Error 8100037 when executing a backup (Windows 7)

Similar Questions

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

• I get 800B 100 error message when trying to install Windows Vista (KB972145).

  My computer will be not install Windows Vista (KB972145) I get the error 800b0100 message each time.

  Hello

  You have the incorrect error code in the header.

  This should help you:

  "Error 0x800B0100 when updates installed by Windows Update or Microsoft Update.

  http://support.Microsoft.com/kb/956702

  See you soon.

• Get the 0x8078012D error code when executing backup

  Original title: Windows backup fails, i/o device error
  ERROR:
  Backup Windows: Troubleshooting Options
  Check your backup
  The operation failed because of a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then retry the operation.
  Details: The request could not be performed because of an i/o device error.
  [^] Hide details [try to rerun backup] [modify backup settings] [Cancel]
  [Extended information]
  Backup time: 04/03/2013 23:51
  The backup location: \\LG-NAS\service\backup\ThinkPad X230T\system image backup\
  Error code: 0x8078012D
  
  
  -------------------------
  • Hello! I'm trying to save on NAS. I don't think that he has never managed to create a backup.
  • Windows 7 Home Premium 64
  • in the case where it is linked, I can't create or restore points.
  • I think that I recently received service Security Essentials finally run. thought that could launch something loose, but apparently not.
  • I sometimes 'Backup Windows cannot find the shadow copy of the source volume' error 0 x 80780020

  Hi Xicus,

  Perform the steps from the link below and see if it helps. 

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  Hope this information helps.

• I can't windows media udate player. I get the 0x8007007e error code when executing the validation program.

  I bought this computer new with XP about 5 years ago with no update problems in the past.

  What are the causes of error 0x8007007E ?

  When you use the Windows Update site, you can find that the service is unable to update your computer and returns a "General error":

  0x800a138f

  However, the REAL error code we need is in the Windows Update log.

  The windows update log is in the following locations:

  C:\Windows\Windows Update.log (Win XP only)

  Just copy and paste the above in Windows Explorer and the
  file will open automatically in Notepad on your computer utility.

  Most recent journal entries will be at the bottom. Search for entries of update failed and you will see an error next to him.

  Use the following tips to try to fix the 0x80072EE2 error... After each test point to determine if the problem is resolved.

  The most likely entry that you will see is:

  Error IUENGINE Determining computer configuration (error 0x8007007E: the specified module could not be found.)

  This article explains how to fix the 0x8007007E error code...

  What is the problem of 0x8007007E?

  I don't want to get too technical, but here are the main reasons for this error code is generated:

  (a) there are a number of security and bug issues in Microsoft XML (MSXML) version 3.0 - SP3 Analyzer.

  (b) the 0x8007007E error can also be caused by missing or corrupted dynamic link library (.) DLL files) - CABINET. DLL and URLMON. DLL.

  Here's how to try to solve the problem of 0x8007007E:

  (Step 1) - Windows XP only...

  There are a lot of applications provided with MSXML 3.0. Uninstalling one of these applications on a Windows XP system could potentially remove the MSXML 3.0 assembly files (msxml3.dll and msxml3r.dll).
  We shouldn't have to register only a single file...

  To do this:

  Click on Start menu and then click the icon for the race.
  In the small box that opens, type the three letters: cmd, and then click the OK button.
  In the command prompt window that has just opened (a black background and white text), type the following commands, pressing the ENTER key on your keyboard subsequently:

  regsvr32 msxml3.dll

  Now, type in the word: output and the window will close.
  Now restart and try and Microsoft Windows Update again...

  If it fails with the error 0x8007007E once again try step 2

  (Step 2) - Windows XP only...

  Now lets you update your system with the latest Microsoft XML Parser (MSXML) version 3.0 SP4

  Download here (use the msxml3usa.msi for the English version.)

  Notes...

  (a) you have to reinstall MSXML 3.0 Service Pack 4 If you upgraded to Windows XP to a computer running one of the operating systems following:

  -Windows 98

  -Windows ME

  -Windows NT 4.0

  (b) Windows 2003 Server
  comes with version 3.0 - SP4 and if you do not need to install it.

  (c) occasionally, Setup may need to restart the computer, but fails to inform the user. So restart your machine just in case. Then try Windows Update again.

  (d) to install a localized version (for example English) MSXML 3.0 SP4 on a system different from the previously installed/local (for example the French) version of MSXML 3.0 SP4, follow these steps:

  Cancel the existing record of the installation package by running the following command in a command prompt window:

  msiexec /x {45534579-B75B-4A42-953B-2EF8E1DEB4F3} /qn

  Now, install the new language version of MSXML 3.0 SP4.

