Lose the internet while connected to the VPN

Similar Questions

• Unable to browse the internet while connected to the VPN

  Hi all..

  It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

  Thank you...

  Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?

• Unable to connect to the Internet after connecting to a VPN server.

  As soon as I connect to the VPN, I can't access the Web or e-mail.

  An article published by Microsoft Support to http://support.microsoft.com/kb/317025 seems to refer to the same problem. However, it is for Win 2000 and NT platforms, not XP. The problem seems to be due to the VPN connection (being configured) to use the default gateway on the remote network.

  Issues related to the:

  1. The problem indeed because the VPN connection is configured to use the default gateway on the remote network?
  2. If so, a) how can I know if it's like my VPN connection is configured and b) how I set up so I can use VPN to the network remotely and still being able to use internet locally?

  Thank you.

  Realize that the VPN is intended to establish a secure connection to a remote network via a public internet.  Allowing a client computer at the same time secure access that a secure network and a public network may pose a risk to data leaks out of the network security in the public internet.  If "split tunneling" VPN server controls is allowed on a client computer.  If allowed by the side of the VPN server, the client computer accesses the VPN and the internet by unchecking the 'use Gateway on the remote network' box.  For more information:

  "Split Tunneling for concurrent access to the Internet and an Intranet"
    <>http://TechNet.Microsoft.com/en-us/library/bb878117.aspx >

  HTH,
  JW

• Cannot access internet while connected to wifi (mini ipad)

  My ipad cannot access the internet (including safari and different applications) while connected to wifi.

  Please answer if you know what happened to my mini ipad.

• Lose the internet connection in between while trying to browse online

  Original title: lost session?

  I don't know anything about computers! I work from home so I have my work here computer and my laptop.

  When I'm working, I regularly lose connection and my screen go black and then he says: "session lost."

  I have to disconnect from the internet and wait about 30 seconds and reconnect on/again.  I also lose the

  connection on my laptop when this happens.

  I have AT & T service and a Cisco router.

  What is an outside source that makes me lose my connection?

  Thank you!

  Hello

  1. using a wireless or a wired internet connection?

  2. you receive a specific error message/code when you lose the network connection?

  3 did you change on your computer before the show?

  According to the description of your problem has been the issue is not specific to a single computer, because you lose the connection to both of your computers at the same time. Keeping this in mind I recommend you contact AT & T by clicking the link http://www.att.com/esupport/

  If AT & T guide you indicating that the problem is with your computer, you can then follow the steps mentioned below:

  Method 1:

  Step 1: Perform a safe mode with networking

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Many network connection problems are caused by hardware that is not configured correctly. Here is some information on how to check your cables, check or reset your modem and check for problems with your network adapter

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  Method 4:

  When you run the network troubleshooter utility, any problem found, along with any solution, appears in the dialog of the resolution of network issues. If it has more detailed or technical information about the problem and possible solutions, it is saved in one or more event logs

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  It could be useful!

• Problem WiFi on Satellite Pro C660-2TQ - lose the internet connection

  Hey people,

  hope you could help me. I did a new clean install of Win7 (32 bit) on my Toshiba Sat, C660-2TQ.

  His job very well, except one thing:
  the adapter Realtek RTL8188CE-in my laptop is just terrible...

  I installed the latest driver for this Home Premium wifi, but I lose the conn. to the internet all the time.
  While I have to disconnect in the bottom right corner my laptop and connect again manually.
  I have to do this every minute or so and its very annoying.

  I saw read several discussions about the problems with this specific wifi adapter, but no solution has helped me...

  I didn't install all the listed drivers (34 available for me) but then what I Normand to update my BIOS or would it be a driver as the driver for the touchpad is necessary to get my wifi working properly?

  Hope you guys could help me...

  honestly desperate

  cordially :)

  Hello

  WiFi disconnection problems have different causes and its not easy to say why it happens.
  So, you will need to check each step and each option.

  First of all, you will get the latest version of the driver for this adapter WLan on the Realtek driver page:
  [Download driver Realtek RTL8188CE | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  Would recommend that you do not install this driver.
  Before you begin with the installation, uninstall the previous driver.

  Secondly: it would be possible that this issue isn't related WLan driver and update the driver wouldn't help you much. In this case you should check the other parameters.
  I recommend you to check the router settings and test different standards WLan (802.11 B / G or N).

  In many cases, the problems of compatibility between the router and wireless network card could lead to similar to your question.
  Of course, you should also go to Device Manager-> card WLan-> properties-> Advanced tab
  and must check if you can switch between the WLan standards singles (802.11 B / G or N)
  Power management also in tab (last tab) you must unselect the option to turn off the device to save power.

• Satellite C660-28V - lose the internet connection

  I have two satellite C660-28V.

  Problem is that I lose the internet connection on a frequent basis. I have to reset the modem for internet connection back once again. This problem I have with these two laptops from Toshiba.

  I also own another laptop (Dell) and a local network connected PC: no problem with these.

  Have you noticed this problem with the modem connection only?
  LAN and WLAN connections work properly?

• I try to get an update of the software update, but he kept saying ' this phone (Iphone 5 s) is not onger connected to the internet while I am using internet.» Please help me understand why.

