Error 49.60FF on 4240n when printing from Mac

Similar Questions

• folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

  Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

  When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

  It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

  Any thoughts?

  Hi @Bodija ,

  I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

  When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

  Here is a document to clean the rolls of paper to see if that will help.

  A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

  Go to Solution 5: clean the rolls of paper.

  Using the full feature software drivers?

  Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems with it is software related, try the following steps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  How the name of the printer was placed in printers and Scanners?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• Printing blank pages when printing from Word 2007, WordPad and Notepad, print well other programs

  Weird printing problem

  Good, in Windows Vista and using a printer HP Deskjet 645c with the updated driver, here's the weirdness:

  When printing from Word 2007, Wordpad and Notepad, the sheet through the printer appear in print, but no printing actually takes place. Same for the two existing documents and those newly created. On the other hand, everything prints normally IE8, Firefox and Adobe Reader. Reinstalled the printer driver and also to delete the Word data key in the registry. No love. Automated ran, troubleshooting of MS, but still no love because he found no problem. Someone at - it a good idea? Seems there must be something in common between Word, Wordpad and Notepad, which I suppose are at least somewhat in the code, or perhaps in the way they approach the printer driver.

  Hi TNCharlie,

  (1) I want to clarify if you arejust I try to print the text or insertion of objects into Word and WordPad?

  Fonts and graphics damaged can cause printing problems in Word/WordPad

  (2) using a wireless printer?

  Check to see if it makes a difference if connected.

  Step 1: This test in word

  1. open a new blank document in Word.

  2. on the first line of the document, type the following text:

  = Rand (10)

  3. press ENTER. This inserts 10 paragraphs of the sample text.

  4. try to print the document.

  5. If the document prints correctly, replace it with another font or insert a clip art image, a table, or a drawn object

  Step 2: Don't know if you have tried this fixit, please run the fixit available in the link below and check if that makes a difference

  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems/en-us

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit ourMicrosoft answers feedback Forum and let us know what you think

• Office jet pro 8600 how default to black ink only when printing from my ipad

  Is it possible to set an option to print the black ink only when printing from my Ipad 2?
  When I use the print icon the only option that shows is double page. I would like to be able to print in black only.
  I can set this option when you print from my pc...

  Hello

  AirPrint does not support black ink only printing, however the HP ePrint app allows it.

  Note that the option is available only for documents (for example Office, PDF, Web pages and emails files), but not for the Photo files.

  You can find the steps to obtain and use the application in the document below:

  http://support.HP.com/us-en/document/c01616126

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Stops printing when printing using Mac 10.6.4

  When you print a multiple pages of the Word document, print job stops after printing 1 or 2 pages - the printer is paused. What CV selection print printing stops and starts all over again. Have the same problem when printing from Excel.

  I use a HP Photosmart 3210 all-in-one printer.

  Does anyone have a solution to this problem?

  Flemming

  Solution found

• uninstall a printer from mac pro book.

  uninstall a printer from mac. book pro.

  Open

   > Preferences system... > printers and Scanners > select printer on the left, then click on the button "-" below.

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Massage of error HP 7000 printer when printing from internet

  error massage

  Line: 2126

  Chair: 1

  URL: res: / / ieframe.dll/preview.js

  Now, I can print from the internet. I have reinstalled the software.

  Thanks for all the help.

• The printer options not available when printing from Lightroom

  Hi all

  I have a problem with the interface of Lightroom 2 (version 2.4, executed in 64-bit mode on my Intel Apple Mac with Mac OS X 10.5.8 (Leopard)) to my printer driver, an Epson Stylus Photo R800.  I can see looking through the forum that there has been a lot of problems with printers, but none as far as I can see that seem to cover my particular problem.

  In the Lightroom print module, after setting everything up, selecting the correct ICC profile for the printer/paper etc. I click on the button "print...". "at the bottom of the right panel to launch the dialogue of the printer.  My problem is that the essential options, I need access to this printer dialogue, namely 'Print setting' (to determine the media type, and print quality) and "Color management", (to disable the printer color management)-are disabled.  To be exact, these options have a line through them, as if they were crossed.  "Print option" and "Setting the Extension" are similarly disabled, while "Layout", "Paper handling", "Cover Page" and Planner "are available.  (See JPEG screenshot attached.)

  If I try to select one of the options not available such as 'Color management' I see the following on the screen error message:

  "The bundle 'Color management' couldn't be responsible because it does not contain a version for the current architecture.  Contact the creator of all here for the most recent version: Color Management 3.09, SEIKO EPSON CORPORATION 2001-Copyright (C) 2005. All rights reserved. »

  The strange thing is, if I print from Photoshop CS3, there is not this problem: "Print setting" and "Color management" are not disabled, and I can make the adjustments I want.

  Coming off the printer prints color are way off if I print from Lightroom, so that from Photoshop, they are great - I guess because of this problem (I can not turn off printer in Lightroom color management, so that I can in Photoshop).