  If it fails with the error 0x8007007E once again try step 3

  (Step 3) - Windows XP only...

  Search for missing/corrupted system files...

  Windows XP comes with a wonderful tool called System File Checker (SFC) it scans and verifies the versions of all protected system files after you restart your computer... However, it can sometimes miss a problem, so we can run the tool now to replace the CABINET. DLL and URLMON. DLL, if there is a problem with them:

  To do this:

  Click on Start menu and then click the icon for the race. In the small box that opens, type the three letters: cmd, and then click the OK button. In the command prompt window that has just opened (a black background and white text), type the following command:

  SFC/scannow

  then click OK

  You must be logged on as a member of the Administrators group to run SFC.

  You will need your Windows XP CD during this procedure if SFC needs to get an original file. Remember that Windows XP can have multiple instances of a. DLL to the folder and don't forget what version to which program.

  Notes...

  I was asked if it is possible to have a show of "progress meter" during the execution of SFC... It's the registry hack you need. Please do not go play with your registry if you don't know what you do!

  The system key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]

  Value name: SFCShowProgress

  Data type: REG_DWORD (DWORD value)

  Value data: (0 = disabled, 1 = on)

  IMPORTANT: This article will cure the problem 0x8007007E for many of you. However if it does NOT then I would like to here from you. Alternatively, have you tried something else that worked? Then send me the fix too!

  You can also find these useful error codes - for future reference, especially trying to understand error messages in the Windows Update log! (They are given here as a guide for general problems and further research on your part to solve the particular problem you may have.

• Error-63101 when executing the FPGA Interface C API Generator in LabVIEW 2012

  I'm using LabWindows CVI 2012 and 2012 LabVIEW FPGA module.  I try to use the FPGA Interface C API generator and I get the following error from a freshly generated .lvbitx bitfile.  I use the local server compiles on my PC.

  Error-63101

  NOR-RIO: A valid .lvbitx bitfile is required. If you are using a valid .lvbitx bitfile, the bitfile maybe isn't compatible with the software you use. Determine which version of LabVIEW was used to make the bitfile, upgrade your software to this version or later, and then try again.

  The problem occurs when executing CVI or LabVIEW.  I was able to do this earlier when I was compiling the FPGA in LabVIEW with the API generator 2011 downloaded from the Web site.

  A bit of weirdness in my setup, it's that I charged it off downloads from the website (latest files after 2012 NIWeek) rather than the normal distribution DVD.  I installed LabVIEW, so NI RIO, then the Xilinx tools compatible with 2012.  It works very well when you talk to the FPGA to a LabVIEW vi running on my Windows PC to the host.

  Any suggestions?

  Problem solved.  I had to download FPGA Interface C API generator 12.0.  It works now.

  I would have thought that if a product was called on the menu in LabVIEW 2012, it would be prompted to upgrade to a compatible version, when I installed LabVIEW.  The old version is not compatible with version 3.0 bitfiles, as identified on the following lines at the top of the .lvbitx file:

  
  
   3.0

• I get a 0xD0000006 error code when tring to use windows update

  I get a 0xD0000006 error Code when you use the default of windows update Setup

  d0000006

  Code: Error_Invalid_Handle - a possibility - bad hard drive

  Maybe a problem with a hard disk - important files may appear on the bad blocks.

  Try to run the "chkdsk/r" command at the command prompt

  You must open the command prompt by typing "cmd" in the start menu-> Run

  TaurArian [MVP] 2005-2010 - Update Services

• received the 0x800106b5 error code when trying to open windows defender

  I can't open windows defender, when I tried, it will display an error message, the 0x800106b5 error code. Hope someone can help me solve this problem

  Hello

  I think you may have the incorrect error number

  are you sure this isn't: «Error 0x800106ba»

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• "load error" message when you connect to windows vista account___

  When you connect on windows (vista) to my sons account, a window appears with the Dll Run in the upper left corner and a message that says: error loading C:\Users\... it indicates the name of my son, then - Home\AppData\Local\l41DMut.dll.  It does not appear on the admin or any account of my other children. (parent) account.

  I have tried to download a Web filter, but could not.  I wonder if this error message is the problem.  Even if this is not the problem with the download works do not, should not be there.  You can click on the x to close the box (it always appears twice) and then open Mazilla Firefox, etc.

  What is going on?? Can you help me?  Thank you!!

  Google has nothing for it; normally, who points to him being Malware...

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 1317 when installing applications on Windows 7 Ultimate

  Hello
  I get an Error 1317 when you install the application on windows 7 ultimate.  Always when the application attempts to create menus.  Always the path c:\programData\Microsoft\Windows\Start Menu

  Some applications if they have a choice to not allow all users on the system to access install ok.

