receiving error code 39 for dvd, driver will not load.

replace corrupt cdrom.sys

small management business of vista 32 bit. receive error code 39 for dvd. driver will not load. I tried to uninstall. same question on re - start.

I tried regedit suggestions. UpperFilter deleted, no lower filter exists.

In addition to the above on the excellent advice, cdrom.sys is not corrupt.

Tags: Windows

Similar Questions

What does the error code 80240016? my computer will not install updates

What does the error code 80240016? my computer will not install updates!

http://support.Microsoft.com/kb/957307

Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

If the above does not resolve the problem:

Windows Update Forum:

It comes with Vista, upgrade install and activate Forum.

You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

In this way, you will receive the best help.

See you soon.

Mick Murphy - Microsoft partner

CD/DVD drive will not open a picture disc

My CD/DVD drive will not open a photo record, any ideas? It used to work and now will not, it is not an old computer

Hello

Here's what you can try to solve the problem: http://support.microsoft.com/kb/330135

I have a Dell Inspiron 1525. The player/cd-DVD drive will not work. The help section it says it is (code 10). The drivers seem to be installed. Can you help me please? Operating system is Windows Vista Home Premium

I tried the support centre and followed their advice, but no luck yet.

Hello

Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/

Please make all below even if you have done some before as it is often the set of operations which solves the problem.

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Hope these helps.
Rob - bicycle - Mark Twain said it is good.

CD / dvd drives will not read / write to any disk

Hi, can someone help (first timer) I have two cd/dvd drives will read / write to disk get them all is a window pops up asking me to insert the disc. all my drivers are up to date, my Device Manager shows two active drives and works correctly, I use service pack 2 and I have installed a new software/hardware. my computer is a dell XPS 420 that is now three years old and this is the first time that I had any problem that I have not been able to solve. Help!

Hello

Its not unusual for the same problem have an impact on both drives, in fact its very common.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps and happy holidays!

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

my cd/dvd drive will not read or burn.

When trying to burn a cd it just telling me insert blank disc, but there is already an in

Hello

Used speed, the actual brand of discs, burning and if file Live or mastered all come into play.

You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.

Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.

Several good info here:
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

==================================================

Follow these steps to remove corruption and missing/damaged file system repair or replacement.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

--------------------------------------------------------------------------------------------------------

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Toshiba cd/dvd drive will not read or eject or anything like that!

Cd/dvd driver for my Toshiba laptop will not work. It lasted about a year, then he became gradually sporadic to read/write or ejection and by last winter, he stopped all together. I've uninstalled and reinstalled the drivers for it, and in Device Manager, it says that the device is functioning normally; every once in a blue moon it will suddenly eject, but then if you put something in nothing happens, even not with the original disks. With the repair utility, it says something like unreadable media, at best. I'm a little confused as to what is happening here, so, what steps should I take to verify if it is indeed the drive disc or something in the software?

Thanks, Bruce

Hello

You may need to check with Toshiba Support, documentation online & drivers and their forums
for problems known.

Toshiba - Forums
http://laptopforums.Toshiba.com/

Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

Toshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

Toshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

--------------------------------------------------------------------------------------------------------

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

My CD/DVD drive will not appear in the Device Manager, but present in the BIOS.

DevCon didn't find it. It will not open even if I don't get to Device Manager and check for changes to the system. I deleted the registry entries upper and lower limit. Any other suggestions? For additional emphasis, he does not show even in the Manager of devices so I cannot restore or reinstall the drivers from there. It might also help that I use Vista Home Premium on a Compaq Presario F755us.

Hello

(1) does the BIOS see the main hard disk drive or a secondary hard drive?

(2) remember to make changes to the computer before the show?

You know may not be not that most systems are set to show only the splash screen. If you go into the BIOS Setup, it should show the disks that have been detected on two primary and secondary IDE channels.

Note: the basic procedure to change the setting of the disk controller is to restart your computer and enter the system BIOS. The most common method is to press F2 to enter Setup, (another PC may use a different key). On the BIOS screen, find the setting that offers the AHCI, ATA or IDE and RAID. If the parameter is set to AHCI, change the setting to ATA. Restart the PC on the Windows installation disc

Warning: Incorrect settings in the system BIOS can cause your PC function incorrectly. If you are not familiar with the configuration of the BIOS of the system, you must contact the PC manufacturer for assistance.

Try the steps in the following article and check if it helps.

My drive does not appear in Windows Explorer

http://support.Microsoft.com/kb/330140

Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

You can also check the following items.

CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista: http://support.Microsoft.com/kb/929461

Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk: http://support.microsoft.com/kb/952951

I have an error 39 and my cd - dvd drive will not read any disk

My drive does not work tried several troubleshooting technicians.

Try following the steps under "Windows XP" in the article following the MS KB:

http://support.Microsoft.com/kb/982116

These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

Create a System Restore Point beforehand and restart the computer later.

HP Pavilion p7-1234: functional CD/DVD drive will not boot Clonezilla disk recognize

Have three HP p7 in small desktop running Win 7 64 bit. (Avast free version)

None of them will recognize a bootable Clonezilla ISO or Zip, whether on CD/DVD or USB.

