Error 1720 when installing software for usb modem

Similar Questions

• Error 1406 when installing software Karl on windows 7

  Hello

  my system displays error 1406 when installing software Karl.

  Pls let me know if theres a problem with the system or the software

  and the solution to this problem as soon as possible

  thanking you...

  Guy srslly? Just go open Regedit.
  Hold the windows key + R, then type regedit
  then goto HKEY_LOCAL_MACHINE > SOFTWARE >
  and right clikc on Karl and then delete.
  Delete registry filed files and then reinstall kkkkk. :), hope it works.

• Satellite Pro L300 - cannot install software for USB 3.0 Expresscard

  I try to install AKE USB 3.0 expresscard to a Toshiba L300 Pro running Windows 7. The laptop recognises the ExpressCard but the software does not correctly install if the unit will not operate.

  Tried the drivers NEC & fresco provided with the unit and also tried other drivers for AKE downloaded fron internet but still no joy.

  Has anyone ever loaded into the software for a USB3.0 expresscard successfully? The laptop will have USB 3.0?

  Any help would be appreciated.

  If the software doesn't install correctly, try to contact the manufacturer of the card and ask for help.

• Error message when connecting with wireless USB modem

  Dear Sir/Madam,

  I use the HP laptop with Windows vista operating system. I'm also using the USB wireless modem. But now, I had problem connecting with usb modem. I get ((erreur (6): could not get the string) message connecting with.) Kindly help me to solve the problem.

  Thank you
  Kind regards
  D.Yokesh

  Hi D.Yokesh,

  1. did you of recent changes on the system?

  If it is a recent issue, then you can try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Get the 8007371B error code when installing update for Windows Mail Junk E-mail Filter [December 2009] (KB905866) _

  When I run Windows Update it shows an important update available. "Update for Windows Mail Junk e-mail filter [December 2009] (KB905866).
  When I try to install the update, it downloads, create a restore point and starts to install the update.  The green bar goes all the way to the right and then I get a "failed" message with a 8007371B unknown error code.
  KB905866 appears in the list of installed programs.  I tried to uninstall and rerun the update of Windows, but he continues to go through the same sequence of activities having the same error message for result.

  Is there a solution?

  Last successful update was (November 2009) 11/11/2009
  First update failed (December 2009) on 09/12/2009

  SP2 has been installed.

  SP2 has been installed 03/07/2009

  Update tool for Windows Vista... (KB947821) has not been installed.

  I'm currently running AT & T Internet security from McAfee.

  This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

  I'm currently running AT & T Internet security from McAfee.

  This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now, make this McAfee "triple fix": http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  Test.

  PS: Please don't substantially edit a message from you after that someone has replied to it or a post later of yours in the same thread. THX

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I protect he'S catalogs when installing software for SSD drive & 2nd data disc

  I know that this has been answered a thousand times... but when I search, I find that a 1 000 answers and none relate exactly to my question...

  I have a laptop

  I have a technician install a 1 TB Solid State Drive adjacent to the existing "spin drive" provided with the laptop (1 TB)

  I'm having the existing drive spin "wiped clean" and reformatted

  I him have to put all THE SOFTWARE, including 10 Windows on the SSD drive

  CC - Lightroom and Adobe Photoshop will operate the SSD

  My 'current' workflow about 6 weeks of photography is retained on the SSD for faster treatment

  These last about 6 to 8 months of photography will be kept on the existing "spin drive" came with the computer.

  Previous work will be kept on a 3 TB external storage drive

  I'm dragging 633 GB of photos of my 'drive spin' on my drive external hard to ensure the guard with the upgrade is performed.

  ...........................

  And here is my fight...  I don't know enough about Adobe CC to make sure that I have all my files protect.       I know that I have several catalogs, but the drop-down list on the menu (at the signing in LR) shows about 8-10 choice and I'm only using 4 or 5!

  How Lightroom find my Photos after I drag them back to the newly - reformatted "spin drive?   I know how to find a lost file manually... So should I do hundreds of records, I have?

  Where my LR catalog folder will be stored?   Right now it is in my pictures folder.   It will be there if the Adobe program resides in the SSD?

  I have more questions... but that's enough for now...

  Thank you

  John

  First of all, your CPU is old and slow by today's standards, and clearly a faster CPU would do a faster job of making these backups.

  In the second place, it is a very large catalog file, 9.2 GB. (Are you sure that you watched the .lrcat file and not the amount of space occupied by the photos?) Yes, you are supposed to use Windows Explorer to find the size of the. LRCAT file. For comparison, my catalog with almost 30 000 images is only 1.75 GB. All the brushing, you did apparently exploded the size of your catalog.

  You can reduce the size of the catalog file by clearing the history on each photo (this leaves the changes in place but you will be able to go back in history and see the sequence of steps that you used). I'm not aware of a way to do bulk on each photo, but in the back of my mind, I think that this has been discussed in this forum and you might want to search for.

  The last thing you might consider of doing backups until you go to sleep. Just leave Lightroom open until you go to bed, then close and let the process of backup with happiness.

  So, that's all that I can think of to make this faster process right now (other that to split the catalog file, which has many disadvantages). Faster processor, remove the story and let Lightroom its backups when you sleep.

