Error adding Vcenter server to view administrator

Similar Questions

• Weird error with vCenter Server 5.1 plugin

  Hello

  I installed orchestrator device 5.1 with vCenter plugin. Everything is green and seems well configured.

  I am able to connect with the vCenter client and access all workflows of my!

  But when I access parts of plugin and wants to explore the vCenter Server, orchestrator returns me this error:

  [16:29:50.477 2013-04-15] [E] the authorization to perform this operation was denied. : System.View/Folder - group-d1(IP vCenter)

  I don't understand why. The user that I configured in the configuration of the plugin vCenter is an administrator and has all privileges...

  You have an idea?

  Thanks for your help.

  Concerning

  Hello!

  Are you sure the user that you have configured to connect to vCenter has the appropriate permissions to this level?

  Even for an administrator at the level of the root in vCenter you can remove/override the lower-level permissions.

  Using SSO?

  And: What authentication policy for the vCenter Plugin have you configured?

  With a ' user' logs also the user connect to vSphere WebClient / vCO must have the appropriate permissions.

  You can try to reconfigure the vCO to use a "shared session", then for all operations of the user you set up (hopefully with administrative permissions in vCenter) is used for all operations.

  See you soon,.

  Joerg

• Add forwarding server to view administrator

  As the title describes, im having a problem adding the transfer of 5 Server view to view administrator.

  So far, Ive installed all the components of the view according to the documentation. vCenter and composer are on a VM win2008R2, vConnection is on a separate virtual machine and therefore transfer server.

  vCenter is added to the administrator of the display, but when I try to add a server to transfer by clicking on 'Add a forwarding server' in the tab transfer server and instance of vCenter selection and then click Next. After that, I get an empty box with no server to select or find.

  Server vCenter, composer and connection are all green lit in view administrator. No problems with adding those and no problems with the installation of the server transfer. All the parameters of field have been recognized.

  Its pretty much excact same problem as this topic:

  http://communities.VMware.com/thread/297106

  Current tho realese notes say that the issue with the disk controllers is resolved.

  Any suggestions or solutions?

  Best regards

  Patrick

  Yes.

• VMWare v6.0 to 6U1 or 6U2 Upgrade - external PSC - 1603 errors in vCenter Server

  Hi all

  I was wondering if someone met the upgrade a version 6.0 VMWare install to U1 or U2 upgrade and received a 1603 error.

  The installation runs correctly on the external PSC, but when running against the vCenter Server fails and has a 1603 error and did a restore.

  The VCSServiceManager component installation failed with error code "1603". Check the logs for more details

  I tried all the other threads suggesting to have .net installed 3.5, the ipv4 stack and database permissions but are all there.

  Any help would be greatly appreciated.

  For those who have encountered this problem in the future, was the way I solved this:

  Question has been connected to the VMWare SysLog Collector Service. There is a problem with the new syslogcollection MSI being able to upgrade, uninstall or reinstall on the legacy.

  Best way to solve this problem is to remove the reference to the old service of library of Windows Setup syslog collector. The way I did it was to use the Windows Installer CleanUp legacy.

  Post this, remove installation held as scheduled and transmitted "installation VCSServiceManager.

  If you come across this issue - you can test it by trying to run the msi syslogcollector contained in the directory of files binary vCenter.

• EAS console error adding essbase server after the power supply 500

  Hi guys,.

  I do a migration of cube 9.3.1 to 11.1.2.3 via the wizard of Migration of EAS.

  Yesterday, I tested the link and was able to copy it to an application. After having applied the Group of hotfixes,.500 I can't connect to the 9.3 old servers more. Nothing has changed. I can always get a smartview connection and by using the IP address of the server does not either, which excludes any network problem. When I try to add the old server again the console log says:

  Admin June 25, 2014 11:43:50 CEST com.essbase.eas.admin.defs.AdminCommands.AddServerToUserList Succeeded

  Essbase Server: lsrap11:1423 com.essbase.eas.essbase.defs.ServerCommands.Connect June 25, 2014 11:43:50 CEST

  Error: 0: your session is not connected to the server/agent Essbase.

  If anyone can replicate it? I would like to know if it is a bug and I have to cancel the Group of hotfixes to complete the migration the cubes.

  See you soon,.

  Alin

  I think it's a bug I've seen the same problem and then I rolled back EAS.500 and it worked again.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• vCenter Server compatibility

  Hey all,.

  I'm currently trying to install the vCenter server in a VM and I have a few questions:

  1. it is even possible to install it in a virtual machine?

  2. I keep hitting an error "the vCenter server is not supported by this platform.  I use a Win7 Ultimate 64 bit VM on a Ubuntu 10.11 host.

  Thank you!

  1. it is even possible to install it in a virtual machine?

  2. I keep hitting an error "the vCenter server is not supported by this platform.  I use a Win7 Ultimate 64 bit VM on a Ubuntu 10.11 host.

  Yes, it is possible and taken in charge.

  However, am not sure (infact don't think) runs a virtual vCenter on one platform other ESX / i is supported.

