Error 0x8024400A when installing Windows updates.

Similar Questions

• Receive 81F error message when installing Windows updates.

  What is error 81F?

  When I install the updates, but when the update is in the State, the installation was interrupted and the windows massage me this error. Please answer this Question.

  Hello

  -Did you change on your computer before the show?

  Follow the steps in this article and see if the problem still occurs.

  Problems with installing updates

• Error 646 when installing Windows updates

  Whenever I try to install the following updates to the window, I get the error 646 answer:

  KB981715 KB980729 KB978382 KB978380

  I use Vista and Internet Explorer

  Sorry, you have problems getting your patches installed. I have a number of things for you to look at.  First of all, are your Windows Update and the Background Intelligent Transer Services set to Automaticand started . You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually.

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx.
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309).
  3) click on the link for the download and then click on download and run.  You must accept the contract agreement, and then click continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) to rerun the update from Microsoft, click find updates.  If all goes well, it will show that you are completely patched.

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or erase viruses can prevent the installation of patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  Hope this helps,

  Barbara

• Error 80080008 while installing Windows updates.

  Original title: suziwhy

  I tried to upgrade to 8.1 windows, but he refused in the end.

  Now, I get a 80080008 error whenever I try to install the updates.

  Can anyone help? Please

  Hi Suziwhy,

  1 are you this error during upgrade to Windows 8.1 or during the installation of Windows updates?

  2. What is the brand and model of the computer?

  If you get this error when installing Windows updates, then it normally occurs because the file Wups2.dll included in the latest version of Windows Update is incorrectly installed or became non registered.

  I suggest you to re - register the Wups2.dll file and check if this solves the problem.

  Follow the steps to re - register the file by using the command prompt:

  a. press the Windows key + X , and then select (admin) command prompt.

  b. run the following commands and press ENTER after each one:

  net stop wuauserv

  regsvr32 %windir%\system32\wups2.dll

  c. now, you will receive a verification message that the DLL is registered. Click OK.

  d. start the automatic updates service. To do this, type the following command at the prompt (admin) command and press ENTER:

  net start wuauserv

  e. type Exit.

  Reference:

  Problems with installing updates

  http://Windows.Microsoft.com/en-CA/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  You can try to install Windows 8.1 after the steps above.

  Also check the link for more information:

  Update to Windows 8.1 of Windows 8

  http://Windows.Microsoft.com/en-CA/Windows-8/update-from-Windows-8-tutorial

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Error code 80070490 when installing Windows updates.

  I GET THE ERROR 80070490 CODE WHEN THE WINDOWS UPDATE IS RUN.
  CAN A HELP ON THIS?
  I READ THE ANSWERS TO MOST OF THE SIMILAR COMMENTS, WITHOUT SUCCESS.
  Thank you
  AMEER

  Finally, I erased the disc & reinstalled the operating system.  The loss of some data, but the problem is finally resolved.  The ONLY solution I could find that actually worked!

• Error code 80070663 when installing Windows updates

  Original title: error code 80070663

  Error Code 80070663 - repeatedly attempted to install Windows Update & get this error code.

  Hi decg,.

  1 Windows operating system you are using?

  2. which windows update you are installing?

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  Step 1:

  You can also view the history of update for updates failed which is causing the problem.

  Check out the link:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Step 2:

  You try to install the updates manually from download from the Microsoft Download Center and check if it helps.

  Check out the link:

  http://www.Microsoft.com/downloads/en/default.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ERROR CODE 80070490 INSTALL WINDOWS UPDATE

  Separated from this thread.

  I GET THE ERROR 80070490 CODE WHEN THE WINDOWS UPDATE IS RUN.
  CAN A HELP ON THIS?
  I READ THE ANSWERS TO MOST OF THE SIMILAR COMMENTS, WITHOUT SUCCESS.
  Thank you
  AMEER

  Hello

  What operating system is installed on your computer?

  I suggest following the steps mentioned in the link and check:

  Windows Update, error 0 x 80070490

  https://support.Microsoft.com/en-us/KB/958044

  It will be useful.

• Error code 80070490 installing Windows Update KB975467, Vista.

  I get an error code 80070490 when I try to install Windows Update KB975467. I have Windows XP, SP2.  All other updates seem to work.  As I searched the forum, recommendations on this error differ and do not always seem to work.  I don't have the installation CD (I lost), the laptop came pre-installed by Dell.  I appreciate your help.

  I get an error code 80070490 when I try to install Windows Update KB975467. I have Windows XP, SP2.  All other updates seem to work.  As I searched the forum, recommendations on this error differ and do not always seem to work.  I don't have the installation CD (I lost), the laptop came pre-installed by Dell.  I appreciate your help.

  Try to run the system update (or CheckSUR) tool to see if it can resolve the error.
  If it cannot, you can edit the CheckSUR.log located atCheckSUR.log Windows\Logs\CBS\
  and maybe we can see what content is not present in the operating system.

  If you do not feel like the troubleshooting update installation failure, you can get assistance for installing Microsoft:
  From: MS09-059: vulnerability in the Local Security Authority Subsystem Service could allow denial of service

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for support questions with security updates, visit the Microsoft International Support Web site:

  http://support.Microsoft.com/common/international.aspx?rdpath=4  

  North American customers can also obtain instant access to unlimited support free of charge e-mail or unlimited individual chat support by visiting the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?&PRID=7552

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Error 0 x 80240036, 0x8024400A, cannot install Windows updates

  Original title: cannot access windows update Center to down load my updates.

