Error 512 - fan chassis rear not detected

Similar Questions

• Error code 5005 Keithley 2602 not detected

  Hello

  I use the Keithley 2602 A meter/source in labVIEW2011.

  An error code 5005 product (wholesale value) on the display.

  This error is not detected by the driver.

  In the pilot of the world ErrorQuery maintains False even if an error occurs.

  If I put the case true manually then the error is read back form the instrument.

  I have attached the pilot where the problem occurs.

  Why it is not detected by the driver?

  Kind regards

  Bernard arts

  Hello

  I'found the problem. To initialize the global error query must have the value true otherwise, no errors are detected (playing the instrument).

  The error occurs on the screen of the instrument (if I can see that an error occurs), but it was not detected by the sub vi because to initialize the query of error set to false (the default).

  Kind regards

  Bernard arts

• HP C4280 printer device error: print cartridges missing or not detected

  My printer has message 'Lack of cartridges print or not detected' sometimes it will print fine, sometimes msg appears. I cleaned the cartridges without result.   What should I do?

  Something to try would be to clean the contacts of the cartridge with a pencil eraser. Then it blow out with compressed air.

  I hope this helps.

• Boot failure: REM could not detect 2 hard drives

  Hello. I bought a HP Pavilion G6 series laptop (LX273EA #ABU) last year and he stopped to load correctly. When I click on "Repair (recommended)" I get an error messaqe saying "REM could not detect 2 hard drives. I tried to start in safe mode and it will not work.

  The laptop is two months out of warranty, and the only support option I found is a phone call from £30 with no guarantee of assistance. Any input would be appreciated.

  Thank you

  Michael McDonald

  You are welcome Michaelmcd85.

  The 305 error indicates that the hard drive has failed. You will need to replace the hard drive.

  This is an easy repair so I'll give you the information you need to fix yourself. It's your interview Guide &. It contains information on how to disassemble the laptop. The guide also contains information that will allow you to choose a replacement hard drive.

  If you do not want to repair the laptop you can contact HP Support directly to the 1-800-4474-6836 if you are in the USA / Canada. If you are in another country, you must first visit HP's Support around the world to find the coordinates for your region.

  I hope this information is useful.

• THE ATTENTION! Has not detected one or more drives during POST

  I have a desktop T7400.

  during post, I get this error:

  "WARNING!" Has not detected one or more drives during POST

  Press F1 to continue... »

  I press F1 and it starts up fine, but I have to stop this message from appearing every time that I turn it on.

  I have 1 CD-ROM and 2 sata hardrives on the system.

  I need help please.

  Thank you

  Disable the option 1 SATA in the bios and save the settings. There is nothing connected to the sata port 1.

• my USB is not detected in my pc, but it is detected other pc and laptop. and if I restart my computer at that moment there, it is detected.

  I have lenovo ideapad laptop z580. i5, family basic Windows 7. in the week, I have a problem as "my USB is not detected in my pc, but it is detected other pc and laptop. and if I restart my computer at that moment there, it is detected. "so please give me the solution. Thank you. my email is * address email is removed from the privacy *. Thank you.

  Hello Badodariya Malay,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with pen drive not getting not detected.

  I need to ask you some questions to help you better.

  1. don't you get error message when the USB not detected?

  2. What is the brand and model of the USB?

  Perform the steps in the link and check.

  Tips for solving problems of USB devices 

  Answer to us if you are having problems with the USB key or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• 512-chassis fan not detected

  Hi all

  I h8-1114 office and I put the card mother and hardrive in case Antec 900. I got message from BIOS 'fan of 512-chassis not detected. " From this point, I have to use F1 to start.  I know that this rear fan is no longer connected to the moetherboard. Really, I is not necessary that fan because Antec 900 has a much better fan system. Antec fans are huge and not connected to the motherboard.

  I tried to disable this BIOS message in the BIOS settings, but it seems that there is no option. What should I do to disable this message and start without the use of F1? Thanks a lot if anyone knows.

  ramburak,

  Connect the rear fan on the motherboard or use the left side mount for the original fan option. If you use the rear fan, don't forget to put the fan at maximum speed.

• Update Bios Z400 - now "fan chassis before error 513 not found' I don't have a front Chassis Fan!

  This machine of LOVE and just build one for the gills - power of 600 watts (oem) recently added as well

  Has made updating the BIOS and now it is stuck at the start with 'chassis before 513 error not detected fan' - I can F1 passed and everything is good, but of course I need a fix for this.

  This device does not have a front chassis fan.

  I'm a NEWBIE here and would certainly appreciate some entries.

  Thank you

  David

  Not a windows experience rating bad, huh?

