Error 720 when connecting to the vpn.
Tags: ThinkPad Notebooks
Similar Questions
-
"Error 720: a connection to the remote computer could not be established.
Earlier, it was working fine. One day it stopped working. I don't write my windows key and the serial number of HP for reasons of confidentiality, but it is authentic.
I use Windows 7 Home Premium on my laptop HP bought 4 months ago. While trying to connect to internet through my USB data card (I use Auntie Photon +) I get an error message "error 720: a connection to the remote computer could not be established. When I connect the same device to another laptop, it works fine. The USB card company suggests that it is a matter of TCP/IP and I need my OS resintall. I don't have any CD of windows with my HP laptop. I tried to restore my machine, but that did not help. Please help me.
Hello
Do the methods and check if this solves the problem.
Method 1: Try to run the network troubleshooter, check the link for more information on the same.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method2: You can try the steps outlined in the article and check if this gives a probable solution.
"Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer
http://support.Microsoft.com/kb/956196
Reset Internet Explorer WARNING:
Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.I hope this helps.
-
When you try to convert a word document I get "an error occurred when connecting to the service. "Please try again later".
Hello
We apologize for the inconvenience. The site is under maintenance at the moment, the concern team strives to resume the services soon.
Kind regards
Christian
-
Default gateway when connected to the VPN
Thanks for reading!
It is probably a dump so bear with me the question...
I set up a VPN connection with a Cisco ASA 5505 giving over the internet, with customers behind him (on the same subnet), when environmental connected ot the VPN I can reach the router inside giving me and the other pass behind the router (each switch is connected to the router), but nothing else.
My beets is that the router is to play with my connection, but nevermind that!, Setup is not complete when even... my question is more related to the bridge I'm missing when I'm outside, is connected to VPN on the ASA, pourrait this BUMBLE? I would not a Standard gateway in the command ipconfig settings in windows?
That's who it looks like now:
Anslutningsspecifika-DNS suffix. : VPNOFFICE
IP-adress...: 10.10.10.1
Natmask...: 255.255.255.0.
Standard-gateway...:
The internal network is:
172.16.12.0 255.255.255.0
Here is my config for the SAA, thank you very much!
! FlASH PA ROUTING FRAN VISSTE
! asa841 - k8.bin
!
DRAKENSBERG hostname
domain default.domain.invalid
activate the password XXXXXXX
names of
!
interface Vlan1
nameif inside
security-level 100
IP 172.16.12.4 255.255.255.0
!
interface Vlan10
nameif outside
security-level 0
IP 97.XX. XX.20 255.255.255.248
!
interface Ethernet0/0
switchport access vlan 10
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone THATS 1
clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
DNS server-group DefaultDNS
domain default.domain.invalid
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
172.16.12.0 IP Access-list extended sheep 255.255.255.0 allow 10.10.10.0 255.255.255.0
MSS_EXCEEDED_ACL list extended access permitted tcp a whole
Note to access VPN-SPLIT-TUNNEL VPN TUNNEL from SPLIT list
standard of TUNNEL VPN-SPLIT-access list permits 172.16.12.0 255.255.255.0
!
map-TCP MSS - map
allow to exceed-mss
!
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer to 8192
notifications of recording console
logging buffered stored notifications
notifications of logging asdm
Within 1500 MTU
Outside 1500 MTU
mask pool local 10.10.10.1 - 10.10.10.40 VPN IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm-625 - 53.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 172.16.12.0 255.255.255.0
Route outside 0.0.0.0 0.0.0.0 97.XX. XX.17 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 172.16.12.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 172.16.12.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
!
a basic threat threat detection
Statistics-list of access threat detection
internal VPNOFFICE group policy
VPNOFFICE group policy attributes
value of server DNS 215.122.145.18
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value TUNNEL VPN-SPLIT
value by default-field VPNOFFICE
Split-dns value 215.122.145.18
no method of MSIE-proxy-proxy
username password admin privilege 15 XXXXXX
username privilege XXXXX Daniel password 0
username Daniel attributes
VPN-group-policy VPNOFFICE
type tunnel-group VPNOFFICE remote access
attributes global-tunnel-group VPNOFFICE
VPN address pool
Group Policy - by default-VPNOFFICE
IPSec-attributes tunnel-group VPNOFFICE
pre-shared key XXXXXXXXXX
!
