Error 6 TDMS Open to PDM

Similar Questions

• Cannot open the PDM file with excel 2016

  Hey guys,.

  I have Office 2016, LV 2015 and (I checked my "TDM Excel Add-in" file) the Excel Add-in 2015 of CT.

  I have attached a picture of what I get when I try to open the PDM file with excel.

  So, I found something strange. I checked active supplements under the excel options and the TDM Excel Add-in is listed as inactive (and is called a COM-add-in). I tried to activate it, by checking the box (see the second picture), but that does not change. Interesting is the last line of my second attached photo:

  Translated it means: ' loading behavior: a runtime error occurred when trying to load this Add-In.

  I have 10-64 bit operating system like windows.

  Someone at - it a solution?

  Kind regards

  Slev1n

  
  

• Error-2501 TDMS invalid of the file reference

  Hello. I'm using LabVIEW 2013 for myRIO on Windows 7. Im trying to perform a simulation to the readings of sensors from 0 to 5, then disconnect the data. Ive used the random number generator to get readings. So my code works very well (or almost), as ive used reporting to stop several loops with a stop button. I put not too many timers. I'm using TDMS files to save data. Ive opened a common PDM file in which I want to connect 4 different reading groups. Im getting the error '-2501', 'invalid file reference '... How can I get rid of him? My VI is attached below.

  Thanks in advance

  Hello

  In your attachment VI, you wired 1 'TDMS open' with 4 'TDMS shut. " If none of the "TDMS Close" has been run, the other reference has become invalid 3. This is why you are having error-2501 and this is the expected behavior.

  In fact, 1 'TDMS open' should only be connected to 1 'close TDMS"and make sure that"Close TDMS"is called after all the PDM operation. You can put it in a 'flat sequence Structure"to solve the problem. I modified your VI in the attachment.

  Thank you.

• SE error message cannot open the XPCOM and impossible to open ALL pages

  After loading the updates, I get this error "Couldn't OPEN XCOM" I can't open any programs or emails, does not open Firefox or IE. Have tried the system restore several times without a bit of luck, even that properly ends, begins to tear my hair out now.

  You should not need to use windows, set up of the disks.

  You only need to remove the Firefox program folder to make sure that all files are removed before installig a freshly downloaded version of the Firefox installer.

• I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got an error message cannot open output file. Can you help me please?

  I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got the error message cannot open output file.

  The file can be uploaded incorrectly. Could you it redownload again from http://getfirefox.com?

• Question of TrueSuite of fingerprint - error: could not open impression fingerprint sensor

  Hello

  A few days ago my TrueSuite reinstalled himself and then asked to restart the computer, which I did. But things, when I turned on the computer laptop back to reboot, TrueSuite will have to reboot again. This happened a few times, so I reset the laptop to a system restore point, I had created a few days ago.

  This deleted all my fingerprints, which I don't mind, but when I go to re-register my fingerprints, it says: "error: could not open impression fingerprint sensor.»

  PLEASE HELP ME WITH THIS!

  Thank you.

  See European driver of Toshiba for the most recent software TrueSuite to fingerprints.
  Remove your old software of fingerprint of the computer and reinstall the new software downloaded from the site driver of Toshiba.

  Then set it up again, create fingerprints and take advantage of the laptop.

• TypeError: EM.addUpdateListener is not a function I get this error eveytime I open FF

  TypeError: EM.addUpdateListener is not a function I get this error everytime I open FF I have to click ok every time that has happened before so I took but FF gave him another chance and still the same error

  This has happened

  Each time Firefox opened

  Is immediately

  You have or had an installed extension (MegaUpload toolbar) that changed the user agent of Firefox/3.6.6 Firefox/2.0.0.11.

  You can see the version of Firefox at the top and at the bottom of the window user agent "help > About" (Mac: Firefox > Mozilla Firefox).
  You check (compare), which Web sites: http://whatsmyuseragent.com/ - Whats My User Agent?

  You can check the general.useragent preferences on the topic: config page.
  You can open the topic: config page through the address bar just like you open a Web site.
  Filter: general.useragent
  If general.useragent prefs are "BOLD" (user set), then you can right-click in the prefs and choose reset.

  See also http://kb.mozillazine.org/about:config

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  Same thing here.  Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)

  I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies.  The system cannot find the specified file. "It started after restarting the Windows Update as well.  I imagine that the two are related in the same problem to iCloud.

• fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I found the error of => niincludes.h (18) : fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I checked a few path, "C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2005\VCNET\Include.
  I found a lot of files, but only does not NiVisaComponent.h, anyone know how to download or is this file has changed the name?

  I already install the driver NI-VISA v15.0 but still does not have this file.

  I have not "C:\Program NIUninstaller Instruments\MeasurementStudioVS2005\VCNET\Include" because my laptop is 64-bit.

  Hello

  If you see the file Readme VISA 15, you'll see that Visual Studio 2005 is not supported. It seems that the most recent version of VISA that supports VS 2005 is Version 5.2 for c# / VB.NET and 5.0.2 for MFC C++ (with Measurement Studio 2009).

• 'write on worksheet' VI error: file already open

  I get this error when I write in a CSV file: I save data there permanently... Well, I programmed it stores about 100 points in memory and writes every 100 points.

  When I open the saved file in Notepad for example to preview, Labview returns error "File already open" and so he can't write.

  isn't this weird? aren't you just cached the file when opening information? How can I fix it?

  I use the VI "write on the worksheet.

  Thank you

  Maybe when you get the error, store what you were going to put in this file in memory or a temporary file.  Displays a dialog box that does not stop your program to tell people, don't not to open the file.  When your program detects the file is therefore more open giving the error, and then write about everything that you stored in the memory (or read about in the temp file and write) before adding the latest data to the file.

• Error when you open Add or remove programs: "failed to create value" At Line 451 how this can be corrected?

  Once all updates completed, I now can't add remove programs to work.

  I get the following in a box error message: "failed to create value"at line 451.

  Someone knows how to fix this?

  Hi ZebWebb,

  1. What service pack is installed on the computer?
  2. You have security software installed on the computer?

  If you have recently installed Windows XP SP1 on the computer, then see the article and check if that helps.

  Error when you open Add or remove programs: ' failed 'at line 410' of value creation.

  http://support.Microsoft.com/?kbid=823768

  If you have not installed Service Pack 1 of Windows XP on the computer recently then check if the problem persists in the safe mode and after return details.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• Error message - FILE OPEN ERROR 5

  Get a box -' file error open 5 "once I click it, it comes at the time when I try ot open a file, but it does'nt seem to touch anything. Anyonee know what it is and how to fix it?

  Hi dangilorma,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the question with the error message - FILE OPEN ERROR 5

  Before you start the troubleshooting steps, I need the information required.

  Did you change to the computer?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW