Error blocks the installation of the HP printer driver: slbcsp.dll sccbase.dll, gpkcsp.dll, and Enum.

Similar Questions

• Printer not working, get the error 'Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime '.

  I get following errors: Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime Windows 7

  Please stand out as the answer. What is the number and the model of your printer (Lexmark)? You can try to uninstall and reinstall the printer driver.

• trying to UN-ininstall print driver error message: could not remove the HP LaserJet 1020 driver. The specified printer driver is currently in use. __Failed to remove the hplj1020.inf package. Access is denied.

  I have a new win 7 and have a lot of trouble installing an HP laserjet printer.

  When you try to remove the drivers under properties of the print server, I get the following message:

  "Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
  Impossible to remove the hplj1020.inf package. Access is denied. »

  someone knows what's the problem?  the prnter is not yet connected.  Must not be in use.  The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.

  How can I remove the drivers?

  Stop the print spooler service, and then start the print spooler service.  Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• Windows 7 Desktop w/printer, my desktop XP in network computer, cannot print bc I wonder for the current print driver, I got a current version, but it does not recognize it? How can I get the printer to work?

  I have a desktop computer Windows 7 connected to an HP laserjet 4050N printer, when I try to print from a computer to Office XP, via the network, I wonder for an updated printer driver.  I downloaded the latest print driver, but it does not recognize the file inf and again requests a current print driver.  How can I get the XP desktop to print on the printer connected to the Windows 7 Desktop?

  Hello

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18322&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=25475

  For your reference: How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx

  http://TechNet.Microsoft.com/en-us/library/bb456988.aspx

  To connect to a printer on a network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Hope this information is useful.

• Get the error that the my printer cartridge is incorrect.

  Original title: printer does not print

  I have an error message on my printer tells me I have a cartridge incorect and the message also said the cartridge in the right store not supported.

  I took the cleaned cartridge, it is always impossible to use my printer.i always use the correct cartridges I had these ones a few weeks and have been using them without any problem.

  It is not a Windows problem.

  If you went to the support section of the website for your printer of mystery and searched your all also unrevealed error message, you will find probably the printer manufacturer's advice would be to buy a new ink cartridge "authentic".

  For some printers, you can also find advice on cleaning the contacts in the printer (in addition to cleaning the ink cartridge).

  If you would like that I (or anyone else here) to search for these notices, please specify the brand and model of your printer, and the full text of all error messages, without paraphrasing.

• Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

  Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

  Here's the situation.

  I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

  I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

  Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

  Thank you in advance!

  Maybe not...

  The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

  I looked at your system and found this article that you can read to see if it sounds like your original question:

  Windows Setup could not configure Windows on hardware on this computer.

  http://www.Dell.com/support/article/us/en/19/SLN293812/en

  Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

  Could you take the issue in the Dell online community where experts hang out (especially your amber light).

  Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

  http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

  The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

  If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

• HP LaserJet 4100: Problem with the universal print driver

  Desktop: HP Envy 700-214

  OS: 10 64-bit Windows

  Printer: HP LaserJet 4100 (with a USB to parallel cable)

  I was able to properly use my LaserJet for Windows 8.1 through my Windows 10 crossing (which I upgraded to about 18 months ago).  Quite recently, I welcomed Windows Installer a upgrade, and at this time there, I lost my ability to print.   It has been on my default printer, but gave an error message when I tried to print.

  I tried to "Add a printer" and selected the HP 4100 connected to the LPT1 port.  It would not print a test page, and the printer does not like in the reception of data.

  I then tried to install the (PCL6 and Postscript) universal print driver with similar lack of results.

  I tried uninstallinDeg and reinstall the drivers, but once again no joy.  Incidentally, although I'm going to Device Manager > printing queues and remove the drivers, when I set up an application like Word and select the Menu printing, many copies of drivers rest yet.  When I go to remove them using the printui/s/T2, it is said that they are currently in use and cannot be deleted.

  Yet once again, I repeat - it is not a hardware problem because everything worked well before Windows upgrade.  I just need to find a way to reinstall a driver who will speak to my printer.  It of frustrating because I was able to do that before, but may not know what I am doing wrong.

  Thanks in advance.

  Hello GaryLynn,

  You saw did a lot of things to try to solve this issue.

  However the USB to parallel isn't anHP officially supported connection type.

  in any case, what suggests I´d, is that you try this:

  • Unplug the hybrid cable that you use
  • Uninstall all copies of the printer and its duplicates.
  • Stop the print spooler by using the services on windows (type on cortana services.msc) locate print spooler and stop it
  • Go to run and coil type, look at the Printers folder and delete all the files that are there (if any)
  • Restart the spooler to print services.
  • Download and install this driver package
    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=FP-148007-1
  • Turn on your printer and connect the cable.