  I'm trying to get a software update IOS 9.3 as reminded me. He repeated that "impossible because you are no longer connected to the internet while I am on the internet. Please help me understand why. I did it many times, but it's really annoying

  The iOS 9.3 update was pulled for iPhone 5s and older iPhones because of activation problems. He will be unavailable for the next few days.

• iMac loses the internet connection when I turn off wifi

  Any help appreciated! I'm not very computer savy! Can my grandson tell me (how) on some things.

  I lose the internet connection when wifi is disabled. It will happen when using any browser, Firefox-Safari-Google Chrome.

  Desktop computer is connected to the modem.

  Model name: iMac

  Processor name: Intel Core i7

  Processor speed: 3.4 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 4 GB

  Any ideas? Thank you

  You can use an ethernet cable between the modem (= the internet connector) and the iMac.

  WiFi is like an invisible computer thread worms (among others) the modem. When you switch WiFi off, your computer cannot reach the modem and so there is no internet on your computer.

• How can I connect to my server (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?

  Hello

  How can I connect to my sServer (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?
  

  Hello Marie Smith.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.

• While trying to connect to the VPN Windows, I get an error 868. What does that mean?

  original title: connection to the VPN

  While trying to connect to the VPN Windows, I get an error 868. What it means. The address of the server I used was 68.28.195.137. Help, please.

  Vijay Kapnadak

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• Installed Layered Service Provider (LSP) is defective, lose the internet connection

  One of my computers lose the ability to connect to the internet once a day or two.  When this happens, I can not connect through broadband or modem.  Usually, he regains the connection after an hour or two.  It also includes the connection when I restart the computer.  The problem started after about a year of use on this computer.  The computer is a Toshiba Satellite A215-S4757 with Vista Home Premium, Version 6.0 (Build 6000).  Other computers do not have this problem.
   
  Windows Network Diagnostics displays the message:
   
  A required network component is not working properly on this computer
   
  A provider bunk (LSP) installed is defective.
   
  Remove the defective network component
   
  I have thoughts on what is causing the problem and how to fix it.

  
  

  ICS internet connection sharing. A computer connects to the internet and
  others connect to the computer first. ICF (Internet Connection Firewall)
  protects against intrusions.
   
  http://support.Microsoft.com/kb/811259
   
  Manual steps to recover from Winsock2 corruption for Windows Vista users
  Winsock corruption can cause connectivity problems. To solve this problem by
  using Diagnostics of the network in Windows Vista, follow these steps:
  1. click on start and then click Network.
  2. click on network and sharing Center.
  3. in the network and sharing Center, click on diagnose and repair.
  Note You can also access the network and sharing Center in Control Panel.
   
   
  Reset Winsock for Windows Vista
  To reset Winsock for Windows Vista, follow these steps:
  1. Click Start, type cmd in the start search box, right-click on cmd.exe,.
  Click on run as administrator and press to continue.
  2 type netsh winsock reset at the command prompt and press ENTER.
   
  Note If the command is correctly entered, you will receive an error
  Message. Retype the command. When the command is executed successfully,
  an e-mail confirmation will appear, followed by a new command prompt. Then, go to step
  3.
  3. Type exit and press ENTER.
   
   
  --
  ..
  --
  "wuverton" wrote in message news: 19cb1db0-a9f8-493-a332-8725d 6165869...
  > I found a temporary solution. It seems that the Internet (ICS) connection Service
  > the origin of the problem. When I stop this service, I immediately
  > again to the Internet. If I take ICS, I lose the connection. ICS
  > restarts when I reboot, so the solution is temporary.
  >
  > Among other things, ICS provides intrusion prevention services. Is it
  > blocking of the Internet to stop trespassing?
  >
  > It is sure to have turned off ICS? If not, how can I permanently fix ICS as well
  > just to stop my internet connection.
  >
   
   

• Vista 32 bit loses the internet connection after about 10-15 minutes.

  I lose my internet connection after 10-15 minutes.

  The message says local access only.

  The only way to reconnect is to restart the computer.

  I use a devolo home plug network system. It is connected to a 210 of BT router travel.

  I also have a new computer recently bought and installed Windows 7. There is no problem with that.

  Maybe it's a coincidence, but the problem started only since the installation of the new model.

  
  

  Hello Cody C.

  Thanks for your reply. I tried this. It is said that the drivers are up to date.

  I go into the settings of power network and checked the box "turn off network card to save energy.

  Since that seems to be OK. Only time will tell if.

  Thanks a lot for all the replies. EXTED

• can the Internet, have the vpn connection

  can the Internet, have the vpn connection using nat

  can the Internet, have the vpn connection using nat

  Yes, it can.

• You cannot connect to the Internet after connect you to a VPN server

  I have the same problem as described in http://support.microsoft.com/kb/317025/en-us
  In my case I am connected to the VPN (PPTP), which is implemented on a router (so no need for a computer is always on). When connecting to the VPN using the "connect to a network" in the network and sharing Center, my all internet traffic through the VPN. Instead, I need just to some programs to connect via VPN.
  Does anyone have a solution for Win7 Pro 64-bit?

  See you soon.

  Hi Zagato,

  The question you posted would be better suited to the TechNet community. Send the query in the link.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps.