Stops printing when printing using Mac 10.6.4

Similar Questions

• 8500 A910g: double sided printing no longer works on 8500 A910g printer using Mac

  Can someone help - double-sided printing stopped working on 8500 A910g printer using Mac?  I used to be able to toggle the menu layout on the printer, but now it is gray out and one side only the default

  Thank you, Rob

  Hi @robgit,

  Please check back with the results of your efforts.

  You may need to configure the automatic duplexer in the HP printing software.

  Discover sone of the procedure described in this document - printing on both sides of the paper (duplex) (OS X). Note: This model of printer supports automatic duplex printing. Scroll down to "How do I duplex automatic if my printer takes in charge?" in the FAQ section.

  Please let me know if it helps.

  Thank you!

• Mouse Bluetooth stops working when you use Remote Desktop

  Hello, I have a Dell i7 using Windows 8 and a comfort Sculpt bluetooth mouse.  The two work together well, but when I use remote desktop, the mouse stops working.  I have checked the logs of windows, but don't see anything apparent that would explain the bluetooth mouse to stop working with RDP.  Is this a known issue?  And is there a known solution?

  Hi Sharief, thanks for the quick response!  I think that I could find my own solution to the problem.  I ended up remove the bluetooth driver that came with my Dell laptop and allowed the Microsoft Generic bluetooth driver to take charge.  The mouse now works like a charm, especially when I am using RDP.   I did have a problem again on the generic driver.  Thanks again!

• Sometimes my keyboard stops responding when you use Photoshop CS6, & I have to restart

  Since I've upgraded to Photoshop CS6, I found that every one time from time to time the keyboard not responding.  I can't tell if something specific that I'm doing it triggers, but I will be editing an image and press a shortcut key and find that it doesn't work. This does not happen when I first open an image, but usually after that I worked for a while. As far as I can tell (it's pretty random) it seems to happen when I use a tool to apply an effect to an image, like this last time, it happened when I used the Spot Healing Brush several times on a photograph. (Of course it could be correlation without causation, since I'm a big fan of the Spot Healing Brush and tend to use a little whenever I'm editing photos). Note that the modifier keys still work, but all the letters and the keys do not respond.

  Sometimes - and lately it seems that it always happens, there is a sound associated with the shut-off valve.  It is possible that the times I heard the noise, I had my speakers.  It's a short clicking noise - and I don't think that's it integrated alert sounds on my Mac, because I just listened to each other and I remember that noise is different - but the sound is certainly coming from my speakers and is not a mechanical noise from the machine.  I don't know what could be causing this. I saw someone complaining about this a couple of years, who thought it might have to do with a Wacom tablet. I own one, but do not always use it, and what happens even when I'm not using it.  The only way I found to get my keyboard answer again is close Photoshop and restart.

  I'm on a Macbook Pro 2.66 GHz Intel Core i7 with 8 GB of Ram. I'm on OS X 10.7.4 (not quite ready for Mountain Lion).

  Okay - looks like I solved my problem after a few hours looking for related problems on the web.  It is not a problem with Photoshop but with Mac OS X.  The mouse and trackpad 'Universal access' default preferences are set to "Press the Option five times to enable or disable MouseKeys." So, when I use a tool that I'm editing with the option key, key and I repeatedly use it five times in a row, I hear the rattling which means "Mouse keys" lights (and disable the regular keys). Turn this option off, and the problem is solved!

• I get a window saying that a problem caused the program to stop working when I use my incredimail and also my tree maker genealogy program how fix this?

  I'll have my tree maker genealogy program open and all of a sudden, I get the message "a problem caused blocking the program works correctly. Windows will close the program and notify if a solution available. "This also happens when I use incredimail.  Whenever I click on a new email message sometimes.  I used incredimail and family tree maker on this vista for many years and this just started happening the past two weeks.  Thank you

  Hello

  1. don't you make changes to the computer before this problem?

  2. what security software is installed?

  3. what browser you use to access incredimail?

  4. have you updated to Service Pack 2 installed?

  Let us try these methods.

  Method 1.

  Start the computer in safe mode and check the status.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  Method 2.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can use the restore points for Windows Vista to return to a previous state, when your computer was working properly.

  What is system restore? : http://windows.microsoft.com/en-PH/windows-vista/What-is-System-Restore

  System Restore takes a "snapshot" critical system files and some program files and registry settings, and then it stores this information as restore points. If your computer is not working properly, you can use these points to return Windows XP to a previous state when your computer was working properly restore.

  Method 4.

  If you use Internet Explorer to access with incredimail, you can reset Internet Explorer default settings and check if it helps.

  Reset Internet Explorer 7 settings: http://windows.microsoft.com/en-in/windows-vista/reset-internet-explorer-7-settings

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Additional information.

  If the question is limited to the Incredimail application, you can post this question in the Incredimail Forums: http://forums.incredimail.com/

  Method 5.

  You can also post this question in the support of Family Tree Maker: http://ftm.custhelp.com/app/ask

  http://www.familytreemaker.com/support

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• HP Envy 110 - cannot scan from printer (using Mac Maverick)

  I have a MAC with OSX 10.9.4 operating system and a printer HP Envy 110 with the newest driver printer HP Maverick.  I can scan Mac.  However, I can not run a scan directly from the printer control panel.  The sign says "make sure that the HP printing software is installed.  For MAC and USB connections, "Enable Scan to Computer" is automatically activated".  Everyone else has had a similar problem?

  Hi Melnee,

  Thank you for your answer! Please, try the following solutions:

  • Reset the printing system. OS X Mavericks: reset the printing system.
  • Verify and repair disk permissions. 12.x disk utility: repair disk permissions.
  • Look at this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005.

  Hope this information is useful and have a great day!

• Error "intellistor backup engine module has stopped working" when I use Samsung Auto Backup.

  Original title:

  I have a 1 TB Samsung external drive.  It is came with Samsung Auto Backup software on this subject, so I loaded which.  Many worked for several months, but now I get an error message Windows 7 "intellistor backup engine module has stopped working".  Nobody knows how to solve this problem of Windows 7?  I remember not to make changes or new software from loading when the error message first showed.  I prefer to use this automatic backup, because it is easy and can be left alone.

  Hello

  The problem is specific to this particular application?

  Try the following methods.

  Method 1:

  Perform a clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: once you are done with the boot, follow step 7 in the article to restore your computer to a normal startup

  Method 2:

  Uninstall then reinstall the app and check.

  Uninstall or change a program

• The Windows Shell common DLL has stopped working when you use the joystick havit HV G82

  The Windows Shell common DLL has stopped working...

  I have a gamepad havit HV G82 try to run win 8

  When I go to control panel > devices and printers > game controller settings > properties

  In properties each time I click on Vibration Test tab, I get this error "The Shell common Dll Windows has stopped working"

  When I play games also buttons map correctly

  Any help is very appreciated

  Thank you.

  Hello

  Have you managed to solve the problem by using another approach?

  You can contact the manufacturer of the device to check what they have to say on this issue.

• The Windows Shell common DLL has stopped working when you use the joystick Frontech JIL 1731

  Original title - Windows Shell common Dll has stopped working...

  I have a Frontech JIL 1731 gamepad

  When I go to control panel > devices and printers > Generic USB Joystick (Game Controller Settings) > properties
  In the properties... Whenever I click on Test of Vibration tab... I get this error (link to image): http://img341.imageshack.us/img341/8023/capture1hce.png
  Please help me with this error and more I can not play with vibration... means I can use the controller to play games, but there is no vibration...:(j'ai aussi tourner sur la vibration dans le jeu...:/)
  Help, please
  Thanks in advance
  My assembled computer specs are-
  Motherboard ASUS M5A88-M
  AMD FX-6100 (3.30 GHz, 8 MB L3 Cache)
  AMD Radeon HD 5450 1 GB
  8 GB RAM
  Windows 8 Pro x64bit

  you are awesome... I have beeen trying several solutions to the problem of vibration, but your technique works like a charm

• The music stops playing when you use Instagram

  Hello

  I looked at just my Instagram feed and music continues to stop whenever I passes a video. Yesterday, he did not do that.

  Anyone else having this problem.

  I use iPhone 6s more with OS 9.2.

  NNever mind, it strangely works very well now.

• First Elements 10 stops working when you use Pan & Zoom

  After using pan and Zoom on images 2-3, a message appears that first elemets 10 no longer works and will close. Then I can restart the program and do the same thing on 2 or 3 photos again. Any ideas what's happening?

  Make sure your photos are no larger than 1000 x 750 pixels in size, per the recommendations in our FAQ?

• When you try to scan, print says "configure the pc to start scan. using mac.

  When you try to scan on PIXMA MG5722 I get the message 'set the PC to start scan.  I can scan marketing PC but no printer.  With the help of iMac.  Need to scan documents on the printer using the printer scan button.  How can I fix it?

  Hello.

  According to the version of Mac OS x that is on your computer, you may need to scan using the software on your Mac.

  If you use OS 10.11, please scan from the Scan IJ utility instead.  This program are in the Canon Utilities folder in Applications.

  If you need additional help in this issue, find more help contact us.

• How to stop the print cover sheet when you print using eprint? I have a B211A 6510

  When you print using eprint address, I get an in addition to the document cover sheet.  I'm wasting paper and ink.  How can I stop this page from printing?

  There are a few options depending on where you are sending from. If it is a document that you join I guess its from a PC, but I'll give you the mobile option as well.

  The HP ePrint app on devices like iphones and ipads, or home HP ePrint and biz app on android, allows open files and send them via eprint not at home without actually sending an email. In other words, there is nothing in the body of an email to print. The link below you shows how to start with this app and use it.

  http://support.HP.com/us-en/document/c01616126

  The other option is the use of the pilot of mobile eprint from your computer. Add a printing device of your pc that actually sends jobs through eprint by clicking Print on the file menu. Using this method, you can print the elements of any application that supports printing, and you have the advantage of being able to specify duplex printing (if supported on your model) and the number of copies. It also means that you won't have to save the file, open an e-mail, attach them to an email and then send it. It is done simply by clicking file, print, and then choosing the printer after the initial installation. The link below you ask your operating system and will then download and manual on how to use the software.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5098101&lang=en&cc=us&TaskID=135&prodSeriesId=5098100&prodTypeId=22744

  If you have any questions post method here is and I would be happy to help.

• Why the printer stop printing when you click Cancel?

  This may belong in the Technet forum, but this is a question that concerns me since the days of Windows 95.

  Sometimes striking impression make you you screwed up in a certain way and to cancel the print job. Enter the printer, right click on the document and hit Cancel usually takes some time, during which the printer keeps printing and waste of ink & paper.
  Why is this? Why doesn't it stop immediately? Why do several PAGES for it to stop? Come to think of it, I can't think of a time casual since I left high school (which uses Mac and Apple printers) when I have not tried to stop a print job to a printer that was not Hewlett-Packard (an HP printer from ""), so I'm not sure if it is exclusive to HP or not. Work used to stop printing almost immediately after order - Macintosh printing, or at least they did with printers ImageWriter and LaswerWriter Mac OS 6.0.8 - 9.1.
  This is not the case with Windows 95 - Windows 7.

  I used to assume it had something to do with the buffer memory of the printer, but a recent incident involving someone accidentally unplugging the computer when the printer was on changed this long assumption based on my experience when I bought a buffer for my printer ImageWriter II return to 1989 or 1990. Printing stopped almost immediately after the computer that it was connected to the lost power (he tried to disconnect a faulty device so that it could be shipped to the manufacturer and pulled the wrong plug).

  This phenomenon embarrassing occurs on several different computers, printers and configurations. School computer laboratories on the areas of small business workgroups to systems of the House with the directly connected printer.

  Hi, SlickRCBD,

  The memory has a lot to do with why this does not block when cancelled.  There may be an older doc who is was filed here.  Unplug the printer from the computer periodically.  Leave that he unplugged for several minutes (5 max), then reconnect.  Remove the cables that connect to the back of the printer for the same amount of time.  This clears the memory.

  Open elevated command prompt

  Enter Net Stop Spooler

  Wait message spooler stopped

  Go to your windows\system32\spool\PRINTERS\ folder

  Search for files ending with. SPL and. SHD created around the time that you were trying to print - delete these files.

  Return to the command prompt window

  Type Net Start Spooler

  You will see message spooler has begun

  Output

  Sometimes the files are hungup.  The above gets rid of them.

• Problem printing Photosmart 3210 using Mac 10.6.4

  When you print a multiple pages of the Word document, print job stops after printing 1 or 2 pages - the printer is paused. What CV selection print printing stops and starts all over again.

  Have the same problem when printing from Excel, PDF, etc.

  Generally, it stops printing after the first page prints and half to the bottom of the second, if it's a file with images, it usually stops a third down on page 1.

  I've updated the latest driver and software for Mac.

  It is possible to scan using the HP scanning application.

  I have a theory that it is a driver problem.

  Does anyone have an idea or a solution to this problem?

  Flemming

  OK, let's try to reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.