  But more recently Adobe reader 9.3 and lighscribe software and graphic editing software all have had this same problem.  All these products all say they are versions of windows 7.

  I tried to take this path, but it did not help.
  Any idea?

  Hello

  Since you've already tried to take ownership of, I suggest you add everyone in the security list and give all permissions for everyone. To do this,
  You can follow the steps below and check if it helps.

  1. When you try to install the program, go to this folder:
  C:\ProgramData\Microsoft\Windows\Start Menu
  2. right click on the folder and then click Properties.
  3. in the Properties window, click on Security tab.
  4. now, click Edit , and then click Add.
  5. now, type everyone in the box and click OK.
  6 then check the full control box.
  7. click on apply and then click OK.

  If you have any software installed on the computer registry cleaning, I suggest you to uninstall the software.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XPath error occurred when executing unit Composite SOA testing

  I get the following error message when you run a Composite Test through the Oracle Enterprise Manager console.

  
  

  The strange thing is that XPath error does not occur when the same service is started from the client application - i.e. that it works very well when AQ puts a similar message on the queue. But when I put the same message in unit test, it throws the error of XPath.

  
  

  Any idea what steps I must take to get unit testing work?
  

  " < compositeTest compositeDN ="InvokeODIProject"xmlns =" http://xmlns.Oracle.com/SCA/2006/test "> "

  < on / >

  < start serviceName = operation "DequeueICom" = "Dequeue" isAsync = 'true' delay 'PT0S' = >

  < message >

  < part partName = "OBJ_CARRIER_OBJECT" >

  < content >

  < OBJ_CARRIER_OBJECT xmlns = "" >

  ICOM < SYSTEM > < / SYSTEM >

  < Interface_name > invoke ODI < / interface_name >

  < INTERFACEOPERATION > feed_staging_area < / INTERFACEOPERATION >

  < INTERFACEVERSION > 1 < / INTERFACEVERSION >

  < > 212 CORRELATIONID < / CORRELATIONID >

  < EVENTTIME > 2014-01-24T 12: 02:04.000 - 0000 < / EVENTTIME >

  < ACTION NULL = "TRUE" / >

  payload of <>

  < ODIRequest >

  < ODIUsername > * < / ODIUsername >

  < ODIPassword > * < / ODIPassword >

  < WorkRepository > * < / WorkRepository >

  < ScenarioName > TRUNCATE_CLAIM_HEADER < / ScenarioName >

  < ScenarioVersion > 001 < / ScenarioVersion >

  < frame > DEV < / context >

  < synchronous > true < / synchronous >

  < Session_name > INVOKED ICOM < / session_name >

  < / ODIRequest >

  < / payload >

  < / OBJ_CARRIER_OBJECT >

  < / content >

  < / part >

  < / message >

  < / run >

  < wireActions wireSource = "ODIInvokeProcess/ODIAgent" operation = "invokeStartScen" >

  < emulate duration = "PT0S" >

  < message >

  < part partName "part1" = >

  < content >

  < OdiStartScenResponse xmlns="xmlns.oracle.com/odi/OdiInvoke/" > "

  < session xmlns = "" > 1234 < / Session >

  < / OdiStartScenResponse >

  < / content >

  < / part >

  < / message >

  < / emulate >

  < / wireActions >

  < / compositeTest >

  [2014 02-04 T 10: 55:49.261 + 00:00] [AdminServer] [ERROR] [] [oracle.integration.platform.testfwk.TestCase] [tid: Thread-88] [userId: weblogic] [ecid: df7eb0dbec7f3140:-24efc088:143f879cee2, :-8000-0000000000036050, 1:17240] [APP: soa-infra] position of promotion message failed []

  oracle.fabric.common.FabricInvocationException: faultName: {{http://schemas.oracle.com/bpel/extension} subLanguageExecutionFault}

  messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}

  parts: {}

  Summary = < summary > XPath expression cannot run.

  An error occurs during the processing of the XPath expression; the expression is oraext:parseXML(bpws:getVariableData('Receive_TME_OUT_Dequeue_InputVariable','OBJ_CARRIER_OBJECT','/ns3:OBJ_CARRIER_OBJECT/PAYLOAD')) / / ODIUsername.

  The XPath expression cannot run; the reason was: internal xpath error.

  Check the detailed origin described in the text of the exception message and verify that the XPath query is correct.

  < / Summary >

  code = < code > < code > XPathExecutionError}

  cause: {XPath expression cannot run.

  An error occurs during the processing of the XPath expression; the expression is oraext:parseXML(bpws:getVariableData('Receive_TME_OUT_Dequeue_InputVariable','OBJ_CARRIER_OBJECT','/ns3:OBJ_CARRIER_OBJECT/PAYLOAD')) / / ODIUsername.