  After this exercise, check to see if windows 10 has managed to find the best driver to use your printer.
  If widows did not automatically find it, try the manual on add a Printer Wizard.

  If not reading as LPT1, check ports either USB00 ' # ' or a port DOT4, those who should be the ports to use.

  I hope this helps you get your printer going again.

  Thank you

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• Reinstall the V305W printer driver

  I have occasional problems with my printer V305W (communications), and it seems that one of the process printer has a memory leak (can't remember which - has been one of the DLDT process, I think).  Running Windows 7 - printer cable into USB port, no wi - fi used.  Initially, I used this one an old PC and downloaded the driver W7 when I got this PC (a Studio XPS).

  Would like to completely uninstall and reinstall the driver.  --

  Thank you.

  littlepeaks,

  First run delete print jobs to remove stuck print Job (s) of the queue. A print job blocked can cause many problems, even if you uninstall / reinstall a printer.

  Restart your computer.

  Make sure that the pritner is not plugged usb cable.

  Start, Panel, programs and features, your printer, uninstall

  Restart your computer

  Make sure that the printer has been deleted. Driver Manual printer removal

  Delete the program files (x 86)(x86) folder.

  Download the drivers for XP/Vista/Windows 7 64 bit and save them to your desktop.

  Install the drivers in the Vista SP2 compatibility mode , you will get a message, the printer is not connected, connect the printer at that time under tension.

  Don't forget viruses, programs and communications that will be the firewall.

  Rick

• Reduced with the universal print driver in Windows 7 manual duplex function

  On March 13, 2013, I downloaded the last PCL 6 Universal Printer driver for my Laserjet CP1518NI printer.   Manual duplex printing is now a mess!  In Windows XP, duplexing manual was available for Microsoft documents, but for them, it worked: if I chose to print on both sides, a pop-up window seem to remember to press 'OK' on the printer when it was time to print the second side. I could close this window without affecting the driver himself things correctly configured: he printed the pages first, in reverse order, collected if necessary and rotation so that when this side is complete, all I had to do was take pages on the output tray in put them directly in the input tray and then press OK on the printer, and the other next printed pages, in good order and the correct orientation.

  Here's the worst: when you print a double-sided Word file, I now get a BOX of DIALOGUE MICROSOFT WORD asks me to press "OK" in the dialog box, not on the printer, when you are ready to start printing the second side.  With an open dialog, I can't work with other Word files to the end of the first side printing.

  Is then the settings: apparently, I need to change the settings manually (not what I planned "Manual" Duplex would!) to learn how to print the first side (even pages) in reverse, reverse order / rotation, then the second side (odd pages) in normal order do not hit?  Do I have to change the settings before printing the second side?

  If I don't make all the settings myself, it just prints odd pages in the wrong direction and DISORDER.  If I do all the settings myself, which is exactly the pilot done for me, other than preventing me from working on other documents, the document while current is printing?

  I'm especially disappointed because the old driver worked very well.  I just updated the driver because of what turned out to be another problem.  Sigh.

  In reading the manual. on page 35, it describes how to enable the feature if you have not already:

  http://h10032.www1.HP.com/CTG/manual/c01070718.PDF

  According to the available information this process should not be performed by the driver. However, as I said above, almost all the settings you described I not know can be defined in MS Word. Back to history versions of the drivers, I see the same types of drivers that have been developed for Windows XP and the information I have shows that this function must not have changed.

  In addition, similarly, you should be able to allow printing of greys through the preferences of printer or the printer properties Advanced.

  I would like to know if this helps!

• error in the search for driver updates.

  I did a self diagnostic computer and he felt that the 6TO4 card has a 'configuration problem preventing it from properly start"," maybe he have good driver or may be affected by a hardware failure. "The Plug and Play ID for the device is 13" there was another driver that does not leave too, "Plug and Play #is ROOT\ * 6T04MP\0000» I am also including the information that I found on the driver #' s: pilot 6TO4 adapter c:\windows\system32\DRIVERS\tunnel.sys-driver version: 6.0.6000.16386 file version: 6.0.6001.1800(longhorn_rtm.080118-1840). I also found, "this device cannot start code 10.", "Windows finds drivers software for your device but encountered an error trying to install it.". He also told me that Sigmatel C-major also had information about this but I have not checked who yet because I found on a part of the device manager that all the updates had been installed. I went to Windows Update to make sure that all my options have been exhausted and found: "Windows could not search for new updates and error occurred when searching for new updates to your information. Error found Code 80070490. Windows Update has encountered an unknown error. ». He also told me to ask for help, so here I am, I have not install no matter what material I have downloaded a few security programs and what not, I'm too hip on Windows automatic updates I am too a novice not I don't (yet) know it as the computer and does not need, so I left it on automatic from the start. I have clkd on the diagnosis of the problem and the solution to go home, which is what you see above, I tried to clk on install updates, but the computer says all updates are installed, but the driver does not always work. I've had the computer for less than a year (my first one), but I had no real problems with it other than what I've caused by my own ignorance. If I had not run that diagnosis I wouldn't have known I had a problem with the driver, but it is obvious to me that if the computer will function even though all aspects of it should work. I only know about it for about a week, I had other things to do and I can do without this driver does not work, but I want it fixed too. So what do I do about it? Thank you for all that help you can provide.