class-map MSS_EXCEEDED_MAP
corresponds to the MSS_EXCEEDED_ACL access list
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp error
inspect the pptp
inspect the amp-ipsec
inspect the icmp
class MSS_EXCEEDED_MAP
advanced connection options MSS-map
!
global service-policy global_policy
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
Cryptochecksum:aaa1f198bf3fbf223719e7920273dc2e
: end
Right if disbaled all traffic will pass tunnel and snack active local internet gateway is used specific traffic wil go to the tunnel.
-
Cannot send emails from gmail or yahoo when connected to the vpn
I use a vpn to hide my IP address. When I am connected via my VPN I can't send emails from my gmail or yahoo accounts in thunderbird
If I disconect vpn, they go through the fineThanks for the suggestion, I've changed the security of connection for STARTTLS
and they work -
E3000 resets occasionally wired port when connecting to the VPN PPTP using Windows 7.
I've had an E3000 for a few months now and a couple of times per week that the router loses wired Ethernet connectivity while PPTP VPN connects via Windows 7. The router does not actually resets itself... but darkens light of wired connection, the computer establishing VPN, and connectivity to the router is lost. Within 30 to 45 seconds, the port becomes active, once more, and to establish the VPN connection. I've not seen this on a wireless connection, but I do not often, which may be why. Similarly, I have not seen this on my Vista or XP wired computers using the Windows VPN client... but then again I can't use them often enough to meet the problem.
I see this mostly on my Windows 7 (x 64) SP1, it also appeared pre - SP1, development equipped PC IP6 disabled on the PPTP VPN. And I don't see that on the establishment of a connection... once the connection has been made I can be operational for hours (5/6 or more a day) with no issue.
While this issue causes me all real headaches like this doesn't happen on the connection... I thought someone should know.
abandoned,
Gave to your suggestion to try, but did nothing to eliminate the problem. The router was already on the version the most recent but re-flashed in any case. I ran 3 days on an old Windows XP machine connected to a different port on the router, I had 3 days to do work, and I've never had the drop on the VPN port. But this morning back on my Windows 7 machine... the port fell during my first attempt... I then had no problem, the rest of the day. Despite her disconnect and reconnect a PPTP VPN a few times more. Go figure.
Let's consider this resolved... as I don't want to lose too much everyones time hassling with something that seems to be minor. Thanks for the help!
-
Access to the external network when connected to the VPN
I have a 5505 I successfully install an IPSEC connection to. It uses NT to Active Directory authentication to authenticate. After I log in, I can access everything on the remote network (internal). I can't access anything on the internet.
Nothing behind the ASA can access internet, vpn clients that cannot come back on.
Syslog messages show buiding vpn clients to the top and down the ICMP connections if they try to do a ping to the outside, but they are not answered.
I know it's most likely a statement ACL or NAT that I am out of ideas?
config attacched
You have 2 options.
Split tunneling, unencrypted access to internet.
Public Internet on a stick, integrated internet traffic to ASA and back on.
permit same-security-traffic intra-interface
Global 1 interface (outside)
NAT (outside) 1
-
requiring a client firewall be present when connecting to the VPN
Is there a way to set the firewall need a group, as it is present to a concentrator vpn to connect vpn through a PIX, customers or is that the game buy a hub of additional features allows you to?