  I guess that this is a problem in the interface between Lightroom 2 and my printer driver, but I find it strange that I don't have the same problem in Photoshop.

  I have re-installed the latest printer driver downloaded from the website of Epson many times, following the instructions to the letter to Epson to remove the old drivers of my machine, to nothing does not.

  I really want to print from Lightroom instead of Photoshop, I like the simplicity of the Lightroom print module.  Can anyone throw any light on this?  Any help or ideas gratefully received!

  Thank you

  Ian

  Just save a driver of printer/preset in any 32-bit application. Then apply this preset when you print from LR runs as a 64-bit application. It is only the interface that is the problem. It should show very well, at least it does with Canon printers.

• DeskJet 3050: HP Deskjet 3050 nothing happens when printing from a laptop computer, but works very well of others

  So I just got a new laptop and I am trying to connect to my printer. I think he has connected all the beautiful and the printer will appear on my laptop. When I go to print something good, it is said that it is printing on my laptop (including indicating the percentage of how much it is printed) before disappearing from the queue on my screen. Nothing happens however on the printer.

  When we use another laptop that is connected before, it prints perfectly.

  Not really sure what is in place and was hoping someone could help me!

  Thank you

  Hey @burtonc,

  Welcome to the Forums of HP Support!
  
  I see that you have some problems with your Mac OSX 10.11 machine printing the Deskjet 3050 all-in-One printer. I can help you with that.

  To resolve this issue:

  1. If the printer is connected via USB cable to your Mac, delete it.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left side.
  4. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the 'more' in the corner.
  2. Select your printer from the list.
  3. Click in the box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results follow these directions. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Hide email address when printing from Windows Live Mail

  Original title: "hide email address when printing.

  Hello
  Please how to I could hide my email address when I print a document from Windows Live Mail.
  Hassan
  Bangladesh

  Thank you for visiting the Microsoft answers community site.

  The question you have posted is related to Windows Live Mail and would be better suited in the Windows Live Solution Center.

  Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/forums.aspx?ProductID=15

• Image reverses from positive to negative when printing from Windows Photo Gallery

  When I try to print directly from the photo gallery in the overview page positive image flashes until shortly before the reversal to the negative and I see nothing in the preferences of the printer (Canon iP4500) to remedy this.

  The effect occurs only on jpg that were downloaded from my own camera - other jpg is OK.

  I have no problem with the same images when printing in Photoshop.

  Hi bigfritz,

  Welcome to the Microsoft answers community site.

  Different types of devices tend to possess the capabilities and features of different color. Displays, for example, cannot show the same color scheme that can reproduce a printer. It is because of the fundamentally different processes that each device used to produce color content. Scanners and cameras have different color characteristics. Even different programs sometimes interpret and process colors differently. Without a consistent color management system, the same image can look different on each of these devices. The appearance of the content of the color depends also on the viewing conditions (for example, ambient lighting). This is because the human eye adapts differently to different conditions, even when you view the same image.

  Thus, the color management manages relationships within color content so that an acceptable appearance can be achieved on different devices with different color and in conditions of display capabilities. This requires color management systems to control the relationship between the characteristics of the device and viewing conditions to produce acceptable results.

  Color profiles are usually added automatically during the installation of new devices. Color profiles can also be added by color management tools, such as devices of calibration for the monitors. As a result, it is likely that there are already profiles for your devices.

  However, if you need to install a new profile, follow these steps:

  1: open management the colors by clicking on the Start button, clicking Control Panel, hardware and sound, and then clicking color management.
  2: click on the devices tab.
  3: in the list of devices, select the color device that you want to associate with one or more color profiles.
  4: select the use my settings for this device check box, and then click Add.
  5: you should see a Source to sRGB space. In the print profile you must now select the barrel profile that fits the study. You should see these choices for Canon paper.

  Canon IP4500 series GL2
  Canon IP4500 series GL3
  Canon IP4500 series MP2
  Canon IP4500 series PR1
  Canon IP4500 series PR2
  Canon IP4500 series PR3
  Canon IP4500 series SP2
  Canon IP4500 series SP3

  6: these correspond to specific types of paper Canon - PR > GL, Pro Photo paper > iced, MP > Matte
  7: then go in / intensity of the color and choose the manual Option. Click on Set and in respect of the Correction colors choose None.

  For more information, see Color settings management: frequently asked questions

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,
  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• Idle print message when printing from a Mac - HP Officejet wireless 6600

  I'm having a problem with my HP Officejet 6600.  When I try to print from my Macbook Pro, I get a message from idle on the print screen.  It is to show that it is connected, but do not print.  Besides I could scan wireless to my computer from the printer and test printing in the utility window on my Mac.  This problem is confusing because it was able to print last week and now can not.  Also the printer print wireless from my PC, but not the Mac.  Help, please.

  Restart the printer.  Let me know if that suits him.