Problem disc HARD T60 (CODE of ERROR: 2100)
Hello!
I have laptop IBM Thinkpad T60 with Intel 82801GBM SATA controller for the chipset (ICH7-M family).
The HARD drive is new. (WD1600BEVS) My following problem: when I turn on the laptop the first splash screen is waiting, while the hard drive is trying to run. (I hear a Clack rhythm of the hard drive)
After 20-30 years, the laptop is going to the error with the following error code: "2100: HDD0 initialization error (3)
I push the power button to the soft reboot and the T60 is reset.
The second test is perfect, the XP SP3 is to start. (never of second HARD disk error)
Every start cold shows this method!
After the restart, the laptop is running perfect, without any error with something.
What is this problem?
How can I solve this?
Thanks for your help!
With regard to:
Robert
Here is a patch of Lenovo who can actually solve your problem; However, it targets windows vista (and earlier operating systems). My guess is that he still has the applicability to Win 7 also but I would check with support before applying.
Now, before you download the patch, see the readme file where it specifically identifies your HD problem (CODE of ERROR: 2100) and your new model number of HD (WDxxxxBEVS-08RS) of the corrective measures.
See here:
http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-63685#changes
Please keep in mind that the fix above (potential) does not exclude the possibility of an intermittent failure of HD; However, it is strange that 'only' your WD hard drive model number is on the affected list.
Good luck!
Tags: ThinkPad Notebooks
Similar Questions
-
A200 problem disc hard space report
I have a problem with my A200. The size of the disk is 40 GB and it currently has 15 GB in use.
Sometimes the machine suddenly starts indicate that the disc has only 40MB of remaining free space - confirmed by checking the properties for the drive under my computuer. After a restart everything goes back to normal with the appropriate space.
Is this a known issue for this machine? I saw there is a BIOS update available, but can't see all the details of the issues to address.
Hello
in my opinion, you should do an update of the BIOS.
You scan your HARD disk with a current anti-virus software?
You can also run Scandisk and Defrag that check your HARD drive.Chris
-
Hi, I have a problem with the status of disk s.m.a.r.t. hdtune says I have error in b8 (end-to-end error detection) but crystaldiskinfo said nothing about it. should I worry about this?
Mod comment: Over size photo converted to establish a link. Please visit About-Posting-Pictures-In-The-Forums
Dear Ghorowski
Welcome to the community of lenovo
Have you tried Lenovo solution center to test your HARD drive?
Let me know
Thank you
Alaa
-
Hello
I have a problem with the hard drive lenovo z500. Recently, I checked with hdtune pro there 5 or 6 bad sectors, I tried to check with chkdsk, just to be sure and then it says: no error found on the hard drive. Now, I am bit confused should I send my computer laptop to a service provider or not?
Comment to Moderator: Please refrain from bumping your threads / post (s) more frequently than the 3 days. In doing so, unfairly, pushes discussions of other members down. Bumping message (s) deleted.
alessionikky wrote:
Hello
I have a problem with the hard drive lenovo z500. Recently, I checked with hdtune pro there 5 or 6 bad sectors, I tried to check with chkdsk, just to be sure and then it says: no error found on the hard drive. Now, I am bit confused should I send my computer laptop to a service provider or not?
Comment to Moderator: Please refrain from bumping your threads / post (s) more frequently than the 3 days. In doing so, unfairly, pushes discussions of other members down. Bumping message (s) deleted.
Try the program of diagnosis of the manufacturer of the hard disk to be sure.
-
How can I fix the problem with teredo tunneling code microsoft error showing adapter 10.
I tried to uninstall and re install it, then changed to-peer automatic grouping, but nothing has worked.
It is a known problem if you have Zone alarm installed. If you have installed remove it at least to checkTo disable Teredo tunneling 6to4 interface open an elevated command prompt and type
netsh interface set terredo disabled state.To re - install- Click on start.
- Type Device Manager in the start search box, and then open it.
- Click the Action tab on top and click Add legacy hardware
then click next and next again, he will then scan and find nothing then click on the screen after that.
Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
-
Need to reinstall the driver for (Mono Audio) BH29, code 10 error.
Original title: There is a problem with the driver for BH29 (Mono Audio).
There is a problem with the driver for BH29 (Mono Audio). The driver must be reinstalled.