• Could not open key: UNKNOWN\Components\ [LongStringOfLettersAndNumbers]------[rs LongStringOfLettersAndNumbe] "error messages when installing iTunes for Windows.

  I get this message every time I try to install iTunes:

  Could not open key:

  UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8

  \b25099274a207264182f8181add555d0.

  Check that you have sufficient access to that key or contact your support team.

  I tried the suggestions on this post (https://discussions.apple.com/docs/DOC-3581) three times already, and it didn't work.

  Any other suggestions would be helpful.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Try to run the installer as administrator. The Microsoft program install and uninstall utilities mentioned in note 1 below the second box.

  TT2

• When installing updates for Vista I get the error code 80070490

  Whenever the automatic installation updated it gets error 80070490 and he falils to install all updates

  On what edition of Windows and what level of Service Pack, please?

  (1) you receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  "This problem can occur if there is corruption in component maintenance (EC) manifest."

  (a) run sfc/scannow from a command prompt
  http://support.Microsoft.com/kb/936212

  If the above does not resolve the error...

  (b) download, Saveand then run the update system (or CheckSUR) tool - http://support.microsoft.com/kb/947821

  (c) no joy? To resolve this problem, you can try to perform a repair of Windows Vista or Windows 7 installation
  http://blog.taragana.com/index.php/archive/how-to-do-a-repair-install-to-fix-Windows-7/

  Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the Service Packs and updates that are not included on the installation DVD.

  For Advanced users.

  (2) how to overcome error 0 x 80070490 when installing updates in Windows
  Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Expert MowGreen Windows IT Pro - consumer safety

• Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Hello mnaveen.kumar,

  Search the registry to see if this key was created. Sometimes, the installation program does not have permission to this key.

  HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.

  You can try to manually create the key to see if this will help.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error 1935 when installing scan snap xi500

  Keep receiving error message when you try to install the scan snap xi500.  Seven hours on the Helpdesk with Fujitsu does not.  Anyone have this problem?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you receive an error message when installing Scan Snap xi500 and I'll be happy to answer your query. Let me ask you;

  • What is the brand and model of the computer?
  • You are able to install any other application?
  • What security software is installed on the computer?
  • Are you logged on to the computer with administrator rights?
  • Your computer is connected to the domain?
  • Exactly how you try to download?

  There could be several reasons for not being able to install Scan Snap xi500. We will try to help you solve the problem.

  We will ensure:

  (i) you are connected to the computer with administrator rights

  (ii) try to download any other application to ensure that no problem with installation service in Windows

  According to the information provided by Fujitsu in the link of the questionnaire below, it seems that you are supported to fill out an application form in order to complete the installation process.

  Please refer to: Software Downloads: ScanSnap iX500

  Also, you can run the Microsoft Fixit who can automatically fix problems that block program installation or removal because of corrupted registry keys.

  Click to start Fixit.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Hello

  I suggest to see the link and install the drivers and check.

  http://www3.jvckenwood.com/English/download/index.html

  I also suggest you contact the manufacture of the product and check.

  http://www3.jvckenwood.com/English/support/index.html

• Locked up/hang up when you use a USB modem.

  Hi all, these days I have a problem with my laptop.

  When I connect a USB modem to my laptop and surfing the internet for a while, suddenly my laptopcomputer became unusable. I tried to shut it down via power button, but instead of 'sleep', he still appeared on the screen of my last and cannot be used at all. Then, as the second best, I removed the battery charger and the power then restart.

  I tried some actions: pass my firewall to Windows Firewall, using my modem with charger unplugged, scanned my laptop for malware (my laptop has been infected before, but now is healed), register of defragting and so on, but none succeeded.

  For information, here are the products that I use:
  1 Dell Inspiron with Core 2 Duo, 2 GB of RAM and nVidia GeForce 9300 M GS 512 MB
  2 HSDPA USB mOdem Huawei E226
  3 PC Tools Firewall more
  4 Auslogics and Registry Clean Expert (register defragtors)
  5. IT IS IE 8
  6. AVG 8.5 and Ad Aware (the latter not having active Ad-Watch)

  If anyone knows how to do this topic so I'm glad to hear it.
  Thank you.

  EDIT: this situation persists once a day I use my modem daily.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - device - Modems Double click top - tab of the driver manager - click on update drivers (this will
  likely to do anything that MS is far behind the certification of drivers) - then right click on uninstall

  Continue:

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I connect my usb modem to my pc and it is held automatically loading my pc restarts

  When I connect my usb modem to my pc and it is held automatically loading my pc restarts

  Hello

  Please check the USB modem to a different USB port or another system.

  If it works fine in another port or another system, it may be the problem with USB port.
  If you face the same problem. then the problem is with a USB modem,
  Please check with the manufacturer of your USB modem.
  Kind regards
  Chauvet J.

• can you install software for vista 32 bit on a 64-bit prossesor

  You can install software for windows vista 32 bit on a 64 bit system

  Source of confused, between the header and the body of the post, as you ask your question.

  Vista 32 bit OS will work on a computer that is capable of with Vista 64-bit OS.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can install most 32-bit software on a Vista 64-bit operating system, with the notable exception being the anti-virus programs.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Most of the programs designed for the 32-bit version of Windows works on 64-bit Windows version. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit version of Windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  Use the link above to check the compatibility of Vista 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner