Error 16 on Windows 10 Help!

Similar Questions

• age of empires III ERROR 1603 consult windows install help (msi.chm) or MSDM for more information

  I tried to install age of empire III on my computer windows 7, but I got an error until I had to even insert the key (ERROR 1603 consult windows help install (msi.chm) or MSDM for more information). I tried to enter in the files and run the setup.exe as an administrator, but it did not help.

  Anyone know why this happens and how to fix it?

  AoE3 is fully compatible with Win7 and I had no problem at the facility, but it may not be compatible with

  your graphics accelerator if it's an older 'integrated' graphics chip.

  (This should show a different kind of error message, but sometimes Windows spits a seemingly unrelated error message.)

  Try to post on AOE3 forums below. There may be someone who has had the problem with the installation of the game-

  Age of Empires III heaven Forum

  Age of Empires Forums - Forums

  This thread is related to Vista, but you can find something useful-

  Installation of Age of Empires III on a Vista based computer - Microsoft Answers

  .

• error-1603 Fatal error during installation__consult window installer help (msi.chm) or MSDN

  
  

  • during the installation of ORACLE 10 g on windows Vista Home Basic (32 bit).

  Fountain

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installerhttp://support.microsoft.com/kb/834484/en-us package

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem. __

  I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem.

  Hello jabeena, welcome.

  This section would apply in fact to the Windows Live programs, but we'll see what we can do to help out you.

  I recommend to try this first:

  1. disable any antivirus software or security, you have running on your computer. Looking for software to disable that contains a firewall.

  2. click on START
  3. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  4 type the following and press enter

  Regsvr32 softpub.dll wintrust.dll initpki.dll

  5. then type the following command and press enter

  netsh winsock reset

  6. restart your computer and see what happens.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• Can anyone help with 66A error when running Windows Update?

  Hello. I'm trying to update Windows with an important update, but every time I try it says update failed and gives me an error 66A. Any suggestions? Thank you.

  RobertGallo,

  See the MVP MowGreen response to a previous post, involving the error:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/error-code66a-installing-updates-please-help/b716e9f3-1a83-E011-9b4b-68b599b31bf5>

  05/22 / 1112:38: 48 pm

• cocodede80070422 Wiondows 7 udate same error appears every time you start. Impossible to verify new updates. Followed to fix windows nothing helped.

  errorcodede80070422 Wiondows 7 udate even appears each time you start. Impossible to verify new updates. Followed to fix windows nothing helped.

  Hi Colin,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you found error 80070422 when checking for Windows updates. This problem may occur if one or more of the following conditions are met:

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  If these steps do not help to solve the problem, you can proceed to the step below and check.

  Method 2

  Step by step instructions for the fixed number.
   
  (a) press the Windows key + X , and then select (Admin) command prompt.
     
  (b) on the prompt window open copy and paste commands (all at once)
   
  net stop wuauserv

  net stop cryptSvc
   
  net stop bits

  net stop msiserver

  Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution

  Ren C:\Windows\System32\catroot2 catroot2.old

  net start wuauserv

  net start cryptSvc

  net start bits

  net start msiserver

  (c) wait for the course to complete.
   
  (d) close the command prompt.

  Now, try to reinstall Windows updates and check if it helps.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Fatal error 1603. Windows help install (msi.chm)

  I know this is an old thread, but now with windows 7, any change?

  Separated from -.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/fatal-error-1603-Windows-Installer-Help-msichm/c5809658-cc5d-4546-b4dd-06d42d13c0da

  ColleenSchake,

  Cancel the registration and re - register the Windows Installer and check if it helps.

  1. Click Start, run, type "MSIEXEC /Unregister." without the quotes and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
  2. Click Start, run, type "MSIEXEC/REGSERVER" without the quotes and then click OK. After you run this command, the operation is complete.
  3. Try to install the program and check if the problem persists.

  Arthur Xie has a good suggestion of the error: fatal error during installation-1603 screw it to TechNet Windows 7 Pro forums.

  Keep us informed.

• When I download itunes on my pc, I get an error of analysis package, any help?

  "When I download itunes on my pc I get a parse error in the package, any help?

  Hello xlAdrenaline,

  Thank you for using communities of Apple Support.

  If I understand your message that you receive a packet parse error when you try to install iTunes on your Windows PC. The following article has some great not to help solve this type of problem:

  If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

  Best regards

• ATI error and no windows - Satellite Pro A60

  Hello

  When I start my computer, I get a blue error screen c0000415
  A quick google reveals that this is one of these: http://support.microsoft.com/kb/832324

  "So what are you bothering? I hear you cry - the problem I have is, in getting this error of the other (also the ATI card based) I stuck my red disc in and erased everything - including the windows... and CFLA error occurs before windows installs and SafeMode (-that worked perfectly before) does not work because windows is not installed!

  Oh the fun.

  "I think it's a hardware error" - Yes so don't I... However, before the reinstall and get it back, I could work to the computer in safe mode and videos played very well with the resolution and full color. Am I missing the point if I think a video work is an indicator of a working video card?

  I admit that I'm perplexed indeed. I'll try to dig up an old Windows 98 drive, but I don't know how much this will help, because the only copy of XP I have is on the recovery disk... [Return to step 1]

  Any suggestions much appreciated - thanks in advance...

  [it's a satellite pro A60 w / 256 +?] RAM, processor celeron 2.8 Ghz, ATI Mobility Radeon 7000 etc...]

  Hello

  As suggested in document of Microsoft this problem can occur if an ATI Radeon 7200 graphics card has been installed on your computer and the driver that is supplied with this adapter may not work correctly with Windows XP.
  The installation of SP2 should help.

  This statement of Ms. says it all! It of not a hardware problem but it is a compatibility issue with Windows XP (without SP2) and the driver radeon ATI 7200.

  You should try to get an original CD of Windows XP with or without SP2.
  The software callednLiteallows you to create a Windows clean boot CD and add the patches MS and service packs for this CD.

  Then, you can try to boot this CD and after installing the OS, you need to update or change the graphics driver!

• My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  Your help would be greatly appreciated

  Thank you

  original title: network

  Hello GerryBenjamin,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• error code 80070005 Windows Update running

  Original title: error code 80070005.

  Last Friday, my laptop had a message saying Vista had stopped working properly and I had to install service pack 1 (even if this had been done just after buying 18 months ago), I did the install and now all THE updates have been removed from the computer and he said: he can't do windows updates the error code 80070005. can anyone help with this. Thank you

  Hey gordont,

  Error code 80070005 means generally that you're not quite allowed to install updates. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates.

  To resolve the problem follow the steps that are listed in the methods below in the order listed, starting with method 1.

  Method 1:

  Log the computer as an administrator or as a user with administrative rights.

  Method 2:

  One of the most common causes of this error code (access denied) is the Anti Virus and Anti Spyware software running on the computer. You can try to disable them, and then try the updates again.

  Method 3:

  Try to reset your default security settings.

  Reference:

  How to restore the security settings the default settings?

  http://support.Microsoft.com/kb/313222

  Method 4:

  Reset Windows Update components.

  See:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  This should be it.

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• All 32-bit applications crash with error 0xc000005 after windows Server 2008 R2 backup

  Hello world...

  I am in a big mess... and really need help!

  I did last night a Backup windows... but one of my users were connected to the server works with applications...

  and this morning No 32 no bits applications... same installer...
  the 64-bit application works very well...

  Others or generating an error 0xc000005 and stop...
  failing Ole32.dll module...

  And I'm sure that the backup is reliable, even if the backup of windows said it was successful...

  I tried to restore only the apps files... but it seems more complicated than that...

  If anyone has an idea...

  Hi, Emeric,.

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that 32-bit applications crash with an 0xc000005 error code in Windows Server 2008.

  As the question more appropriate forums Technet, write the topic in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  Using the windows-related issues feel free to post on Microsoft Community.

• What is error C00D1197 in windows media player when you try to burn a CD.?

  What is error C00D1197 in windows media player when you try to burn a CD.?

  Hello

  These should help:

  WMP - C00D1197
  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Windows Media Player Error Message help
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1197&ContextId=71&OriginalID=80070002

  Also check this KB which could apply to other versions of WMP
  http://support.Microsoft.com/kb/834483

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">