  For vCenter running on a virtual machine:

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=10087

• How start/use vCenter Server?

  Hi guys, first I want to apologize to post an easy question to most of you, but it seems that could not answer this question with most of our staff here. For starters, I installed a vCenter Server 4.0 on a Windows XP Pro 32 Bit. The installation goes smoothly using the default SQL database that provides VMware. However after you have installed the server vCenter, we could not find anywhere! We tried to find it in all programs & gt; & gt; VMware & gt; & gt; & lt; And nothing! & gt;! If I'm not mistaken there must be an executable file as the vSphere Client shortcut located in the same directory?

  So far, we have concluded that the vCenter Server is installed in the computer as we gazed at the Add/Remove program list and found the vCenter Server installed! We also enabled vCenter Server Services but still nothing. We find the vCenter Server in the wrong direction or we should access the vCenter Server via a web browser? Any solutions would be appreciated.

  VMthinker wrote:

  UH thanks for your reply but I'm abit still confuse as I just want to know how to start the vCenter Server?

  The method is similar to the start of the vSphere client whereby you just double click the shortcut icon?

  vCenter runs like a bouquet of services. The installation created these services, to 'autostart' and began to their. Because they are defined in the autostart, they become active whenever the system is booted.

  I have already installed the server vCenter Server if the host of the vCenter server would be the same IP as the server ESXi?

  No, of course not. vCenter runs on a separate host Windows. The vCenter server IP address must be unique within the subnet IP used as each host must have a unique IP address.

  Even once, the vClient dowhnload, beginning as you start Word (or Openoffice), enter hostr of the vCenter server's NetBIOS name or its IP address as the destination to connect to and a combination of DOMAIN\username of a user who belongs to the vCenter server's local administrator group.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Backup of VM best practices using vCenter Server

  Hi all

  I currently plan to backup my virtual machine in VMWare ESXi 4, I have

  installed the trial vCenter Server 4.0 administration server.

  My 2 x ESXi 4 server connected to a San and sharing a single LUN so

  in this case, I would like to create another LUN in the SAN to

  Hold the Backed up SAN. (see attachment)

  and I'm still not sure about which license should I get for this question? between essential or Foundation

  My goal is to be able to do:

  1 backup and restore using VCB

  2. ease of management of VM creation and the cloned VM management, models and migration (moving between SAN and SATA Local data store) offline.

  HA and VMotion is not important at the moment.

  any suggestions and comments will be greatly appreciated.

  Thank you

  Kind regards

  AWT

  There is no way to "upgrade to ESX ESXi" without a complete reinstallation of the product.  If you really want instead of ESXi ESX, you should be able to just install ESX, ESXi over and tell him to keep all existing partitions intact VMFS.  You will lose all your settings (vSwitches, etc.), but you shouldn't lose all virtual machines.  In fact if the ESX host is SAN attached so you can just blow everything about ESXi installation and install ESX and reattach the VMFS LUNS to the new ESX host.  You shouldn't lose anything it. Make sure that the ESX host is not attached to the SAN when installing ESX (unplug the cable) than who has been known to cause problems.

  You will get no reduction in functionality if you stay with ESXi.  Once an appropriate license, ESX and ESXi work exactly the same.  The main differences lie in the way you manage servers with the absence of a Service Console on ESXi.  Given that VMware intends to get rid of the Service Console completely in future versions, it might be logical just to go in that direction now and stay with ESXi.

• Connection error to the login server to view while adding the view composer

  Hello

  I added VM Vcenter server successfully to the server connection in my opinion. now, I'm trying to add server offline view composer to the login server setting. I get the error message

  Unable to connect to view the composer.

  Thanks in advance for any help

  Hi, could you please download the log files. Check the link mentioned below, it will help you.

  VMware View 5.2 Documentation Library

• Error in the plug-in when just browsing added vcenter

  Hello

  I just added a new vcenter to manage with orchestrator. I add the certificate and connection that seem good. Everything is green in the configuration of the web page! Please see printscreen!

  

  When I opened the orchestrator client, I can see my first VCenter and browse the object. I can see my second VCenter but when I try to go there is just a message: "error in the plugin.

  

  Thank you very much for your help!

  Nicolas

  Hello

  This error occurs when the vCO Server uses LDAP credentials to connect to vCenter plugin. When you configure the server vCenter Server in the configuration of vCO, it uses the vCenter credentials to authenticate. Now, when you connect to vCO with vCO Client, it uses the same credentials to authenticate the plugin vCenter in the client. Therefore, the best way to solve this error is to create the same user (with the same credentials) that connects to the server vCenter Server, the LDAP protocol you are using, with administrative rights. Therefore, the same user a/c will be used to connect to vCenter and also of course the vCO client.

  Hope this is useful and you are able to resolve this error.

• View 7 vCenter Server Can can't Verify Certificate

  We have a vCenter 6 and one instance of vCenter 5.5.  vCenter 6 Let check me the default self-signed CERT. vCenter 5.5 when you click on verify does nothing.  When you go to the server and change the 5.5, it still gives this error:

  "Eventually, a server vCenter no valid certificate. Please verify the identity of the vCenter Server partner. »

  I tried to uninstall and reinstall composer still nothing does not.  The 'view composer servers' Let's check me the certificate.  I guess another bug with Horizon view 7.

