Satellite 1400-503: question of power

Similar Questions

• Replace drive combo 2212 sd - r on the Satellite 1400-503

  Hello world. I have a Satellite 1400-503 through the 2212 mixed sd - r drive that makes the problems on reading and writing of cd and dvd. I want to replace but freezes when I tried to boot the laptop with other devices. The same problem also came with the replacement of the hard disk. When I handed the former parts Notepad starts. I did a bios update without any results. The local representative in Greece (where I live) wants 400 euro to replace the drive. Any suggestions please?

  Thank you George Fazakis

  Hello

  Unfortunately, it is easy not exactly to say why the laptop freezes. Maybe you used unsupported devices. You reinstall the Windows operating system after the replacement of the device?
  If this is not the case, try it.

• Satellite 1400-503 and drive HARD MK8032GAX

  I want to improve my old laptop Satellite S1400-503 with a new HARD drive.
  Originally, she welcomed the 20 GB drive Toshiba MK2018GAS.
  I woul want to buy a new one - Toshiba MK8032GAX 80 GB.
  He would run in my notebook?

  Hello

  You will be very happy if someone can confirm this. I can tell you that you can test. If this HARD drive is not working properly you can return.

• Satellite 1400-503 with a DVD + R problem

  Hello

  I have a problem with my dvd - rom. family have burned me a dvd + R. Now I can't play it on my laptop. So I tested a dvd - R and it works well.

  A friend of mine told me that I can change some configuration of something like that, then I can play both formats. Can someone help me with this?

  Hello

  I don't think that it is a parameter to change. The reader must support the format.

  It's not very often if the machine is not very very new. If you get this problem with the player integrated to your Sat1400-503, and it is not replaced by someone not supported, so I'm very sure that it does not support the DVD + R format.

  BR

  Tom

• Satellite S1000-Z2: Question about power modules.

  This book has been much until now.
  its not used a lot, but just to use it the other day, plugged into the power supply and nothing.
  the Green led is constantly press the ignition button and nothing happens I checked the voltage coming out of the diet that is 19v and that's what I mean. This sound like a new piece on the inside (power module) and if so any easy idea how would be for me to change and the cost?

  Thanks for your help
  who is Jason

  Hello

  Well, it's not easy to say what part has a malfunction. As far as I know that the motherboard has a delicate electronic power supply. You must be an expert to resolve this problem. I suggest you contact the service partner because they have more experience in these cases.
  On the Toshiba site, you can find the right ASP.

  Good bye

• Satellite 1400-503-fire flashing orange

  Hello

  I decided to try to fix my old laptop, but I'm stuck on something.
  When I'm trying to turn the machine on, it flashes right in the following order of morse code:

  -long =
  . short =

  *. - . . - - - .*

  That could possibly say? I really don't want to not spend money fix at some point of service. Suggestions?

  Hi qtong,

  This means that your mobile doesn t start more, you get only this blink code, right?

  Well, in this case, it seems to be a serious hardware problem and only an authorized service provider can help you because they have special tools to check what this flashing code means.

  For now, I guess it has something to do with the motherboard itself but that of just my personal opinion.
  Motherboard Exchange is really expensive, as you probably know, so I doubt that it would be useful to fix

• Satellite 1400-503: what kind of RAM should I use?

  It is pre-installed with 256 MB of RAM (I think) and I would like to enhance it with additional 256 MB in the free location. What kind of RAM I need? the preinstalled is a samsung with the inscriptions on it: Korea 0228 pc133s-333-542-81 L7A M46453254CT

  Hello

  I want to clarify that you can upgrade the memory to 1024 MB.
  As far as I know Toshiba recommend using these memory modules:
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)
  PC133 128 MB (PA3085U - 1 M 12)

  But as you mentioned the laptop supports modules SODIMM 144 pin PC133 .
  In this case, you use modules with these properties.
  But I prefer the modules Kingston or Toshiba. You know that no names module performance is not very good.

• I need driver modem satellite 1400-503

  I format my PC operator and I lost two drivers, modem and sound.
  Hope to help me to found.

  Hello

  I'm sure I can help you ;)

  Have you received the CD tools & utilities with your laptop?
  Yes, I did. Done on this CD, you should find the necessary drivers.

  Of course, you can also try to download the drivers from the web form.
  Visit the Toshiba page and select the correct drivers in the form.

• Satellite S1400-503: 16-bit or 32-bit Cardbus type?

  Hi all
  my PC Satellite S1400-503 (INTEL Celeron 1.33 GHz) has two PCMCIA slots: they are "16-bit" or "32-bit" Cardbus type? Are there commands through which I can get this information in the PC?

  I ask this because I bought a card D - Link USB-2 must be used in a PCMCIA location and use it with a scanner (Canoscan 8400F) it seems that the data transfer speed is not very good: in fact, the scanner works by intermittent, stop and restart several times in order to transmit the image it seized in pieces; so, it looks like a problem of speed in data transfer and bandwidth of the PCMCIA slot may be involved in this.

