when I put SIM card. but that has been proved wrong when I restored it from a backup that was from the day before my trip, and improved anything.

  Why can't Apple Care reps learn more about this problem and immediately he effectively treat or move users to someone who can? Does anyone know of no official statement of this problem and how to deal from Apple?

  I still support *, until the Sun come up in Cupertino. I'll keep you posted when / if it is resolved.

  Follow-up on my experience since the first post: return of the person to Apple Care kindly called me the next day, and when I pointed out that the same thing happened after I did the restore itunes procedure, but that it has not fixed the problem, he said he had to check with some people there. Then he'll be back on the line and said that they would have to make some changes that can last a few minutes or a few hours to change the 'activation policy.  Then he reminded me a little later and said that I should now make the procedure of restore itunes once more and that should not require downloading 2 GB this time, so it should go a lot faster (and no need to retry), and it should work really this time.  He was right; now it's working.

• How to force the compilation released executable before running the distribution of LabWindows/CVI kit?

  I am new in 2015 of the CVI. I used CVI 7 and when I chose "Create the Kit of Distribution", when I was still in debug mode, Labwindows asked me to build the executable of setting before creating the Distribution Kit. This does not happen to CVI2015, and the Distribution Kit is created with the latest built executable version, although I made a few changes in my code! This is a problem since I work in debug mode and I usually forget to build the executable of liberation before calling the distribution kit, so I need CVI to do it automatically like CVI 7 did. I suppose that there is an option to do this, but I can't find. Can someone tell me please how to resolve this problem and force CVI to build the exe version before building the distribution kit? Thank you.

  Today, I've solved quite simply create a new distribution. The previous like unsing was automatically imported by CVI7 project. By creating a new distribution, now when I change something, CVI ask me if I want to build the release. So I did not understand the problem but I solved it by editing a new distribution kit.