Error 2100 with disk SSD Sandisk on Thinkpad X61s

Similar Questions

• Speed XP Virtual Machine with disk SSD/Velociraptor/7200 RPM EVEN!

  Hi all -

  Recently I decided that I was tired of waiting for one of my XP VM to boot. He took ~6.5 minutes, at the time where all services started and everything and I've been to a logon screen. I have a Velociraptor that my (clean install of Windows 7 x 64 RC1) operating system was turned on, so I bought an SSD, installed and copied my my 7200 RPM WD Caviar Black VMs to the SSD. Naturally, I was not impressed by the results of the tests AT ALL. I saw the following:

  • Operating system loaded on Velociraptor, VM XP on WD Caviar= 6.5 minutes to start the VM/login prompt to appear

  • Operating system loaded on Velociraptor, VM on SSD= 6.25 minutes to start the VM/login prompt to appear

  • Operating system loaded on SSD, VM on Velociraptor= 6.5 minutes to start the VM/login prompt to appear

  This seems really strange, since all the posts that I read is the drive faster, faster operates the VMWare VM / fastest. Throw into the mix that the portable original that this virtual machine has been converted will start in about 3.25 minutes (IBM T42, Celeron CPU @ 1.70 GHz, 2 GB RAM) and something seems really wrong...

  I had markers with crystal drive and I'm getting great flow on the SSD; readings are really quick, / writing sucks, as expected.  I also notice that my boot time host o/s, Office, race etc. faster.  I really expected increases in day/night performance here on my virtual machine, not more of the same for disk SSD $200...

  By the way, I have dedicated 2 GB of RAM to this VM XP and have only run with a single processor.  And before anyone asks: no, I can not improved this virtual machine to Vista/Windows 7, due to restrictions on IT.

  So, my questions for the group here are:

  1. Is there something special I need to do to make the more attentive virtual machine?  The main thing that I hear, it is to throw as much RAM and disk speed, you can him... obviously, I did... and no, dedicate 3 GB, 4 GB of RAM doesn't help, either. I already tried...

  2. My VM has a single disk (~ 42GB).  Would I have noticed no improvement in speed, dividing the disk (in pieces of 2GB)?

  3. I see the best performance by using a dedicated hard drive controller (Vs the edge)?

  4. If I see the best performance with a hard disk controller dedicated, he's more intelligent RAID 0 two Velociraptors or two SSD performance for VMWare?

  I am willing to spend money on a controller or another SSD or Velociraptor (or a controller and another drive), I don't want to feel like I am wasting time and $$$ trying to achieve a performance that cannot be established in VMWare.

  My features of the platform are:

  • Operating systems: Windows 7 x 64 RC1 (fresh installs for all tests)

  • CPU: C2D E6750-2.67 GHz

  • RAM: 8 GB RAM

  • Motherboard: Gigabyte P35-DS3L (Southbridge: ICH9)

  • Storage:

  • Corsair Extreme Series CMFSSD - 1 64 64 GB 2.5 "SATA II MLC (contains the OS)

  • Western Digital Velociraptor 150 GB (contains virtual machines)

  • Western Digital Caviar Black 1.0 TB (General store)

  Thank you, in advance, for all your comments.

  @ noirfan1:

  Re: #1: OK, it used to take me more than an hour to perform a scan on demand with the vmdk files stored on a 1 TB western digital 7200 RPM drive.  When I moved to an SSD (60 GB Supertalent) vmdk files time has decreased to the point where the total scan time less than 8 minutes.

  Re: #2: OK, I think that there may be a service startup time, driver, or a process that can be hung up the system which is not related to disk IO.

  Re: #3: If you use the same .vm * exact files on two different systems and see a big difference in time of start, check and confirm that the virtual machine configuration settings are identical.  An example would be to have the virtual CD-ROM connected to an ISO on a network share and have the virtual CD-ROM disconnected from each other.

  A good test in the strict sense for the disk performance is to create clean XP install on the raptor and the DSS, and compare boot times in this way.  I'm not too familiar with the SSD Corsair you mention, but it should be faster.  Beware if it is based on the Jmicron controller (they are known to have huge problems with the random read performance) instead of a controller Indilinx Barefoot or Intel.

  Another test of the performance of the hard drive could run iometer inside each virtual machine to check the raw performance of io.  HD tune is another tool, that you can use for an easier test.

  I hope this helps.

• Update XP, Vista and win7 PC with disk ssd

  Hello

  I have 3 computers with XP, Vista and Win7.

  I wonder if computers laptops XP and Vista (sata) will be able to get the most out of the SSD HDD?
  The sine qua non of not losing a lot of performance, is that the bios ahci mode available for hard disk?
  Is there something else?
  Some older computers, laptops and desktops may not use a SSD HDD?

