Error 1706: Windows install continue trying to install.

Similar Questions

• ERROR 1706 - Windows install?

  Box is constantly popping up and I can't get rid of it.

  "Windows Installer" box, preparation for installation error 1706 - I click Cancel and another box appears said UNLOAD - the component you are trying to use is on a CD ROM or other removable disk that is not available. Insert the disc to "Unload" and click OK. Valid error 1706 - no source is found for the unloading of the product. Windows Installer cannot continue.

  Not sure where this came from but I could use some advice/help to get rid of it. Please keep in mind that I'm not a PC teckie... lol, talk loud and slow. Thanks for any help you can offer me.

  MS Office - Windows Installer error 1706

  See: Kelly Korner:
  Line 171, on the right side
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Error 1601 Windows install is not accessible

  I am trying to install Turbo tax and get the error message: Windows install is not accessible.  Installation cannot continue because the Windows Installer is accessible.  Error code 1601.

  I tried the solutions available on the support.microsoft.com site but nothing works.
  

  Thank you. Method 1 fixed it for me.

• The computer restarted unexpectedly or encountered an unexpected error. Windows cannot continue.

  My netbook is out of warranty, it won't start.  I bought what I believe with installed and later put vista upgraded to Windows 7.  He worked for long time but now it goes into a loop to tell me ' the computer restarted unexpectedly or encountered an unexpected error. "  Windows cannot continue.  To install Windows click ok to restart the computer ang, then run the Setup again.  I am not install but it keeps on telling me this.

  Original title: Aspire one Windows 7

  Hello

  You can try the methods on this link: https://support.microsoft.com/en-us/kb/2622803. Hope you still have the back upward with you.

  Keep us on the loop, so once this aid.

  Kind regards

  Angelo bar

• Error 1706: (cannot install KB2416447)

  Original title: error NPD1-1sp1-KB2416447 - x 86

  I tried to heal by installing the following

  Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008

  but I'm told

  The system you are trying to use is on a network unavailable resource. Find the folder containing the installation package 'netfx.msi '.

  Error 1706: valid no source is found for the Microsoft.NET Framework 1.1 product.  The Windows Installer cannot continue.

  and I can't find anything on netfx.msi anywhere on my computer.

  How can I fix this very annoying problem?

  Hi Brock64,

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can access the link below and follow the steps described in the article and try to uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer and try to install the update.

  http://support.Microsoft.com/kb/923100

  You can also read the following article and check if it helps:

  http://support.Microsoft.com/kb/2416447

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Sync blackBerry Smartphones DTM 6.0 error 2753 and errors of windows install, please help

  I tried to install and uninstall more than 5 times with the same mistakes

  This is what happens when I install it

  When I start to install on Win7 64 bit 6 DTM, first message said.
  Windows install, waiting for Microsoft Visual C++ 2008 Redistributable, it says failed to install even if its already installed tried to install it, but then, that's why I cancel this port on the installation ending.
  Now when I run the application and click on save, I get a box saying the error message said: "the component you are trying to use is on a network unavailable resource."   It looks for the file Apploader.msi in the directory C:\Documents and Settings\user\Application is in Motion\BlackBerry\... I tried searching Apploader.msi, but there isn't, so I have to cancel, if I continue to by pressing cancel what he finally back up. but I can't sync I get an error message whenever I try to configure the synchronization configuration parameter. error 2753 than Nokia MsOutlookApiProxy64.exe D9D285E5_C9F0_4101_A12C_555AE1C1593F is not marked for installation

  I tried searching the Web, but no one can help you, as you say it if I can't sync.
  Please if anyone can help with this problem, I would consider their genius

  I've manged to remove BB 6 and the mistake of silverlight went, but when I try to install bb 601_b021

  I always get the error message.

  "error 2753 than Nokia MsOutlookApiProxy64.exe D9D285E5_C9F0_4101_A12C_555AE1C1593F is not marked for installation"

  and the application installs any ideas how to remove this error please.

• Error "Change Windows settings" when trying to access the installed program Pastel 11

  Original title: can not enter in the program that I installed

  I installed the version 11 of pastel and all succeeded but now I'm trying to enter pastel it is said to change windows settings. How do I do that?

  Try to reinstall by using compatibility mode.

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Software:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

  Run in Windows XP Mode requires:

  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC

  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• Windows Vista continues trying to install the same 5 updates

  See above

  I tried to install that individually, it seems to work then all of a sudden, it shows all the 5 installation again once I also tried to install with anti virus disabled, but it makes no difference

  Very well. Welcome & thank you for your comments.

• Errors of Windows install

  I tried to install an add-on from Abacus to Flight Simulator X (Carrier Strike Force) and I get the following error:
  Error 1721.  There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.

