Error 80004005

Similar Questions

• TestStand 2013 error 80004005

  For some reason any, whenever I try to run the sequence editor I get a "system-level Exception" followed by "creating an instance of the COM CLSID {(B2794EF6-C0B6-11d) - 939 C-0020AF68E893 component witch} IClassFactory failed due to the following error: 80004005"

  I followed the patches published, including deleting stationglobals.ini, running 'Selector of Version' etc almost nothing works. The exception is that, after a PC restart, it will work, but very slowly; the sequence editor closing and restarting it brings error 80004005.

  I also tried to uninstall and re - install TestStand as well as complete re-installtion of 2014 DS.

  Short of re-formatting my hard drive and to go back I don't know what I can do.

  Any suggestions would be most welcome.

  Keith

  
  

• Error '80004005', an Exception occurred in the Microsoft JET Database Engine

  Hello

  I use Microsoft Jet 4.0 OLE DB Provider for storage in the database file Microsoft 2000 (.mdb file) for the past two months with no problems, now I get the error '80004005', of Exception occurred in the Microsoft JET Database Engine: could not open the database. It may not be a database that your application recognizes, or the file may be corrupt. I study some forums but could not get a definitive answer as to why this might be happening.

  Please, help me to understand this error so that I can avoid losing data in the future.

  Thank you

  Guilhem

  It is impossible to say when the problem occurred, but as Dennis said that Jet is not a robust database. It falls particularly in situations where is is called to manage large sets of data or be accessible from multiple users at the same time.

  In terms of alternatives, they are many if you want to go this route.

  Mike...

• Format XP Microsoft JET Database Engine error 80004005 unrecognized database would be...-

  XP Microsoft JET Database Engine error '80004005' Unrecognized database format would be... -Is a message I get. Don't know how to fix it?

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. He would be grateful if you could answer a few questions to refine the question.

  1. Once you get this error?

  2. are you aware of changes to the computer before the show?

  3. you use ActiveX Data Objects (ADO) or ODBC to connect to a Microsoft Access database?

  4. This error occurs when you run a specific program or out of order?

  5 are logged as administrator?

  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
   
  See this link for more information on:
   
  http://support.Microsoft.com/kb/555375

  Provide more information about the issue so that we can help you.

• Error 80004005 When coding Movie 1

  Anyone know how to fix error 80004005? I am using Roxio creator and this error keeps coming back.

  In terms of software programmer 0 x 80004005 means E_FAIL. It's a pretty generic error code, as you can see that it can be used in any kind of error.

  I suggest you contact customer support from Roxio, there are not a lot of Microsoft or anyone outside Roxio can do to solve this error code.

• Cannot install windows update, error: 80004005

  Original title: Update security for Windows Vista (KB978338)

  I have Windows Vista installed on Dell Inspiron 1420 laptop, which, as Ms security essential, installed, for the last 6 months, I get automatic updates automatically prompts for the security update, the installation it gets restarted and it will once more be restored that updates are not configured correctly. I have tried every thing but no lack of use that I tried to fix with Microsoft DrFixit even then I'm having the same problem, error code 80004005, I tired to get help, but the customer support phone number does not work. .

  Error details:

  Security update for Windows Vista (KB978338) error 80004005 code, I tired to get help, but the customer support telephone number does not

  As well as the above problem I am facing problems Fast Ethernet Broadcom NetLink and HUAWEI Mobile Connect Dirver, for which I am not able to install drivers correctly.

  Hello

  1. are you able to install some other updates?

  2. what exactly happens when you try to install the drivers?

  3. are you an error message when you connect to the Internet via Ethernet?

  4. don't you make changes to the computer until the problem occurred?

  Method 1 :

  Set up your computer in a clean boot state and then try to install the updates.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2 : If the problem persists, then try to download and install the updates manually using the link below.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8039

  Method 3: Update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Method 4: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For your reference: How and when to contact Microsoft and Support Customer Service: http://support.microsoft.com/kb/295539

  Hope this information is useful.

• Latest version of KB905866 will install not (error 80004005) automatically or manually

  Latest version of KB905866 will install not (error 80004005) automatically or manually.  I tried the regular and most aggressive FixIt for updates.  I also tried to do nothing works safe mode.  I also tried to block the startup applications and tried all th eproceures again no no is made.  At one point my event log indicated that this update is not supported with this computer (not the event log regular I received after most of the trials).  Any other ideas?  I am running Windows Vista Ultimate 32)

  0x80004005= unknown error - can occur due to programs/services to interfere in the background.