  I have an external SATA enclosure for a disk hard 2.5 "regular who was not particularly to adapt to an SSD HDD. It fit? I'm wanting to copy the contents of all of the hard drive to the hard drives(xp,vista,win7) on the new discs, including the hidden partition which has the OS on it with something like Norton ghost or acronis true image software. Are there suggestions which we use, and which cable (what is a sata to usb cable?) do I need for the migration if I use a laptop computer to copy these disks?

  Does anyone have any suggestions of what SSD to use? I'm looking for a 120gig SATA 3 with faster speeds.

  Thanks in advance

  Hello

  3 SSD have more fast read and write times when they are installed in PCs that use the latest SATA 3 interface. You may be able to search online by using your favorite search engine to know the different manufacturers.

  SATA cables would be also faster to transfer the data.

  See: http://windows.microsoft.com/en-US/windows7/Install-or-remove-a-hard-disk-drive

• 0x8E5E0247 of error after installing a SSD Crucial of 512G on my HP Pavilion desktop computer

  I get this error even after installing a 512G SSD-Crucial in my HP Pavilion desktop computer.  I cloned it from my previous hard drive using Acronis 2014 edition.  I don't know that they are connected.  I called Crucial and asked if there were drivers more recent etc and the answer was not.  Any thoughts?

  Original title: error 0x8E5E0247

  Hey, Cliff,

  Thank you for visiting Microsoft Community.

  I understand that you get an error code with your SSD.

  Sorry to hear about the inconvenience caused. Do not worry, we are here to help.

  One of our community member had the same type of program where Glenn24 responded on 25 January 2011.
  Please refer to this and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-Troubleshooter-error-0x8e5e0247/3d46f7a4-4433-41C8-aba6-e42a3532614e

  Additional information:

  If you have an Intel based, visit the Web site below and it will automatically scan your computer and give you updated information on the pilots.

  http://www.Intel.com/p/en_US/support/detect/

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• SSD T410s error 2100 HDD0

  several new portable t410s received last week, some systems turn off randomly and reboot with

  Error

  2100: HDD0 initialization error (hard drive) (1)

  Press ESC to continue

  almost like disk is simply disconnect...

  We have tried to update the firmware SSD intel x 18 with later from intel (Yes disabled AHCI) and can't because of the BIOS/mobo as such http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410S-unable-to-update-firmware-of-the-Inte...

  waiting for lenovo to release an official update

  anyone else getting error 2100?

  THX,

  -trekuhl

  problem seems to be sata/ahci driver. the default windows (to the right WHQL FTW?)

  upgrade to the latest intel (9.6.xx) and no more blue screens, BUT then he would go to the black screen and keep running and not to answer. use the one off lenovo site which was a 9.5.7.1002 and works great... averted crisis.

  very strange intel last let's talk issues, which makes me wonder what lenovo has done on the system that could cause the problem. a chipset intel Intel SSD so intel drivers should work great...

• Help with my SSD Setup/Scratch/Previews/Disk Cache

  I read the generic installation thread. I had another post regularly in the forums regarding the purchase of the SSD.

  I still have some questions, and which relates to the material, so I put it here.

  My pcpartspicker installation and construction:Intel Core i7 - 4790 K, MSI GeForce GTX 970, NZXT Phantom 530 (red) - construction system - PCPartPicker

  
  Recently upgrade my SSD configuration. So I still have to check in my projects I've been working on and put the media files and all

  for the new SSD.

  My thought on the hard drive setup.

  (C) Samsung 850 EVO 250 GB SSD (OS and programs)

  (E :) WD Black 1 TB for storage

  (F) SSD 480 GB Sandisk Ultra II for Media Files folder of the project

  (G),SSD 480 GB Sandisk Ultra II for the Cache previews

  
  

  Here is an image showing the readers:
  

  

  Firstly a bit of my workflow.

  I do my correction of color and most of the effects in the first.
  I work mainly in first with dynamic link to 2015 after effects CC (audio mix in Audition with video export not dynamic link).

  I work in After Effects alone is that for some intensive 3D editing, intros, outros.

  When in Premiere Pro... I do the dynamic link to After Effects to replace After Effects Composition and to render in Place (can always come back to make changes later).

  I do all my titles in After Effects with dynamic link as well. Yet once, make and replace it as always.

  If it's something intense, I work in After Effects only and import that into first separately.

  My projects are not huge. Never really more than 50 GB. Usually short videos upward at 10 minutes.

  Now, I read in the manual on some of what I'm about to ask, but some is still not clear.