  I contacted the support of the Abacus, and they said it was a problem with MSI in Windows 7.

  On the other modules FSX of Abacus (V22 Osprey and 2 fighter pilot), I got a different error:
  Error 1925.  You don't have sufficient privileges to complete this installation for all users of the machine.

  For some reason, this installation is not the windows trigger mechanism to trigger my privileges as administrator rights.

  Two of these facilities worked without problems on Vista (32 bit).  I am currently under the 64 bit version of Windows 7.

  Are there questions/patches known to MSI?

  Hello JMessina,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Flight Simulator X and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Thank you

  Input jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1720 windows install

  I'm having the same problem as Mama bear, someone not healing, Ive tried everything. Trying to install a MiFi 2200.I trying to install VZAccess Manager, and I get the Error 1720. I can't remove the generic drivers my mobile... Help

  Hi Dgriff88,

  Step 1:

  To get rid of this error, I suggest you to install the latest version of Windows Installer, which you can download from the link:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2:
   
  Start the Windows Installer service.
   
  1. Click Start, type Services.msc and press [ENTER]

  2. double-click on Windows Installer.

  3. set the Windows Installer to Manual startup type.

  4. Click Start to start the service. Note the error message, if any.

  5. click on OK.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• get an error message Windows install does not. What can I do?

  Whenever I try to download a game or itunes, I get the Windows error message install does not. I don't know what someone can help me.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the Windows Installer service
  1. Click Start, type Services.msc and press {ENTER}
  2. double-click on Windows Installer
  3. set the Windows Installer to Manual startup type
  4. Click Start to start the service. Note the error message, if any.
  5. click on OK.
   
  Method 2: Unregister and re-register Windows Installer to follow the steps below.
   
  1. click on start, run, type MSIEXEC /Unregister. and then click OK. Even if you
  This correctly, it may seem that nothing is happening.
  2. click on start, run, type MSIEXEC/REGSERVER, and then click OK. Even if you
  This correctly, it may seem that nothing happens, or you can briefly see an hourglass.
  After you run this command, the operation is complete.
  3. try your application based on Windows Installer again.
   
  Method 3: Try the SFC scan on the computer:

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Error 80246008 Windows install. Com + Event.

  Original title: Com + Event

  Windows Installer won't work gave me an error 80246008 and then received the error 1068 for FORESTS. Events com + starts and stops. How do I get this stay started? RPC and DCOM Server process Launcher are correctly configured. Many services also have an error message interface class not registered. Any suggestion would be appreciated.

  Norton Internet Security, Norton Security Scan and Symantec Endpoint Protection have been previously installed and have been removed

  1 has your Norton Internet Security or Symantec Endpoint subscriptions already expired (or had you stop working for the company that has provided Symantec Endpoint) at the time where you've bought & installed subsequently CyberDefender?

  2. don't buy you & install the suite CyberDefender before or after this ' event Com +"problem started?".

  3 have you EVER run the Norton removal tool?

  ==================================

  How to reset the Windows Update components?
  => KB971058 access through Internet Explorer (32-bit) only; Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 1719 Windows install Vista 64-bit

  Help. Whenever I try to install a program I downloaded about 80% through the installation, I get an error message stating "Error 1719." Windows service install are not accessible. Contact your support to verufy he is properly registered and activated pewrsonnel".  Then the program closes.  How can I fix it?

  Thank you

  Tony

  Sorry I missed the answer to the origin. Please use the below to send a product cleaning and more easy to read the newspaper.

  Right after the sections of the error and they often repeat so only post each section once.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228 Rob - bicycle - Mark Twain said it is good.

• Having problems with all the updates - error 1601 - windows install failed - what should I do?

  All of the updates fail - net framework for microsoft office updates.  All of them refer to the windows installer.  If it is corrupted, how do I fix.  At the moment I'm hiding updates, so that they are not repeatedly appear in my taskbar.  I had this problem since May.

  ... I had this problem since May.

  Vista Service Pack 2 (SP2) is installed?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Unexplained computer behavior may be caused by deceptive software
  http://support.Microsoft.com/kb/827315

  There is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft is sponsoring free, online (third) for issues: http://supportservices.microsoft.com/support/services/virus_malware_removal

• I receive the error message "windows install does not.

  I am running Vista SP2. I tried cleaning disc, I did a clean boot and found no program causing the problem. I can't find a new version of Installer for Vista SP2. I ran SFC and he responds with files with unable to correct mistakes. I tried to run my installation of windows repair disc. Now, I'm ready to pull my hair. Will someone please help?

  Hello

  Follow these steps and check if they help.

  Step 1:

  Test the issue in a new user account.

  See also: http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile

  Step 2:

  If the problem occurred recently, try System Restore.