Error 0x800f080d

Similar Questions

• Cannot install vista sp2 0x800f080d error code

  both windows update and stand alone try to install vista sp2 failed with the error code in the title. I searched online and tried many of the suggestions, nothing worked. I removed all a / v software, I used msconfig to disable all but windows applications, I loaded the update for Windows (KB947821). Still no joy. I searched this error code, no entry Microsoft Answers. Yes, sp1 is installed. It's vista ultimate 32 bit.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 - error Code: 800 b 0100 (cannot install updates)

  I get errors 800 b 0100 for KB981852 for a few months.  I just ran the tool ON and my log is below:

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7600.20751
  Version 9.0 package
  2010-09-27 16:23

  Checking Windows Service Packages

  Checking of manifests package and catalogs
  (f) CBS MUM corrupt 0 x 80070026 servicing\Packages\Package_1_for_KB982664~31bf3856ad364e35~amd64~~6.1.1.0.mum line 1: X
  (f) CBS MUM corrupt 0 x 80070026 servicing\Packages\Package_2_for_KB2079403~31bf3856ad364e35~amd64~~6.1.1.0.mum line 1: X
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB981852~31bf3856ad364e35~amd64~~6.1.1.1.cat
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_3_for_KB981852~31bf3856ad364e35~amd64~~6.1.1.1.cat
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB2032276~31bf3856ad364e35~amd64~~6.1.1.0.cat
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB981852_RTM~31bf3856ad364e35~amd64~~6.1.1.1.cat
  (f) CBS MUM corrupt 0x800F080D servicing\Packages\Package_for_KB982664_RTM~31bf3856ad364e35~amd64~~6.1.1.0.mum line 1: supplied in the file
  2010-08-25 03:02:05, DP Info

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) clear CSI impossible catalog check winsxs\Manifests\amd64_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20740_none_607b009642d9c626.manifest 0 x 00000000 amd64_microsoft-windows-smbserver - common_31bf3856ad364e35_6.1.7600.20740_none_607b009642d9c626
  (f) clear CSI impossible catalog check winsxs\Manifests\amd64_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16619_none_363c11500fe837b6.manifest 0 x 00000000 amd64_microsoft-windows-smbserver - v1_31bf3856ad364e35_6.1.7600.16619_none_363c11500fe837b6
  (f) CSI shows Zero Length 0 x 00000000 winsxs\Manifests\amd64_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_118540126d10aa9e.manifest amd64_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_118540126d10aa9e
  (f) clear CSI impossible catalog check winsxs\Manifests\amd64_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.20740_none_369c3bbd29264744.manifest 0 x 00000000 amd64_microsoft-windows-smbserver - v1_31bf3856ad364e35_6.1.7600.20740_none_369c3bbd29264744
  (f) CSI shows Zero Length 0 x 00000000 winsxs\Manifests\x86_microsoft-windows-n-deployment - netfx20_31bf3856ad364e35_6.2.7600.16513_none_3ec13172476c72e8.manifest x86_microsoft-windows-n-deployment - netfx20_31bf3856ad364e35_6.2.7600.16513_none_3ec13172476c72e8
  (f) CSI shows Zero Length 0 x 00000000 winsxs\Manifests\x86_wpf-permregonly_31bf3856ad364e35_6.2.7600.16513_none_f39a5e46c37ca486.manifest x86_wpf - permregonly_31bf3856ad364e35_6.2.7600.16513_none_f39a5e46c37ca486
  (f) clear CSI impossible catalog check winsxs\Manifests\amd64_microsoft-windows-smbserver-v2_31bf3856ad364e35_6.1.7600.16619_none_363141640ff053a7.manifest 0 x 00000000 amd64_microsoft-windows-smbserver - v2_31bf3856ad364e35_6.1.7600.16619_none_363141640ff053a7
  (f) clear CSI and S256H do not match 0 x 00000000 winsxs\Manifests\x86_netfx-mscorees_dll_31bf3856ad364e35_6.2.7600.16513_none_e1a860558b15624c.manifest x86_netfx - mscorees_dll_31bf3856ad364e35_6.2.7600.16513_none_e1a860558b15624c
  (f) clear CSI and S256H do not match 0 x 00000000 winsxs\Manifests\x86_netfx-mscoree_donoteverremove_31bf3856ad364e35_6.2.7600.16513_none_d40cbd7b7e8b574d.manifest x86_netfx - mscoree_donoteverremove_31bf3856ad364e35_6.2.7600.16513_none_d40cbd7b7e8b574d

  Summary:
  Seconds executed: 474
  Found 16 errors
  County CSI shows zero total length: 3
  County of apparent CSI and S256H Do not Match Total: 2
  Manifest CSI has not catalog check Total number: 4
  CBS MUM corrupt count: 3
  Total number of corrupt CBS catalogue: 4

  Unavailable repair files:
  winsxs\manifests\amd64_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.20740_none_607b009642d9c626.manifest
  winsxs\manifests\amd64_microsoft-Windows-SMBSERVER-v1_31bf3856ad364e35_6.1.7600.16619_none_363c11500fe837b6.manifest
  winsxs\manifests\amd64_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_118540126d10aa9e.manifest
  winsxs\manifests\amd64_microsoft-Windows-SMBSERVER-v1_31bf3856ad364e35_6.1.7600.20740_none_369c3bbd29264744.manifest
  winsxs\manifests\x86_microsoft-windows-n-deployment - netfx20_31bf3856ad364e35_6.2.7600.16513_none_3ec13172476c72e8.manifest
  winsxs\manifests\x86_wpf-permregonly_31bf3856ad364e35_6.2.7600.16513_none_f39a5e46c37ca486.manifest
  winsxs\manifests\amd64_microsoft-Windows-SMBSERVER-v2_31bf3856ad364e35_6.1.7600.16619_none_363141640ff053a7.manifest
  winsxs\manifests\x86_netfx-mscorees_dll_31bf3856ad364e35_6.2.7600.16513_none_e1a860558b15624c.manifest
  winsxs\manifests\x86_netfx-mscoree_donoteverremove_31bf3856ad364e35_6.2.7600.16513_none_d40cbd7b7e8b574d.manifest
  servicing\packages\Package_1_for_KB982664~31bf3856ad364e35~AMD64~~6.1.1.0.mum
  servicing\packages\Package_2_for_KB2079403~31bf3856ad364e35~AMD64~~6.1.1.0.mum
  servicing\packages\Package_2_for_KB981852~31bf3856ad364e35~AMD64~~6.1.1.1.mum
  servicing\packages\Package_3_for_KB981852~31bf3856ad364e35~AMD64~~6.1.1.1.mum
  servicing\packages\Package_for_KB2032276~31bf3856ad364e35~AMD64~~6.1.1.0.mum
  servicing\packages\Package_for_KB981852_RTM~31bf3856ad364e35~AMD64~~6.1.1.1.mum
  servicing\packages\Package_for_KB982664_RTM~31bf3856ad364e35~AMD64~~6.1.1.0.mum
  servicing\packages\Package_1_for_KB982664~31bf3856ad364e35~AMD64~~6.1.1.0.cat
  servicing\packages\Package_2_for_KB2079403~31bf3856ad364e35~AMD64~~6.1.1.0.cat
  servicing\packages\Package_2_for_KB981852~31bf3856ad364e35~AMD64~~6.1.1.1.cat
  servicing\packages\Package_3_for_KB981852~31bf3856ad364e35~AMD64~~6.1.1.1.cat
  servicing\packages\Package_for_KB2032276~31bf3856ad364e35~AMD64~~6.1.1.0.cat
  servicing\packages\Package_for_KB981852_RTM~31bf3856ad364e35~AMD64~~6.1.1.1.cat
  servicing\packages\Package_for_KB982664_RTM~31bf3856ad364e35~AMD64~~6.1.1.0.cat

  Should what steps I take to correct these errors 16?

  Additional information:

  This machine was a fresh install of Win7 Professional (ago installed about 3 months).  Running MS Security Essentials - no infections reported.

  Thanks in advance for your help.

  Hello MJCfromCT,

  Thank you for your message.  We will reset Windows Update components in aggressive mode.  Once the reset is complete, run a SFC Scan (instructions are below):

  Click 'Start' > type cmd in the search field > right click on the prompt at the top of the list and select 'run as administrator '.
  Inside the command prompt, type sfc/scannow > press "Enter".

  Restart and test.

  Please let us know the results, we are looking forward to hear back on your part.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update_800B0100, 800F0900, 646 errors for May 2010 updates__

  My system config
  OS - Windows XP SP2
  .NET framework-version 4.0

  Here are the errors on windows update may 2010
  Windows Update_800F0900 - for kb978542
  Windows Update_0800B010-for KB905866
  Windows update_646-for KB976321
  Windows Update_646 - for KB981726
  For 0800 010 B downloaded and run the System Update Readiness Tool - more later (April 2010) - but does not solve the problem, same error gets. Try'd update windows by disabling the firewall, antivirus, but the same error

  CBS\checksur.log - got the message below

  
  CBS\checksur.log

  Checking of manifests package and catalogs
  (f) CBS MUM corrupt 0x800F080D servicing\Packages\Package_1_for_KB905866~31bf3856ad364e35~x86~~6.0.41.0.mum line 1:-size: 9pt;
  color: #444444;
  text-align: left;
  vertical-align: m
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_1_for_KB905866~31bf3856ad364e35~x86~~6.0.41.0.cat
  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_1_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.mum line 1:
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_1_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.cat
  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_2_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.mum line 1:
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.cat
  (f) CBS MUM corrupt 0x800F080D servicing\Packages\Package_5_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.mum line 4:
   
      <>
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_5_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.cat
  (f) CBS MUM corrupt 0x800F080D servicing\Packages\Package_6_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.mum line 4:
   
      <>
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_6_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.cat
  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_for_KB978542_client_1~31bf3856ad364e35~x86~~6.0.1.3.mum line 1: þÿ
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB978542_client_1~31bf3856ad364e35~x86~~6.0.1.3.cat
  (f) CBS MUM corrupt 0x800F080D servicing\Packages\Package_for_KB978542_client_2~31bf3856ad364e35~x86~~6.0.1.3.mum line 4:
   
      <>
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB978542_client_2~31bf3856ad364e35~x86~~6.0.1.3.cat
  (f) CBS MUM corrupt 0x800F080D servicing\Packages\Package_for_KB978542_client~31bf3856ad364e35~x86~~6.0.1.3.mum line 4:
   
      <>
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB978542_client~31bf3856ad364e35~x86~~6.0.1.3.cat
  (f) CBS MUM corrupt 0x800F080D servicing\Packages\Package_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.mum line 4:
   
      <>
  (f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB978542~31bf3856ad364e35~x86~~6.0.1.3.cat

  Checking package Watchlist
  (f) CBS Watchlist package missing 0 x 80070002 Microsoft-Windows-Foundation-Package ~ 31bf3856ad364e35 ~ x 86 ~ ~ 0.0.0.0 Package_for_KB905866_client ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.40.0 presence of registry package failed, possibly an orphaned package on package watchlist

  For 0 x 80070002 tried to rename C:\Windows\SoftwareDistribution SDtemp - but same above errors are appearing
  Pls answer

  Thank you

  Sk22 salvation,

  I suggest you try the following steps to solve the problem of Windows Update (this would take care of every Windows Update error message that you receive)

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Step 2: run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 3: Follow all the steps mentioned in the link below (including the steps that you have already tried)

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002
  

  
  

  Step 4: Download all Windows Update, problems, installation from Microsoft Download Center manually and save them to the desktop

  http://www.Microsoft.com/downloads/en/default.aspx

  Note: You can disconnect the computer from the internet temporarily and perform the steps below

  Step 5: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 6: Put the computer in clean boot and then try to install the update one at a time

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Now try to install the update one by one and let me know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• SUMIF error

  I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

  In cell F1

  = E1/if(E1>0, 20, 1)

  fill down as needed

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• Display Rotation error

  Hello

  I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

  I wanted to know if there is a lasting solution to this problem.

  I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

  Hello PavanGJ,

  Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

  Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

  OS X El Capitan: If you have problems with startup items

  You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

  You can also test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

  Let us know if that helps.

  Take care!

• A fact error 4014 showing each time after all the steps

  One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).

  I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?

  Thank you for your help and appreciate it.

  I found the solution. Just type here for others with the same problem to solve their problems.

  While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.

  Thank you for your support and more.

• Playgrounds are learning to code 1 download error

  I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift.  Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL.  I uninstalled and reinstalled the soft playgrounds several times.  Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well.  How can I bypass or fix this error and get the first playground of lesson?

  

  Finally, the playing field is downloaded successfully!

• Error Java Run After downloading the new Sierra

  

  Java is up to date and I get this error message. A couple of times, I have "updated" restarted. Still happens.

  Hi cjshrad,

  Thank you for contributing to the communities of Apple Support. I see in your message you receive a Java error after upgrade to Sierra on your Mac. I'd be happy to help with this!

  First of all, try to install the Java for OS X package found here:

  Download Java for OS X 2015-001

  The next step, if you still see this error, I recommend that you completely uninstall Java from your Mac by following the steps listed here:

  How to uninstall Java on my Mac?

  Once you're done, use this link to download and install the latest version of Java for your Mac:
  Download Java for your Mac - Apple Support

  Take care!

• "error recovery main area".

  Hello

  I can not access my old video files of my 6 16 GB iPhone, I'm using iOS 10.  When I try to open the videos that I always meet the message 'area main-fetching error' I can't specify when this problem started, but I'm sure it was good when I was with iOS 9.3.3 However, recently filmed videos works perfectly.

  Same thing here. I bought the new iphone and took the backup from your old phone, but the videos do not work.

• App Store connection error

  Am having a problem of signing in the App Store and iCloud on Preferences system on my MacBook Pro, getting an error response whenever I tried signing in.

  Here are the errors:

  

  

  1. Are you sure that you typed your password correctly 100%? (sry, but that would be classic
  2. have you tried to reset your password?

• Error CoreTelephony

  On my iMac (late 2015) El Captain 10.11.6 this morning I started getting this error on the log in "a tracking file for CoreTelephony operation failed, perhaps you miss disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

  Can someone tell me how to fix it? Some of my apps are now crashing.

  M

  I have also this problem too and the same day