  Suggestion-

  • Do a clean boot and try to reinstall the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  • Download the update manually and install it in a clean boot state.
   

• Direct Mail 0 error 80004005 x prevents the reception of e-mail. What is the solution?

  Direct Mail 0 error 80004005 x prevents the reception of e-mail. What is the solution?

  Hello

  The question you have posted is related to Windows Live mail. This is why it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/forums.aspx?ProductID=15

  http://www.windowslivehelp.com/

• HndlErr.ErrorIn error '80004005' in the Windows Vista computer error code.

  Original title: error code.

  I can't go to my schedule for my work, I get this error HndlErr.ErrorIn error '80004005' code. Nobody knows howtofix he?

  Thanks for replying or trying so quickly. The problem has some how fixed it's self. I went to the info you requested and was able to make my schedule. The next time this happens I have copy the complete error message. Thanks again

• Cannot install Windows 10, error 80004005

  Hello

  I wanted to upgrade to 10 on my laptop Sony Vayo windows, but I get this error 80004005. I tried everything that mentioned on the forums, as restarting the service boot update, disable windows firewall. It does not work.

  Can someone help me please?

  Hello

  I suggest you read these information published the year last of Sony on non Windows 10 upgrade until what you check on their Web site.

  http://eSupport.Sony.com/us/p/os10upgrade.pl

  Support for Sony for Windows 10 will vary according to the model

  Sony is about to provide information on our program of Windows 10 upgrade for supported VAIO models. Please see the attached press release below for upgrade information, drivers / applications and upgrade instructions.

  Calendar of 10 Windows drivers

  We are testing of supported models and will provide the results as soon as possible. We have the intention to publish information upgrade Windows 10 and for the Windows 8 and 8.1 models, drivers, applications and detailed information on the calendar below based on the operating system installed initially on the PC.

  Drivers/Applications and setting Instructions

  Original PC operating system	Update of information	Upgrade instructions & drivers / Applications
  Windows preinstalled 8.1	August 2015	October 2015
  Windows 8 preinstalled	August 2015	November 2015

  Information about the limitations and problems

  Original PC operating system	Update of information
  Windows 7 SP1 preinstalled	August 2015

  IMPORTANT: Bookmark this page and check back here before upgrading to Windows 10 for the latest information for your model of VAIO PCs.

  See you soon.

• Solved: Problems with CLR Error: 80004005

  I get the CLR error: 80004005 When I boot in Windows 7. It happens when some programs start during boot.

  Also, when I tried to install some programs, the program requires .NET but think that is not installed.  I installed 4.51. I used the .NET cleanup tool to remove any trace of .NET programs, then reinstalled 4.5. In addition, .NET 4 would not install. Thanks for your help.

  Finally found a solution. I write that I have fought on this issue for more than a year! You can create a restore point before in case it does not work for you, so you can easily return to the original state of your computer.

  Go to http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx and download .net Framework cleanup tool. Run and remove all versions of .net.

  Download the latest version of .net - 4.5 right now.

  Go to this folder: C:\Windows\Microsoft.NET.  You are looking for a folder called "Assembly". Rename assembly2 (or something diferent).

  Restart the computer.

  Reinstall the .net program. Now should work unless you have other issues (and you can).

  Just an info - my computer wouldn't load .NET v 4, but successfully load she 4.51 OK.

• Loads of Boot Up Error Messages: "CLR error: 80004005 ',"the program can't start because LPK.dll is missing on your computer.

  I get a number of error messages when I try to start my Windows 7.  Initially, I just got a black screen or a screen frozen at the point of "Welcome".  I was unable to boot into safe mode and the only options were 'valuation' or 'normally', which none worked.  I was finally able to start in safe mode.  It is a VERY slow process, and once it finally loaded, I get 3 error messages.  It was noted that "the program cannot start because LPK.dll is missing on your computer.  I got the message "GfxUI has stopped working" as a "CLR error: 80004005".»  Once I click OK on all this, windows Explorer tries to restart and stop eventually.  I tried to find solutions, but it seems that I can't in the control panel to check the settings.  Although I can click on the Start button and I don't see the control panel option, it will not be open.  How to solve this problem would be greatly appreciated it's super frustrating!