The device of information informationName: BH29 (Mono Audio)ID: BTHENUM\ {00001108-0000-1000-8000-00805F9B34FB} _LOCALMFG & 000A\7 & 193F9B9F & 0 & 001A7DFC60D1_C00000002Error code: 10Hi MohamedAbou,
To provide the proper resolution, I would need more information on your side.
1. when, exactly, you get this error code?
2. did you of recent changes on the computer before this problem?
The Code 10 error produced mainly because of the equipment and devices, driver problems. It can also occur due to problems of compatibility between hardware and software drivers additional that are installed on the windows.
I suggest that you try the procedure described in the article and check if it helps.
The problems with Bluetooth devices
http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devicesNote: Applies to Windows 7.
Check out the link for more information.
Connect to Bluetooth and other wireless or network devices
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
This ext drive works on a notebook of friends (windows 7) and works also on the desktop (windows XP) but work on that notebook (windows xp). I realized problems as recommended by a number of times. Problem remains.
Hello
-What diagnosis made?
One of the motors controlling the unit does not work.
First, run the troubleshooting material the Article from Microsoft fixit.
Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/
Failure to fix, then uninstall and reinstall the device drivers.
- Click on Start then RUN and type Devmgmt.msc in the RUN box.
- Click disk drives in the list of hardware
- Click on the USB external hard drive with the question and click Uninstall.
- Once the hard drive is uninstalled, disconnect the USB cable.
- Wait 1 minute and then reconnect the USB cable. The driver should load automatically
- Search the external hard drive in Windows Explorer
You can view the documentation for the hardware for more information about diagnosing the problem
For reference:
Explanation of error codes generated by Device Manager in Windows XP Professionalhttp://support.Microsoft.com/kb/310123
Hope this information is useful.
-
Satellite M30: Unknow Hard Error - could this be a problem of hard drive?
I got my Satellite M30 for 2 years now and it never gave me any problems, until a few weeks ago. The problem started shortly after I put Windows to SP2, when I played a game it would stick for a minute or two, and then continue on as usual, the problem slowly got worse and started blue screening with "Unknown hard error" and sometimes strange balloon in the lower right corner saying unknown hardware error and then freeze it. It also took a long time to start and generally do nothing.
Assumed it was a problem when I've upgraded to SP2, so I decided to reinstall Windows and start over again, update the BIOS while I was home.
Once this is done it seemed fine for an hour or two, but then tried to install a game and of course, the good old blue screen appears and the whole problem starts again.
I took it to a repair shop and explain the problem and I had re-installed Windows nothing helped, and I suspected that it may be a hardware failure, I left it with them, and 2 days later I get a call saying its all fixed and ready to be picked up, I asked what was wrong with it and they said that they re-installed Windows and sound now works fine (i.e. what I their) I said, I had made and n t worked!). I picked up (and got charged £40 to have done what I had already done). I got it home and everything seemed ok... for a few hours, then blue screens seemed to tell me any physical dumping of beginning and the usual stuff.
I think it might be a drive problem hard, like when I tried to install a game on it at night last light CD and HARD flash drive, one for about 15 seconds, then the other for a short time, data copied from one to the other, but then the HARD drive light stayed on, and I could hear the HARD disk as if it were sticky , after about a minute of this blue and close short-listed and took some time to turn back. If I leave a couple of hours and it starts fine until the next time.
So, after my long description on my problem, I have 2 questions,
1. could I be right in thinking that these problems are associated with hard drive?
2. If I'm right, is easy to replace on the M30 HARD drive and where I would buy a new?Thanks for your time and help,
Kenny.
Hello
The blue screen appears only if you play games?
But I agree with you. In my opinion, there would really be a hardware malfunction.
The question is - it s a HARD drive or something different?
Hmmm. I think that the problem is not related to the disc HARD but maybe overheating?
According to the publication, sometimes when you play games. The game is a high performance application. All devices running with maximum performance and produce heat.I m not 100% sure, but maybe the high temperature has a bad influence on the system and therefore the BSOD happens.
You suggested that the laptop run properly for about 2 years. Maybe fans can cool properly because of the dust and debris. Two years is a long time if you have not cleaned the cooling modules and fans. -
Get the 7 output code fatal error when you try to resolve plugin problem
Exit 7 code fatal error 0, 81 errors, 48 warnings when you try to solve problem of plugin when you restore the default set of PS CS5 > relocation of the installation with SN disc accepted.