  Hello dumdeedumdum,
   
  a. you have problems with the network for not being able to update the driver?

  b. What is the operating system installed on your computer?

  The best way to fix this would be to go to the computer or the device Manufacturers Web site' and download the updated driver.

  Do not scan the computer for the update of the driver.
   
  If all your devices and the network works well, you can skip this update. Microsoft has confirmed that it is a problem in the Microsoft products listed in the section "apply to".
   
  If you have a Vista-based computer, you can consult this article:
   
  http://support.Microsoft.com/kb/932520/en-us

  I hope that the information above helps you.
   
  Kind regards
  Manasa P - Microsoft technical support.

• While the research on how to correct an error in the observer of events, W32 tried merging a .reg file and got an error message saying could not access the registry, why?

  http://www.techexams.NET/blogs/jdmurray/synchronizing-the-time-on-Windows-XP-and-Vista-with-the-Internet/

  Hello, I'm under win xp pro svc pk 3, ie 8, x32bit.

  I received an error in the Event Viewer system for time synchronization W32. Help box said not to worry if it's a computer for the home user, but I'm tired of doing all the time, every day, so I tried to find a way to get rid of it. On bing, I found the above Web site and tried to merge the nist servers in my registry but I kept getting msg. :

  Impossible to import c:\doc and set\adm\dsktop\timeservers.reg: the specified file is not a registry script. You can only import binary registry files in the registry editor.

  the first msg not acceding, and I guess it was because I had the registry open at the same time. Anyway after that I couldn't import, just add the items in the registry manually.

  My question is, really, was performed correctly by the copy of the list of servers of time in the text, paste it into a file and you try to merge?

  Appreciate any assistance with this issue.

  Just for info:

  If you see a message similar to the following:

  Impossible to import c:\Documents and Settings\Jose\Desktop\enableit.reg: the specified file is not a registry script.
  You can only import binary registry files in the registry editor.

  That means either that your registry import file is missing the top line (or it's the wrong syntax):

  Windows Registry Editor Version 5.00

  or the file you are trying to import is not a valid registry import file.

• Vista Home Premium to ultimate problem, after reloading the system. Error message: the upgrade cannot be started. To upgrade, cancel Setup, and then choose to upgrade to a version of Windows...

  I recently had my computer HP reloaded due to hardware failure by Fry technicians.  They have reloaded it back to Home Premium, due to the fact that the initial charge.  I had already updated using a copy legal DVD Ultimate.  Now when I try to update it gives me the message above.  ALSO, when I check the GUI HP, it says my warranty expired 5/02 - OMG, I bought the computer 2/2007.  At they recharge an OLD picture or something?  HOW to solve this upgrade to Ultimate.  I don't want to throw away $150.

  You've never given the full error message.

  So, we have to guess that it is she:

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And your warranty with HP, Microsoft no issues.

  See you soon.

  Mick Murphy - Microsoft partner

• pass the char array to c ++ DLL and return even tank table

  Lectori Salutem,

  Here's the situation:

  IM TestStand, learning and to learn the basics, I want to do the following:

  Call a DLL (C++) in TestStand with an array of characters.

  The DLL should return the character table (or a pointer to the datalocation).

  This is the code in my DLL:

  //////////////////////////////////////////////////////////////////////////////

  Fixed it

  It turns out, I had to declare a string variable in TestStand.

  TestStand:

  declare Locals.Text (string)

  call the module DLL, arg1 = char [1024] = Locals.Text

  After the call to the DLL, Locals.Text becomes good morning

  Code Visual Studio DLLS:

• The cd/dvd driver has been damaged by a virus and then deleted. where can I find a new driver? Help!

  I have a Toshiba laptop with Windows XP

  I tried uninstalling the drive and reboot my computer it did not help.

  Without a new driver, my computer does not recognize the cd/dvd drive

  Please click on the link below and follow the steps outlined on the page, this will solve the problem:

  http://support.Microsoft.com/kb/314060

  MD MOEEN AJAZ KHAN - MCP, N +, A +.