  The XPath expression cannot run; the reason was: internal xpath error.

  Check the detailed origin described in the text of the exception message and verify that the XPath query is correct.

  }

  at oracle.fabric.CubeServiceEngine.post(CubeServiceEngine.java:626)

  at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:142)

  at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:197)

  at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:215)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

  at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)

  to com.sun.proxy. $Proxy361.post (unknown Source)

  at oracle.integration.platform.testfwk.execution.TestFwkService.launchNormalTestCase(TestFwkService.java:416)

  at oracle.integration.platform.testfwk.execution.TestFwkService.launchTestCase(TestFwkService.java:203)

  at oracle.integration.platform.testfwk.execution.TestFwkService.runTestCases(TestFwkService.java:546)

  at oracle.soa.management.internal.ejb.impl.SOATestBeanImpl.executeTestCases (SOATestBeanImpl.java:129)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  Hello

  Apparently not very well... Why it is oraext:parseXML if the content is XML already? The QA message probably has the payload in a CDATA tag...

  See you soon,.

  Vlad

• error 2155348249 when trying to backup systemstate on windows 2008 using windowsserverbackup

  Hello

  I have Windows 2008 R2 standard. Whenever I tried to backup systemstate via windowserverbackup, it failed and gave me a 521 event and error 2155348249 and saying: there is not enough space to create vs...
  However, if I did backup other files, it went fine.  I have a lot of free disk space on C.  I could not find a solution on the web.  I increased shadowstorage vssadmin and no help.
  Any ideas?

  You must go to the windows servers forum

• Time machine unable to complete upward "an error occurred when creating a backup folder".

  Hi, I just graduated to El increase captain and since I had problems with my hard drive backup and the Time Machine. After you have installed the El captain, I get an error message that says 'save the failure. Full backup impossible. An error occurred during the creation of the backup folder. "Run disk utility to repair your backup disk.  When I made that I received the error "update boot support partitions for the volume as required.  Failed to dismount the volume for repair. Operation failed.  I can see the name of the hard disk in the sidebar of finder, but it has no history icon to eject so I right click on it and select "Force eject". Unplug the USB and reconnect USB for hard disk reappears in the side bar of the Finder. Once again same message execution utility disk first aid. I try to partition the drive in disk utility, but the button is grayed until I have change the disc name in the text field "Partition" 'apply' reselect "OX extended extended (journaled)" in the menu drop-down "Format". I then click on apply and get the error message that it "cannot unmount disk '. "Move up" button at the top of the disk utility window seems to do nothing. I then tried to drive 'Erase' and got the error message "disc remove POSIX reports: operation could not be completed." Input/output error. Operation failed. "So I clicked once more"Force eject", disconnected and reconnected USB, hard drive selected in the sidebar"Finder"ran"Set_Up.dmg"that was on the hard drive. Who seemed to rise to recording on the Seagates Web site. Player again activated in selected Time Machine preferences 'Back Up Now' of Time Machine in the Menu bar has obtained progress bar "Preparation to Back up...". "in Time Machine preferences for half an hour... Back at the beginning of the loop. States of Error Message 'save the failure. Full backup impossible. An error occurred during the creation of the backup folder. "Run disk utility to repair your backup disk.

  Ref: http://pondini.org/TM/Troubleshooting.html see espically - http://pondini.org/TM/C10.html

  Full backup impossible. An error occurred during the creation of the backup folder.

• UIR-file not found (error 94) when executing dll CVI in TestStand

  I am trying to execute a dll that I created in CVI in TestStand.  I did have problems so far running all features except for the function that calls my user interface.  Whenever I run it, I get an "error 94, file '... 'not found' IUR.»»  This particular IUR is usually called in the main() function when I create an exe file in CVI, but I'm the appellant for another function to perform in TestStand.  Any suggestions on how to fix this?

  Hello

  You use the correct LoadPanel call. You must use LoadPanelEx().

  Concerning

  Ray Farmer

• Error: 0x8007042c when you change the Windows Firewall settings

  Original title: error code: 0x8007042c

  After the updates have been installed windows Sp1. my Windows Firewall failed to start. I have put all my default firewall setting. I tried to force it to manual startup. It fails every time. I get an error code: 0x8007042c. I am running System Mechanic Pro 10. I'm trying to get the mech system for launch and there as well.

  Hi diverken52,

  ·         What is the operating system installed on the computer?

  Check to see if the following is useful.

  Method 1: Run automated troubleshooting and check if it helps.

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2: If you are using Windows 7, you can read the following article.

  Error message "firewall Windows cannot change some of your code 0x8007042c settings error" when you try to activate your Windows Firewall

  Respond with more information so we can help you best.