Errors ' Exit Code: 6, "" Exit Code: 7 ".
Mylenium
-
I have a problem with the code c0000135 error does anyone have a solution to this
I have a problem with som kind of virus code c0000135 error anyone has a solution to this
Hello, masts,
What were you doing when the error occurred?
What makes you think that there is a problem with a virus?
View all content of the message, please.
During this time:
Restart your computer and start typing the F8 key
Select Mode safe mode with networking
Download the following tool and run a scan complete to rule out malware
http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
While still in safe mode, use this scanner (precaution) free online
http://housecall.trendmicro.com/
Restart Windows
Start > type CMD
Press ENTER if you are using Windows XP
If you use Windows Vista or Windows 7, right click on CMD and select run as administrator
Type the following: sfc/scannow
Press enter
Note: There is a space between sfc and / scannow
Asked may to your Windows installation media if corrupt files are found. The System File Checker will repair the files if possible. If it can't, you will have to reinstall Windows
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833/PL
You can also see this re: same error
Windows 7 service pack 1 update failed error C0000135-missing sqmapi.dll
-
Comcast is offering a new PROGRAM to solve the problems of internet connection called. My computer it does not open. An said Comcast error code 401 error code. Does anyone have an idea why it won't work?
What internet connection problems that you think you are EasySolve of Comcast could correct?
Related...
http://www.broadbandreports.com/forum/r27178355-Comcast-EasySolve-
-
Original title: Ox8000700020
Hi, when I try to back up my files to an external hard drive I get error code 0 x 8000700020 how to stop what is happening
I have merged the new post with the original question.
-steve
-
CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?
Try following the steps under "Windows XP" in the article following the MS KB:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
-
Have window xp error. A problem is preventing windows to check exactly the license for this computer. error code 0 x 80090006. Then it disconnects you return to the screen of the user menu.
Error code 0 x 80090006
This problem occurs because the drive letter has changed or that some files can be found in default locations.
See: http://support.microsoft.com/kb/914232
You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer
When you try to start a Microsoft Windows XP-based computer, you may receive an error message that contains different error codes. This article describes the causes of the different error codes. This article also provides workarounds for the following error codes:
- Error code 0x80004005
- Error code 0 x 80090006
- 0x8009001d error code
- Error code 0 x 80070002
- Error 0x8007007f code or code error 0x8007007e
- 0x800705aa error code 0x8007007e error code and error code 0x80004005
- 0x800705aa, error code 0 error code 80070002 x, error code 0x80004005, 0x800405aa error code and error code 0 x 80090019
- 0x800703e7 error code
Additionally, this article contains workarounds for some error codes that aren't in this list.
etc.
TaurArian [MVP] 2005-2011 - Update Services
-
original title: Itunes problem
my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330. "What should I do?
Contact the manufacturer (Apple) of the application (iTunes) you are having problems with.
Uninstall all previous versions, try to download (re-record not running) and then do a right click on it and RUN AS ADMINISTRATOR.
(Vista 32-bit or 64-bit)?
Maybe you are looking for
-
Where is the plug in the wizard?
When I ran Firefox the second time a tab containing the wizard plugin firefox was on top. The first thing on this tab has been updated Adobe Flash player. I did it and during the installation of Flash player necessary I close Firefox. When I restarte
-
External HD fat32 partition is not mounted
I've updated to Yosemite to El Capitan 10.11.2. My external hard drive has 2 partitions, 1 used for Time Machine, the other partition formatted in Fat32. Everything works fine so far. I had to make some adjustments in SIP (csrutil toggle) to get my w
-
Download El Capitan and Yosemite still shows as operating system after reboot
Download of El Capitan, full upgrade but functioning does not appear on the computer
-
I used to have to cut & later restart my phone about every two weeks, simply because of flight. Now the new rules allowing the phone to be just average flight mode, I can't do that. So this means that my phone had not been extinguished for at least s
-
HP C4280 WITH PAVILION: HP C4280 PRINTER DOES NOT WORK WITH WINDOWS 10 - NEED ADVICE!
I GET THE INCOMPATIBILITY MESSAGE WHEN YOU TRY TO PRINT AFTER INSTALLING WIN 10. PTR WORKED WELL WITH WIN 7.