Error 100, but using correct Id

Similar Questions

• When I tried the update of lightroom cc2015 I get a U44M2P7 error message. I tried to rename the file update and a new attempt and also update manually but still the same error. I use a mac with os x El Capitan version 10.11.3 any suggestions would be gra

  When I tried the lightroom cc2015 update I get an update of the failure U44M2P7 error message. I tried to rename the file update and a new attempt and also update manually but still the same error. I use a mac with os x El Capitan version 10.11.3 any suggestions would be greatly appreciated.

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• gc_w01_enu_nb.exe extracted from 100%, but Setup fails instantly in winxp pro

  gc_w01_enu_nb.exe extracted from 100%, but Setup fails instantly in winxp pro

  I try to install the full feature driver for my PSC 1315xi on two WinXP Pro PC.

  One worked perfectly.

  On the second, when I run the exe download, I get the message 'Extraction', but when he goes up to 100%, never open the setuup window.  And no error message is displayed.  I searched and found a log file which was produced.  It includes the following:

  GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "
  System LangID = 1033.  mapped to ENU
  # The system language is ENU, but is not on our CD!
  # We couldn't understand a language to use and return FALSE from CICECmdLine::GetLanguage()!
  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "
  Installer returned 1603

  Any help would be appreciated.

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• Greenfield says it's 100%, but nothing happens...

  Just bought and tried to download Adobe Acrobat Standard DC - installer says it's 100%, but it's not moving from here. I am running Windows 7 and use Google Chrome. Any suggestions would be helpful. Thank you.

  unninstall correctly all that was installed.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  uninstall all cc including the cc desktop application, if that's what you call the "install wizard".

  clean your computer of files cc by http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer (do not skip this)

  Reinstall the desktop app cc, https://creative.adobe.com/products/creative-cloud using the compatibility mode (https://technet.microsoft.com/en-us/library/bb456979.aspx?f=255&MSPPError=-2147217396)

  Use the desktop application to install your programs cc

• Download assistant "error 100".

  Hello-can't download Assistant to work... "error 100"... tried to clear cookies, uninstall and reinstall Deputy, all I want to do is try elements, sigh

  There is a document that could help solve the problem...

  Mistake # 10 (whole #): Troubleshoot Adobe Download Assistant:

  http://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-download-Assistant.html#main_Solutio n_2

  As an alternative to the use of the download assistant, you can try to download the trial directly that the page linked below.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 12:

  http://prodesigntools.com/Photoshop-elements-12-direct-download-links-premiere.html

• Error 100 and impossible to activate Adobe Audition

  I just downloaded trial Adobe Premiere, Lightroom, and Photoshop versions using the download wizard. I tried to connect yesterday and today the Assistant to download but I get error 100. My internet connection is fine, my other programs can connect to the internet. I disabled my firewall, deleted cookies from my browser and restarted my laptop with no will.

  I also installed Adobe Audition of the CD today and tried to activate it, but I get an error indicating that it need an internet connection.

  Help, please!

  Please see the solution to troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html

  If you continue to experience difficulties, you can try to start a direct download by following the steps listed in http://forums.adobe.com/thread/981369

• Error when you use the Group feature

  Oracle forms6i
  
  Hai
  
  While I compile my coding it will compile correctly, but when I tried to run I revealed an error in the function of group
  
  my code is
  
  
  If (NTC <>0) then
  Select the BAR code, RESPONDENT, OUTTIME today_bar, today_in, today_out from dail_att where BARCODE =: bar code
  and ATTEND_DATE =: bardate;
  Update dail_att set outtime = max(:bartime) where barcode =: bar code
  and ATTEND_DATE =: bardate;
  
  on the other
  If (cnt2 <>0) then
  
  Select RESPONDENT, OUTTIME in yest_in, yest_out from dail_att where BARCODE =: bar code
  and ATTEND_DATE =: bardate-1;
  
  If (yest_in is not null and yest_out is null) then
  Update dail_att set outtime = max(:bartime) where barcode =: bar code
  and ATTEND_DATE =: bardate-1;
  
  on the other
  insert into dail_att(barcode,intime,attend_date)
  values (: Barcode, min(:Bartime),: bardate);
  end if;
  on the other
  If: bartime between 0100 and 0630
  insert into dail_att(barcode,intime,attend_date)
  values (: Barcode, min(:Bartime),: bardate-1);
  
  Update dail_att set outtime = max(:bartime) where barcode =: bar code
  and ATTEND_DATE =: bardate-1;
  
  on the other
  
  insert into dail_att(barcode,intime,attend_date)
  values (: Barcode,: min (Bartime),: bardate);
  end if;
  end if;
  end if;
  
  while I'm trying this groupfunction it throws error while I use seen tell me how to use the Group feature and where
  to use
  
  Regadrs
  
  Srikkanth.M

  Srikkanth,

  For this you need to calculate the max outside of the update statement and then use this value in the update statement.

  The bartime is a control in the block?

  If Yes, then you need to find the max manually, and if it isn't, then you can write a sub query to find the maximum value.

  Kind regards

  Manu.

  If my response or response from another person was helpful, please mark accordingly

• Zoom is set to 100%, but it is actually blocked on 150%

  My Firefox Zoom is set to 100%, but when Web sites displaying the real zoom seems to be 150%. It came during the test of a new site that was not displayed correctly. We tested with another browser and all Web sites display properly 100% (same computer used for all tests).

  Zoom has been used a few weeks there is room to 150%, is - it possible that even if he says he's now 100% that it is indeed not updated correctly. If I change the Zoom level it seems to work OK except that the display of 100% is very different compared to other browsers, it seems like 150% compared to other browsers.

  Thank you.

  Thank you for your help. I worked through your suggestions when I disconnected my second screen, before be reset something and my laptop is back to 100% on Firefox. Don't know exactly what happened but when I plugged the screen back in it remained at 100 percent. Will play even more and try to find what's new.

  Thanks again for your help.

• Compaq Presario CQ71 - error 1002 when using recovery (windows Vista)

  Hi guys,.

  I just encountered error 1002 while using the recovery... Recovery successfully crossed reformattng my drive, but crashed before reinstaling the original content. It's okay if I'm trying to hard drive or dvd rom recovery, all this translates into error 1002. I did some research and it seems that it is a very common error in hp without adequate solution products. I think I'm out of luck because my warranty expired years ago... How can I solve this problem? For me, it seems that recovery content originally placed on my hard drive (and later burned on the DVD by me) had been damaged. I see 2 possible solutions here:

  -to order an another recovery of the drives together (although I saw a few reviews it did not)

  -buy the new "Windows" and install a new fresh install (I will be able to perform the new installation at all?)

  I'd really appreciate pointers as I really don't want to lose my money for a solution that would work!

  Kind regards

  Robert

  Hello

  You can call the MSFT customer service and they will generally be able to find it for you.

  http://answerdesk.microsoftstore.com/msusa/en-us/answerdesk/answertech

• Lenovo Y 410 - battery doesnot - shows 100%, but dies when disconnected

  Hello

  I have a Lenovo Y410 model, purchased in Nov 2007.It was my mobile favorite and best I've ever used.

  Only since the last morning, suddenly, the battery doesn't work.

  On power options the battery meter shows 100%, but when I unplug the power supply, the laptop dies instantly stops offshore.

  So, click Properties, it shows the battery details and said sound plugged in as well.

  I read some of the sons like resetting the battery indicator / voltage etc. control / battery replacement?

  Someone help me please...

  MARK_LENOVO has help everyone. If you're still here could you please help me.

  This problem happened to my other laptop (t41p) as well. So your help is very appreciated.

  Thank you much in advance.

  See you soon

  Dheeraj.

  battery flat, buy a new one.

• I have xp sp2 installed, I've upgraded to sp3 it settled and went to restart, but used to charge up please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have xp sp2 installed, I've upgraded to sp3 it settled and went to restart, but used to charge up please help

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mapo1477,

  1. do you get an error at startup of the system?
  2 have you tried to start the computer in safe mode?

  If you do not get any error message, then we recommend you to start your computer in safe mode and check if it starts successfully on the desktop. If it starts in safe mode, and then restore the computer. To do this, try the following steps:
  a. see the description of the options course in Windows XP Startup Mode
  b. Once you have started your computer in safe mode, restore the computer.
  See How to restore Windows XP to a previous state
  c. start the computer and check if the system starts in normal mode.

  To install Service Pack 3 successfully, see steps to take before you install Windows XP Service Pack 3

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried all the steps for the error 646, but nothing works.

  Original title: samanthaddzt

  I tried all the steps for the error 646, but nothing works.

  What can I do?

  Have you tried this one from Microsoft Support?

  You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error trying to use remote desktop.

  I'm having a repeatable error trying to use remote desktop in Windows 7 Pro.

  The error I get is:

  Your computer could not connect to another session from the console on the remote computer, because you already have a current console session.

  I don't have sssion another current.  I get this error right after a fresh reboot.  A Mater of fact due to multiple problems, I got with a new computer, I have re-installed Windows on another hard drive to make sure that everything was fresh.  I get the same error.

  I am connected with administrator privileges and I got this error the first time I tried to establish a session.  It's the same problem I had with the other installation of Windows.  Can someone point me to a solution?  I'm relatively new to versions of Windows 7, but not at the earliest.

  Thanks to all who can help.

  Bill

  See what some of these word to say about the problems with the file on your computer and incorrect IP addresses of Hosts.

  Remote Desktop connection - already have a console session
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/6bdafe59-7437-4E02-9139-c22536b8f28e

  Win 7 RC your computer could not connect to another session from the console on the remote computer because you already have a current console session
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/5ce19e8c-DFFB-4BCB-A176-87534993eaa1

  http://www.google.com.au/search?hl=en&rls=com.microsoft%3Aen-au%3AIE-Address&q=%22Computer+could+not+connect+to+another+console+session+on+the+remote+computer%22+because+you+already+have+a+console+session+in+progress&btnG=Search&aq=f&aqi=&aql=&oq=&gs_rfai=

  You domestic Remote Desktop connection slots between and within your own network, or is it a work at home type of connection?

• Need urgent help! -Error, 100 c

  My OS is Vista 64-bit, and whenever I try to boot, it says "Windows is loading files" (black background, below progress bar) and then he goes and comes from the mouse on a light blue background and a message pops up saying "error, 100 c. If this problem persists, please contact HP support. "And when I press OK it restarts and it's on a loop.

  Unable to get into safe mode...

  I think that I caused this by accidentally pressing F11 at startup, and then click the Ramdisk settings or sth.

  Help, please!

  Message edited by SoKMAN on 22/07/2009 14:14

  I solved it anw...

  I used the Startup Repair disk and fixed...