  If you have a real win7 dvd, you can try to boot from this dvd and run a repair (disconnect external devices first)

  If you don't have that a recovery of certain system-makers, depends on its options on the question of whether you can fix or do a destructive restore (the latter will destroy everything on the disc)

• Create an instance of the component with CLSID {0002DF01-0000-0000-C000-000000000046} COM IClassFactory failed due to the following error: 80004005.

  I have IE 9 installed on my machine. When I try to create objects of IE using SHDocVw. Its version is 6.1.7601.17514. When I run my windows service it runs fine but when I create an installer and then run, it displays the error message: creating an instance of the component with CLSID {0002DF01-0000-0000-C000-000000000046} COM IClassFactory failed due to the following error: 80004005.

  IE = new SHDocVw.InternetExplorer ();
  IE = new SHDocVw.InternetExplorer (true);

  I tried the two lines.

  Please give me a solution.

  Hi Patrick,

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the MSDN forums.

  Please post your question in the MSDN Forums.

  You can follow this link to ask your question:

  http://msdn.Microsoft.com/en-us/library/aa752084%28V=vs.85%29.aspx

  I hope this helps. If you have problems of Windows in the future, let us know and we would be happy to help you.

• Compiling a project configuration gives error 80004005 - can't see what I'm doing wrong.

  Using VS 2008.

  I have several projects in a solution.

  I created a VS project to provide an installer.

  In the case the simplest, if I add only output project for one of my projects and compile the Setup project, I get error 80004005.  I know this is a file access error - but the output file is present.

  I have not seen a forum for Visual Studio - I hope I'm in the right place?

  Hi Wayne,

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below.

  See the link.

  http://msdn.Microsoft.com/en-us/vstudio/dd314520.aspx

• Error 80004005 When you try to copy photos from Droid 2 for PC

  I am trying to transfer photos from a Droid 2 to a computer and I get error 80004005.  I tried the Manager files, Backup Assistant, Photo Gallery, and they all give the same error message. How can I solve this copy my photos?

  Thank you!

  If your using Autoplay,

  Or if you don't, use the general options / open and display instead, with Windows Explorer

  Or, open wpg and use the import button.

  

  

• Error 80004005 HRESULT and the displayed directory is already empty.

  Separated from this thread.

  Hi jscott2045,
  Thanks for posting in the Microsoft community!
  I'm sorry to hear that you can not install Flight Simulator X.
  What is the full error message/code?
  Exactly when you receive the error?

  Please follow the steps below and let us know if that helps.
  1. click on the download the Software Licensing System Reset Tool package now link to start the download.
  http://download.Microsoft.com/download/1/c/d/1cd508f9-7520-4659-A122-a26e8804e884/MSKB928080.exe
  2. When you receive the file download dialog box, click Desktop, and then click Save.
  3. when the download is complete, click Close.
  4. double-click on the MSKB928080.exe file to your desktop.
  5. When you are prompted to accept the license agreement, click Yes.
  6. extract the files in the following folder:
  C:\MicrosoftKB928080
  Note If you receive the file Open - Security warning dialog box, click Run.
  7 run the software licensing system reset tool. To do this, follow these steps:

  a.Press Windows key + R, type cmd in the search box and press ENTER.
  b.At the command prompt, type the following command in the command window:
  CD C:\
  c.Press Enter.
  d.Type cd MicrosoftKB928080.
  e.Press Enter.
  resetsldl-all f.Type.
  Press Enter.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  Have the same problem, tried the above but get the following error HRESULT 80004005 and the displayed directory is already empty.  Other suggestions

  Hello

  Thanks for posting your query on the Microsoft Community.

  Error 80004005 Hresult might be due to damage to the windows system files. Inputs of corrupted system files can be a real threat to the well-being of your computer.

  There may be a lot of events which may have led to file system errors. An incomplete installation, an incomplete uninstallation, incorrect removal applications or equipment. It can also be caused if your computer is retrieved from an attack of the adware/spyware or virus or by an abnormal shutdown of the computer. All assets that the above may result in the deletion or corruption of entries in the windows system files. This corrupted system file will cause information missing and wrong linked and files needed for the proper functioning of the application.

  You can follow the methods and check them off below if it helps.

  Method 1

  Run the Analysis System File Checker.

  https://support.Microsoft.com/en-us/KB/929833

  Method 2

  Perform a restore of the system to a previous point

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Keep us posted on the State of the question, we will be happy to help you.