  Such as already reported here, over, do a search for "Ghetto Mod.  There are two main positions for this of me, one for the xw6400 and another for the xw4600.  Your case best fits the xw4600 case, but there is more information about Noctua in the xw6400 post.

  Read both... the answers are all there.

• HP Pavilion 500-164: the printer error HP Pavilion 500:511 - CPU fan not detected

  I have a HP Pavilion 500-164. Every time I start it, I get a 511 - CPU fan not detected error message.

  At the bottom of the screen, it says F1: Boot

  Then he begins to run smoothly. It becomes annoying.

  Examination of the aircraft, but when I find the two fans running?

  What is the problem and what I take in repairs?

  Hello

  Use a can of compressed air to clean any dust from the fans in the PC.  With the side panel, power on the PC and still observe the rotation speed of the fan.  What do you see? slow, medium, or high speed?

  Open the windows to RUN and enter: MSINFO32

  What level of your PC BIOS runs?

  Install the latest diagnostics for your PC. Start your PC and press ESC then F2 to run a diagnostic.  Run a complete set.

• fan not detected

  HP Z800 workstation

  Windows 7 Professional

  error 511 and before error 512 chassis and CPU fan not detected

  It is still in warranty?

  This error message is usually an indicator of a fan or vent. I recommend that you do not use the PC, unless you have checked that the fan is indeed running. If it runs and you still have this error message fan needs to be replaced with a new one.

  If you use your PC with a fan that is not operational, then the CPU will become non-operational for still some time.

• C.P.U fan not detected at boot

  When I turn on my desktop, it says cpu fan not detected & the bottom 'F1 boot' button appears after pressing on which I can log on, I had windows xp on my computer.

  Please tell me how to fix this error...

  Hello.

  Open your computer case and check the fan I have well connected to the motherboard, and it is infact turns when you turn on the computer.

• "Print cartridge missing or not detected" says my Photosmart C4250 of HP all-in-One error

  My all-in-one HP Photosmart C4250 error is 5 years old.

  This week, he stopped printing with a message saying that it could not detect the ink cartridge.  The cartridge was low, but non-empty, so I asked a geek friend to take a look but no problem was found.  Today, I just bought and installed a new cartridge.  Still will not work.

  This printer has been reliable so far.  Any ideas?  I am unemployed and a new printer is certainly NOT in my future.

  Thank you!

  Here a link to a document that addresses the error message that you receive on this printer model. It will provide a troubleshooting to try in an attempt to clear the error message. If we filled all solutions in the document and continue to receive the error message, would seek to substitute.
  
  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us & DLC = in & LC = in & Product = 5061082

• 500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

  Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message.  I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.

  At startup, the cpu fan is not running, but after pressing F1.  Please notify.

  From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.

• Satellite A300D - FN keys and fan not detected

  Hello

  Crashed my HDD (winlogon, MBR, boot,... deleted. Just a disaster), so I have to format the drive and make new instalation of Windows. And it happened Toshiba utility installation. And I can not find the drivers for the FN key. I googled to be called "Utility Flash Cards", but only what I founded is pdf of it. And also my Everest or Notebook hardware control is none of my fans.

  So I ask, where can I find it? Or better... is a place of grand ' ol pack after the new installation of the operating system? Why my fans are not detected by the system? Maybe I just forgot to install a driver. It is quite possible. So, where is a problem?
  And... I'm just curious, y at - there a programe, utillity... etc. which can control the fans?

  I have the Satellite A300D, Windows Vista 32-bit

  Thank you very much!

  Hello

  Can on mate, you can find all the drivers and utilities on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You must install Toshiba Value added Package. That's all that you need for the FN keys. ;)

  But I m wondering about your question about the fan. Why do you think the fan isn't recognized? Everything about the fan will be controlled automatically. You can change only the method of cooling between performance and battery optimized in Windows power management.

• Reading TCP does not detect the network closed conncetion error (66)

  Hi dear all,

  Instead of LAN I use WIFI to connect PC and mobile. Read all communications and write operations are performing ok. But the only problem I am facing is that once I disconnect the network from a mobile phone connection my labview TCP read operation does not detect it and only timesout at the specified interval. Although for Bluetooth connection network if I disconnect mobile then BT read detects it as network conncetion closed in error by peer (66).

  Can someone help me on this.

  Thank you & best regards

  Zdzislaw qureshi

  Hi Zdzislaw,

  The behavior you're seeing is expected for TCP as the device will timeout while it is looking for the connection close the connection.  This Wikipedia article explains how TCP protocol works in relation to a handshaking procedure four lanes running in order to close a TCP connection.  I hope this helps!

  Kim