Thank you
Bill
go to configuration group policy for the policy that you are wanting to change and use the command below.
client-firewall-fire [opt | req | none]
-
Cannot access Internet when connected to the VPN
I have mobile users using the Cisco VPN (4.0.5B) connection to a 837 customer. They can connect and access resources network in-house/remote ok. However, they are unable to access the Internet at the same time. I also had this problem where some users were connecting in a PIX, but managed to settle only by using the vpngroup
tunnel of splitting and appropriate ACL commands. All I can find on the Cisco site is that it is possible by specifying an ACL, bit I don't know where to specify them this and that. Thank you. Here are examples of code,
access-list 100 permit ip<837 inside="" net=""><837 inside="" net="" mask="">
ISAKMP crypto client configuration group ciscovpn
key cisco123
pool vpnpool
ACL 100
837>837> -
Lose the internet while connected to the VPN
I've seen quite a few threads of not being able to connect to internet when connected to the VPN. I tried to follow but have not be able to follow. I connect to the VPN via IE (that is connected by using Check Point). How can I go about it?
That's the problem of split tunnel. In general, the VPN tunnel can be configured on the client side (as the native client VPN PPTP in Windows for example) or side Server (like OpenVPN for example) to force all traffic through the VPN tunnel or not. If all the traffic is forced through the VPN tunnel, which is what your description, internet access is controlled by the VPN server. It is a safety precaution to isolate the network side server from your local network.
I would check with your network/VPN to help admins simply because may fall you on a server-side config that may or may not be changed according to their network security protocols.
-
Get 810 error message when you try to connect to the VPN using L2TP protocol
Original title: L2TP will not let me connect.
I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests). All are not updated, but the PPTP, IKEv2 work without problem. The second server that has the CAs and RRAS is a member of the AD - DC server. The Win7 is not on the domain and I have Win7 a client certificate. I have ensured that the CA root of trust is in the user store and computer Trusted Root CA. I have also ensured that the Win7 client certificate is in the user store and personal computer. I get a 810 error message when I try to connect to the VPN using the L2TP protocol. I have exhaustively studied this problem and I can't find a solution to this problem. I also raise the functional level of the domain to 2K8R2.
I think this should be a simple and easy solution, but where can I find the answer?Please help me.Thank you for your time.Allan.Hi Allan,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:
http://social.technet.Microsoft.com/forums/en/category/w7itpro
If you need any other assistance, let know us and we would be happy to help you.
-
original title: connection to the VPN
While trying to connect to the VPN Windows, I get an error 868. What it means. The address of the server I used was 68.28.195.137. Help, please.
Vijay Kapnadak
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro
-
problems of the DRC of vista for windows machine 7
I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server." Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.
can someone shed light on this please?
Hello
Temporarily disable the security software on both computers and check if it makes a difference.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
-
I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,
Hi Rajendra Patil,
I suggest you to ask your question on the TechNet Forums.
Windows Virtual PC and XP Mode.
http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads
I hope this helps!
-
When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet. I have a VPN connection and it works but not navigation parallel to the point where the VPN works.
Someone suggested this fix >
Make sure that the default route has NOT changed to the VPN server.
Open the properties of your VPN connection.
Go to 'network '. Double click on TCP/IP protocol. Use the button "Advanced".
Disable the feature from default gateway.
but when I do that so I'm not able to access our data HTML site that requires the use of VPN.
Any help is appreciated
This article describes what you see...
http://TechNet.Microsoft.com/en-us/library/bb878117.aspx
.. .and possible solutions...
I suggest you post this question in the TechNet Windows 7 IT Pro networking forum can help...
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Maybe you are looking for
-
think I found a bug in this driver and I wanted to get confirmation. (Here's the link to the driver page, to help locate the driver): ( http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=74D1F1D4EB5268E8E04400144FB7D2...) The VI i
-
My speech recognition is not always where it should, when I say the forbidden command.
My speech recognition is not always where it should, when I say the forbidden command. In addition, what to do when you want to type "page 1" and instead, he puts a number 1 on the document page. Help! Thank you very much! Mary
-
Set up the date and time on a HP Officejet Pro 8600 more
How do you set up the date and time on an Officejet Pro 8600 more? I'm going to fax setting, and then there is a dispute of options: Resolutions Lighter or darker Send the original documents by fax Set as new default values Fax set up but nothing on
-
I tried the cloud, but the internet where I live in the Brazil is too slow. I want to download Light room but the as I am to the Brazil he keeps switching to Portuguese. I want it in English
-
How can I move in another photo?
How can I move into another image? >