  Thanks in advance. Hefte - Bologna - Italy

  Hello

  CardBus 32-bit is the satellite 1400-503/PC-Card supported 16-Bit interface and you can use two cards PCMCIA Type II or a PCMCIA card type-III.

• After a minute to the power of the battery turns off my Satellite 1400

  Hello! I need your help! Whenever I go to the power of the battery, all of a sudden, a minute later, my laptop turns off without reason! The battery is fully charged. What do you think is the problem? My laptop is 4 years old.
  It is a Satellite 1400.
  Thank you very much!

  Hi Krissy

  In my opinion, everything that happens has a reason any. From your description, I think that the battery is at the end and should be replaced.

  It may be that the battery is full, but there is not enough power. I have a similar problem with Tecra 9000. Unit is also about 4 years. On battery it maybe rolls 10 minutes but after that this time he switched down suddenly.

• Satellite 1400-553; Is it possible to USB 2.0

  Hello

  I have a question:
  My PC using the USB 1.0 port. It is possible to use 2.0?
  Ther's some update to do?

  Thank you!
  Luigi

  The pc's Toshiba: Satellite 1400-553 s

  You are right.
  The Satellite 1400-553 s (PS140X) seems to support the USB 1.1 version

  But it also seems that the Satellite 1400-553 s supports a PCMCIA slot.
  You can use the PCMCIA (Cardbus 32-bit) and PC - card 16 - bit cards.
  There should be a space for 2 cards PCMCIA Type II or 1 Type III card

  To my knowledge, there are some PCMCIA cards with USB 2.0 ports.
  Therefore, it would be possible to use this card to get the USB 2.0 capacity

• Help! Satellite 5100 - 503 has stopped working!

  Hello!
  I have a Satellite 5100 503 and was really satisfied until yesterday.
  Now it has stopped working.
  What I did: closed the laptop after work (everything is ok) and it only stems for a while. When I opened the laptop again to continue working, nothing happened.
  Only the small frontdisplay showed me a spinning CD (no CD inserted) and battery light. After pressing the button on the sur-signe appeared, but nothing happened again. By pressing the button again (a few seconds), do go away on-sign. No display, no fan, no noise of hard disk in any case (ono/stop). Insert an audio CD and works by pessing the play button! Soundsystem works well.

  Does anyone have an idea what could be the problem?
  questions? more info needed? Thanks for asking!

  Help, please
  Günther

  Hello Guenther,

  have you tried to remove the battery for about 5 to 10 minutes! It seems that the laptop is unable to start the file hibernation to start windows. You can also try to push the button to start for 5 seconds.

  Theo Cu

• Memory maximum satellite 1400-103?

  According
  [Satellite 1400-103 specifications: OD = 1 http://be.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=18117&DISC_M & LNG = 10 & service = BE]

  Satellite 1400-103 has a maximum 1024 MB memory (2 slots of 512 MB)
  512 MB is the maximum memory, which you can buy online for this laptop.

  But when I click on 'options' of this laptop,
  I see a memory card of 1 GB is available

  So the question is:
  Is it possible to fill these 2 housing with 2 x 1 GB?
  Where do I go for a maximum of 2 x 512MB?

  Thanks in advance

  I doubt that 2 x 1 GB is possible in this notebook, and as far as I know the maximum RAM capacity is 1 GB.

  The best is improve you it 1 GB max. with 2 x 512 MB.
  The specifications are SDRAM PC133 and the reference is PA3108U - 1 M 51.

• Satellite 1400-104 crashes after the MBR softwarepackage

  Hello

  It is of a Toshiba Satellite 1400-103 (512 MB of memory). On startup, the Satellite works very well, no problems with surfin or broadcast, but when I run a main softwarepackage (such as Macromedia Dreamweaver or MS Word Excel), the PC freezes after a minute or two.
  I feel that the fan suddenly starts turning and the computer crashes. The only thing I can do is turn off taking the startbutton about 10 seconds, then turn it back on.
  I have already reinstalled Windows XP, but the same problem occurs after two weeks. My Antivirusprogramm works very well and I check every week on spyware and software malware.
  Does anyone have an idea about this problem?

  Thank you

  Hi emoreau

  Can you please tell me if there is the same problem without using this software package?

  The cooling fan usually begins to work if the processor speed increases and run under full power. Is this software that you use a complex and superior application?

• Sat. 1400-503, SD-R2102 drive: IDE ERROR #1, cont.

  Hello.
  Therefore, even after the firmware update (1400-503 drive, SAT SD-R2102). Original firmware was 1316, after changing to 1W16, an error message is displayed. The firmware update program cannot return to the previous state, bcs is displaying the message: not found disk ATAPI. Can anyone help?

  Hello

  Just for Info:

  The first two letters are important... They represent 'the family' as 10XX, 13XX and 17XX are Toshiba original firmware. 1QXX are Compaq. 1DXX are Dell and so on...

  Finally, two are actually version. The more means more new version. But they are the exceptions a...

  You should never Flash your drive with the firmware of different 'family '. By example, if your firmware is currently 1015 should never flash at 1 Q 24 since your disk may not work more after the blink...

  Good bye