  I keep getting these two error messages whenever I try to install windows on my computer updates.

  I have windows XP Home Edition

  Error number: 0 x 80240036

  Error number: 0x8024400A

  Thank you, Bob Taylor * address email is removed from the privacy *

  PS I'll install a new windows XP on my hard drive now. Who could do

  Hello

  Have you done a recent software or changes to the material on the computer?

  I suggest you to check the updates could be the cause of the problem. To do

  (a) go to control panel,.

  (b) click on Add/Remove programs.

  (c) scroll through the list of programs, and downstairs, you will find all the updates that are installed with their numbers categories.

  Provide us with the number if the issue not be resolved after following the methods.

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Try installing updates and if the issue gets not solve, go to the method 2:

  Method 2:

  If the problem is not solve I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  
  How to back up and restore the registry in Windows

  And take note: While running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost.

  Method 3:

  You can also try the steps from the link below if the above methods fail. Run the FIXIT and if it does not help, try the manual steps.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• Errors 8024402C, 643 and 646 when installing Windows updates

  Original title: 22 code 8024402C, 646, 643 update failure
  Just cancelled anti-wear Virus, now uning microsoft and find several updates not installed.

  I just need to know if updates from ore relevant or not.

  Hello

  Updates are highly recommended. Updates can help to prevent or fix problems, enhance the operation of your computer, or improve your computer
  experience.

  Update error 8024402C may occur for various reasons.

  Step 1:

  Check this link for troubleshooting steps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024402C

  Step 2:

  To fix the error 646, you can run the diagnostic article Fixit tool:
  http://support.Microsoft.com/kb/2258121

  Step 3:

  Run Fixit of this article to correct the error 643:
  
  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  After you complete the steps, check if you can install the updates.

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• error code 0x8007F0F4 when installing Windows Update

  Original title: KB2686509 on the XP Home upgrade help me

  Many attempts to install 'criticism' security up-to-date with failure.  I found the 0x8007F0F4 error code.  I looked for resources of difficulty and reinstall but said "no results found" so now that I'm anyone of mercy who can help me with this error code to get this update installed.

  Hello

  You are able to install some other updates?

  I suggest to refer to the article and follow the steps there.

  You receive a "0x8007F0F4" error code when you try to install updates from the Windows Update Web site or from the Microsoft Update Web site: http://support.Microsoft.com/kb/958051

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft: http://support.microsoft.com/kb/322756/ Knowledge Base

  Reference:--

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c

• I get the error code 80070020 when installing windows updates and also my computer crashes a lot. How to fix?

  I'm unable to install all the updates of windows - getting error code 80070020.  Have tried the suggested steps and they didn't work.
  Also can't get with my computer freeze.

  Did you just listed:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates
  http://support.Microsoft.com/kb/883825

• Error code 8024200d when installing Windows Update 8.1 for x 64-based systems (KB2919355) no idea why?

  I get an error 8024200d code when Windows installation 8.1 update for x 64 systems (KB2919355) based on ideas why?

  I tried to install once or twice with the same error message.

  Hi Randy,

  Thanks for the reply with the status of the issue.

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try to install all the updates that are predefined in Windows Updates and also install the latest device drivers and check if that helps.

  Method 2:

  If the problem still persists, then create a new user account and then try to install the updates and check if the problem persists. This is to check if the problem is caused due to the corruption of the user profiles.

  Create a user account:

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Just reply to the State of the question so that we can help solve you this problem.

• Error code 0 x 80246008 when installing Windows updates.

  I've been using Microsoft Update, and currently, I tried to install 30 updates on the current list.

  Microsoft Windows XP

  Update for Windows Media Player 11 for Windows XP (KB939683)
  Update for Windows XP (KB961118)
  Update for .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant 1.0 x 86 (KB963707)
  Update for Windows XP (KB970430)
  Update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168)
  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)
  Update for Windows XP (KB2345886)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604092)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352)
  Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2604111)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2729450)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2742596)
  Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2736416)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2756918)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2789643)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2833940)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2832411)
  Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2840629)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2844285)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2863239)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2861189)
  Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2861697)

  Microsoft Visual Studio 2010

  Update of security for the Package redistributable Microsoft Visual C++ 2010 (KB2467173)

  Microsoft Office 2007

  Update for Microsoft Office System 2007 (KB967642)
  The 2007 Microsoft Office Suite Service Pack 3 (SP3)
  Update for the filter of junk e-mail in Outlook 2007 (KB2760586)
  Updated for suites Microsoft Office 2007 (KB2767916)
  Update for the filter of junk e-mail in Outlook 2007 (KB2817327)
  Update for the filter of junk e-mail in Outlook 2007 (KB2825642)
  Update for the filter of junk e-mail in Outlook 2007 (KB2850085)

  I got the error code 0 x 80246008.

  It seems that I can't install one of them!

  Also on the list, is Windows Media Player 11, I have already installed.

  Is it possible to solve my problem?

  I managed to do work perfectly!

  It seems that the problem was that the BITS service could light up not by any means, so I used Tweaking.com - Windows repair, and it solved a problem!

  Now I have all the downloaded updates and automatic updates works again!

• Error code 646 when installing Windows updates

  Original title : Need help

  I tried to make my windows update, but when he started the update, he said there is an error: code 646. What should I do?

  http://support.Microsoft.com/kb/2258121

  Read the article above, in the resolution Section, you have 2 choices "Fix it for me" or "Let me fix it myself".

  I suggest that set you yourself, however if you do not want to fix it yourself choose "Fix it for me".