  Here are some shots:

  First my global memory configuration (upgraded to 32 GB of RAM soon)

  

  First screenshots and issues: Please see at the beginning of this thread and the structure of the unit.

  It is where I have my Cache of media and data base: G:\ which is a Sandisk Ultra II SSD 480 GB
  

  Now, my question is about the capture video and Audio captured. Type to get what it is...

  but it also refers to all of my media files? Where are my media files and project files?

  Don't forget, I have not checked my projects, I work on and moved in the new SSD.
  My project files and media are going to go on the F: drive, which is a card Sandisk Ultra II 480 GB SSD.

  Future projects will make their way.
  As you can see I put my video Previews and Audio previews the G: drive, which is the other

  SSD 480 GB SanDisk Ultra II.

  Auto backup project, I guess that would be fine in the future as well as project.

  

  Now After Effects: Should which drive I set my Cache Disk too given my configuration?

  

  Last part of this equation is export of Final project: when I export final, I manually select where I want. Which

  Drive would give me the faster export? Size of exports nor more than 2 GB of the file. (mainly goes on youtube)

  So I know that it is a wall of text and images, just try to give all the information.
  If anyone has any input of the best configuration, it would be great.

  I have two SSD Sandisk Plus 120 GB drives, with a slow writing of about 180 MB/s speed
  Those that would be used in RAID0 of my Sandisk Ultra II died.

  I was the same person who responded to your other post. I'll add my 2cents, but I hope others will come along to give their advice as well.

  Another option of disk configuration, if your motherboard allows, is to make 2 raids.

  (C) Samsung 850 EVO 250 GB SSD (OS and programs)

  (D) DVD player

  (D) 2xSandisk more SSD 120 GB raid-0 (total 240 gb) (cache and previews)

  (E :)) 2xSandisk Ultra II 480 GB raid-0 (960 GB total) (media and projects))

  (F) external usb case or dock to hold the WD Black 1 TB (backups and storage)

  There should always be a backup of the project and the media on any drive, but raid 0 can add more risk, it must be ensured that these backups are fact/available.

  any project car record must be recorded in a different drive ongoing projects are being recorded. This is part of the idea of auto-enregistre is an automatic backup. its also been recommended to save the project as a copy, manually to another drive at least once a day, that auto-enregistre may fail or become corrupted (bugs).

  After that the effects disk cache setting should go to the cache drive, that we call cache & previews. disk cache should be used in dynamic link when you render and replace in the first, after that, if you need space, you can empty the cache in AE to release this space.

  the parameter memory in first: I don't think it means a lot, but I've seen people have to experiment only when getting poor performance. Looks like some had to put to memory or half of what was the total system, for first to work well. You may notice a difference in changing its settings.

  the captured video and audio areas captured that I think are only for new media captured/recorded directly in the first. I don't think that it applies to as rendered files and replace the video or audio.

  exports, your processor is only 4 core and depending on the amount of work the cpu must do during export, the performance of readers may not have any effect. If its export quickly, you can export to any drive other than the drive media/projects. If you're looking at the windows task manager and see cpu at 50-75% and think it's a disk it slows down, chances are his righteous inefficiencies in the low usage of the processor responsible for adobe software.

• ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?

  Hey, Lenovo,.

  I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?

  Kind regards

  Mikael

  
  

• Error 332 during recovery with disk at 4%

  Hi, I have CW1CGXU and replace the HARD drive but to restore with disk displays error 332. I came to this conclusion that the problem is a version of the sata HDD that is the sata3. Please help me how can I change the HDD to sata1 sata3 driver or do something that the motherboard can be sata3 detected and solved this problem?

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C1000995...

• Error 2100 HDD

  Morning everyone,

  My T420 has error 2100 HDD0 on a few days ago. I went to the IT Help Center and found that the hard drive is completely dead. My original hard drive is seagate 500G. So sad, that all the music and good memorries disappeared.

  I have to update the hard drive. Any suggestions on the SSD? I've heard that I can only update to the ssd 160G, is it true?

  What is the best solution for me on Amazon.

  Thank you very much for your time.

  Welcome to the forum!

  wuepngus wrote:

  Morning everyone,

  Any suggestions on the SSD? I've heard that I can only update to the ssd 160G, is it true?

  No, there is no limit on the size of the SSD storage, as long as you buy a 2.5 model "any size should work.

  I have no experience with Amazon, but if you follow the usual brands such as Kingston HyperX, Toshiba, Sandisk, Samsung Pro and so on, you should have no problem. Currently, the best price per GB is in the order of 240 GB/256.

  Good hunting!

• Problem disc HARD T60 (CODE of ERROR: 2100)

  Hello!

  I have laptop IBM Thinkpad T60 with Intel 82801GBM SATA controller for the chipset (ICH7-M family).
  The HARD drive is new. (WD1600BEVS) My following problem: when I turn on the laptop the first splash screen is waiting, while the hard drive is trying to run.  (I hear a Clack rhythm of the hard drive)
  After 20-30 years, the laptop is going to the error with the following error code: "2100: HDD0 initialization error (3)
  I push the power button to the soft reboot and the T60 is reset.
  The second test is perfect, the XP SP3 is to start. (never of second HARD disk error)
  Every start cold shows this method!
  After the restart, the laptop is running perfect, without any error with something.
  What is this problem?
  How can I solve this?
  Thanks for your help!
  With regard to:
  Robert

  Here is a patch of Lenovo who can actually solve your problem; However, it targets windows vista (and earlier operating systems). My guess is that he still has the applicability to Win 7 also but I would check with support before applying.

  Now, before you download the patch, see the readme file where it specifically identifies your HD problem (CODE of ERROR: 2100) and your new model number of HD (WDxxxxBEVS-08RS) of the corrective measures.

  See here:

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-63685#changes

  Please keep in mind that the fix above (potential) does not exclude the possibility of an intermittent failure of HD; However, it is strange that 'only' your WD hard drive model number is on the affected list.

  Good luck!

• Re: Satellite U500-1 DR-error on Toshiba HDD/SSD Alert

  Dear,

  I get the below error on Toshiba HDD/SSD Alert:

  "Unable to get the information from the disk, cannot use the alert function.

  I uninstalled and reinstalled Toshiba HDD/SSD Alert, but nothing has changed.
  My laptop is satellie U500-1 DR and the operating system is windows 7 (64-bit)

  Thanks in advance

  To be honest this message is not to me clear that the same tool works on my machine.

  Try to reinstall the Toshiba Value added package.

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• Problem with Dell Latitude 2100 (with windows vista) is a driver (file: \windows\system32\drivers\msahci.sys) catch 22, it's that it doesn't have an internal cd-rom

  I have a dell latitude 2100 and when it is consumed first upward it goes to a screen of security and said that is wrong and it is said that the status of this file is 0xc000000f how I could fix this without an installation disk because it does not a cd-rom

  Hi Rick,

  Thanks for posting your query in Microsoft Community!

  The description of your problem, you are facing problems with your Dell Latitude 2100 and receiving tell them an error message which is bad and he said that the status of this file is 0xc000000f. In order to quickly provide a solution, please answer these questions:

  1. What is the exact error message with error code?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you check the drive for errors, and then check if it solves the problem.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Important: While running chkdsk on the drive, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Note: It may prompt you to insert the Windows installation disc. However, you can use the external DVD player and check.

  Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.

• I replaced my netbook with a SSD HD and reinstalled Windows Starter with original OEM key. Now, he had become an evaluation version. How can I fix it.

  I replaced the HD with an SSD in my netbook.

  Due to the change of material (disk) I couldn't use recovery option.

  So, I reinstalled Windows Starter from scratch with the original OEM key (on the back of the Samsung netbook...

  After a delay of a licency says Windows is not is no longer valid (end on assessment) and I have to buy a new version.

  I've already paid for this edition of starter, so I don't want to buy any update.

  Samsung CAL not does not help me, because the licensecode is Microsoft.

  How can I fix it?

  How can I reactivatie this Starter Edition is assembled of original Key?

  have you enabled it? Probably the initial 30-day grace period expired.

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

  If this does not work:

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

  Please indicate the version and edition of windows from your COA. do not specify the product key.

• The distribution of applications and data between the disk SSD and HDD

  I recently installed an SSD in my Macbook Pro (late 2011) instead of the DVD player. I want to install OS X on it, by replacing the current OS X on the original hard disk, I will continue to use for storing files. How should I allocate its use in car? OS X and applications on the data files on the hard disk of 500 GB and SSD?

  The first series of instructions will partition and format the newly installed SSD disk then install OS X on it. The second block will help you configure OS X on the SSD with your data on the HARD drive.

  Clean Install of El Capitan on a new disc

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.

• Help! Export error 27 with only a few videos

  I exported Final Cut Pro X projects directly on my external hard drive. I got an error 27 with one of them, and given that it is exported well I don't think it's a problem with my external hard drive formatting. All the videos have been imported in the same way and the same camera. Any ideas about why this is happening? Thank you!

  Most likely, you export a FAT32 / 'Windows' formatted the disk, right?

  error27 occurs when you attempt to save a file > 4 GB - that is not supported by fat32 (very old format..)

  So, small export projects, larger not. -.

  reformat the drive (erases all content!) to exFat or hfs + / "Mac"...