Measures already taken:

BIOS set to boot from CD/DVD

In turn the BIOS configured to boot from USB

Have used any compatible version of Clonezilla downloads based on my operating system and the processor, including the generic i686 ISO and Zip. (and makes bootable USB drive)

CD/DVD and USB function perfectly well otherwise. Able to access the other disks and USB media with no problems.

Also able to see the Clonezilla ISO when I look at the CD/DVD drive.

It starts simply what whether Clonezilla.

If someone has encountered this, I would like to share your experience.

Thanks for your time.

One rookie mistake.

Problem:

Bad, I carved the Clonezilla ISO to CD/DVD disc.

Solution:

1. download the ISO Clonezilla appropriate for your computer, on your desktop.
2. place the disc in the CD/DVD drive
3. "right click" on the Clonezilla ISO on your desktop.
4 Select "Burn Image" and follow the default values.

Now you have a proper boot Clonezilla disk.

Next:

1. make sure the BIOS is set to CD/DVD is bootable.
2. place Clonezilla disc in open the tray of the CD/DVD drive.
3. restart the computer and close the CD/DVD tray
4 put your finger on "F9" key and now wherever the blue HP screen appears, press "F9".
5. boot Menu loads.
6. move arrows down to the first line indented under "ATAPI CD/DVD DRIVE...
SATA2 or SATA3 will be according to your system.
7 hit ENTER.

Clonezilla immediately, boots and loads.

I hope it works for you.

Error code: 80170017 MSE virus definitions will not be installed.

Original title: 80170017

error code; MSE virus definitions will not install.

Correction of method 1 does not work

Method 2 fix (I'm rename.bat on desk) but right click is not the run as Administrator option.

I have XP Pro SP3, Zonealarm, Spywareblaster, Spybot S & D w.teatimer, Malwarebytes

Hello

· What are the troubleshooting steps that you try?

· What solution did you run?

Before Windows updates, follow these methods.

Method 1: Reset the Windows Update components.

http://support.Microsoft.com/kb/971058

Method 2: Disable all third-party security software, except for Microsoft security Essentials.

Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

Method 3: Put the computer in a clean boot State prior to update installation to see if there are any software conflict as the clean boot helps eliminate software conflicts.

Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

Method 4:

You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

http://www.Microsoft.com/downloads/en/default.aspx

How to manually download the latest updates for Microsoft Security Essentials definition (valid also for Windows XP)

http://support.Microsoft.com/kb/971606

Reference: http://support.microsoft.com/kb/906602

CD/dvd drive will not read/burn CD

Dell Dimension 4700 w/TSST CDRW / DVD TSH492B

Originally, the PC does not recognize even the original drive. (Not sure what happened there...) Then I followed your "5 steps", open the PC and unplugged and reconnected the cables power and data, in Regedit, F12 and F2 and now the drive will read CDs of music via Itunes, but the habit of reading a photo previously burnt cd. It won't burn a cd. (I burned before CD on this PC)

When I put in the cd, I hear he's trying to 'catch', but only about 3 waves of tours then... nothing. I have Sonic RecordNow software (supplied with the PC) of engraving and HP photo software and recognize that there is a blank cd - r in the drive D: ready to record.

(I'm pretty computer) But I am confused as to why it won't read or burn. I am due for a new disk? I would be surprised that we have not much used because again a few years ago, we bought the Dell. (I've never even played a DVD on it) For most of the picture and music CD.

Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

Thanks in advance.

Hi quietly,

If your CD/DVD drive doesn't work, how do you have a system restore?

Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
Check this box!

Programs install correctly and I keep getting error codes when they stop or will not be installed.

I can't install programs. I have XP Professional 32-bit. When I try to update DirectX, I get error messages like "Program has failed the integrity Scan" or he said: he did not like a piece of furniture, or a file in the program has been corrupted. When I try to install Adobe Reader, it stops with error code 13042 and wrote that a program interrupted the installation. I have done 3 installs own to solve these problems, but they continue to flow upward. Validation always works very well. But even some other microsoft programs will not properly download. How can I fix them?

Hello

· What is the number and the model of the computer?

· What is the service pack installed on the computer?

Check out the links below and try the same thing no and check if this may help: installation of Flash Player error: "download failed the integrity check (16236.304.443)": http://kb2.adobe.com/cps/512/cpsid_51258.html

Description and explanation of a CAB file: http://support.microsoft.com/kb/310435

How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651

CD/DVD drive will not appear on VMWare Fusion.

Recently I have not been able to use the CD/DVD-ROM drive on vmware fusion. I try to connect the physical device by clicking on the image of the CD rom at the bottom right, select Connect by car, but when I put in a CD, nothing happens.
When I go into "My computer" the drive icon is not present.
I tried all settings in Fusion as changes (move to "Reader of CD/DVD physical specify" instead of "Automatically detect physical CD/DVD drive") but still no luck.
I can't find any help on this issue. Help, please.

Take a look on: CD/DVD not recognized in the virtual machine

receiving error code 39 for dvd, driver will not load.

Similar Questions

Maybe you are looking for