  It is actually not a bug. You should perhaps follow http://pubs.vmware.com/horizon-7-view/topic/com.vmware.ICbase/PDF/view-70-installation.pdf and enable TLSv1.0 on the login server as well as on the composer.

  André

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• Need help to connect to the server of composer, in view, administrator

  I'm setting up a Horizon view 6 eval. The text environment will be low, and I want to use linked clones. The configuration is the following:

  5.5 vSphere hosts

  vCenter 6 (device) - not joined to the domain AD due to a bug VCSA 5.5 & 6.0 with the way my AD domain name is named; specifically, the domain name is ad. domain.net, but the name of Pre-windows 2000 is the domain

  View connection on Windows 2012 R2 VM

  View dial on Windows 2012 R2 VM

  Database SQL on separate server

  I followed the instructions in the eval guide and this blog to put in place: Horizon view 6.0 | Of Sean IT Blog

  All with the prerequisites and setup went well. I am now at the stage where I bind the connection to the server with vCenter and composer. The connection of vCenter worked correctly (using a local account that I created in vCenter for display for use with the permissions in a role). In the settings of the composer page, I keep getting an error "Unable to connect to View Composer." I am specifying the user account is the composer service account that I created in AD called vcmpSvc, which has permissions in AD create/delete computer objects and is also in the local Administrators group on the server of composer. I'm using the correct password, checked by connecting locally on the server of composer with the service account and by launching a command with the admin elevation prompt. I tried the following formats for the user name:

  vcmpSvc

  domain\vcmpSvc

  [email protected]

  In addition, the SOAP port was 18443 (unchanged from the default value) and the firewall is disabled on the server of the connection and the composer. What Miss me?

  Too bad! I solved it. It turns out that the composer on Windows Server installation has failed. Everything seemed fine, but when I looked in the list of services in order to check that it was starting well, I saw that he was missing completely. I installed new composer and everything works perfectly now.

  I hope this helps someone!

• We get an error when I try to collect data from vCenter Server. But the Collection of Cluster works!

  Hello

  I m getting a strange errormessage when he tries to load my vCenter Server inventory.

  I have configured my vCenter Server as the endpoint server and I was able to load the Clusters. When I klick collection of data in a Cluster (Cluster of EQL 1) I can load all the data and the State is 'successful', but when I try to load the inventory FRO the vCenter Server (to get the models) im getting this error message:

  The treatment [inventory], error details error: illegal managed object reference type, folder.

  The same schows Agent logs:

  [26.08.2014 16:48:16] [Info]: start: treatment Workitem ID [2e38598e-4385-4b2d-bc88-fd2b773d1f98] [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.Admin.Hostname = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] VirtualMachine.Admin.ParentIdentity = [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.ManagementEndpoint.Name = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] VirtualMachine.ManagementEndpoint.Identity = [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.ManagementEndpoint.Endpoint0 = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.Admin.Name = inventory

  [26.08.2014 16:48:16] [Error]: <? XML version = "1.0" encoding = "utf-16"? >

  < Boolean > false < / Boolean >

  Error parsing [inventory], details of the error:

  System.ArgumentException: Illegal managed object reference type, folder.

  at DynamicOps.Vrm.Agent.vSphere.VSphereGetHostsRequest.ExecuteImpl)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetHosts (ManagementEndpoint managementEndpoint)

  to DynamicOps.Vrm.Agent.Collector'3.get_Hosts)

  to DynamicOps.Vrm.Agent.Collector'3.CollectManagementEndpoints)

  to DynamicOps.Vrm.Agent.CollectInventory'3.Collect)

  to DynamicOps.Vrm.Agent.BaseHypervisorAgent'3.EnumerateHypervisorResources (collector collector 3, WorkItem workItem, PropertyBagHelper propertyBagHelper)

  to DynamicOps.Vrm.Agent.BaseHypervisorAgent'3.ProcessWorkitem (WorkItem workItem, task of the chain, PropertyBagHelper propertyBag)

  to DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.ProcessWorkitem (WorkItem workItem, task of the chain, PropertyBagHelper propertyBag)

  to DynamicOps.Vrm.Agent.BaseAgent.ProcessWorkitem (WorkItem workItem)

  I hope that someone had an idea, im out of ideas.

  THX Steven

  There is no data for the endpoint collection... And I'm not entirely sure of how you added the vCenter object it... y at - it a calculation object named "vCenter? To answer your specific questions about the models, however, they must be stored on a cluster that is part of the tissue group for data collection to pick them up... They are not considered as a global entity (as a resource calculation). Add models to one of the clusters and then to collect data on it, and you should be fine.

• Error connecting to vCenter Server

  After that a sudden loss of power I got the following error trying to connect to vcenter server:

  Internal server error

  2013-05-15 17:47:44, 772 | DEBUG | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). JobManager | Add the activity log: JOB_VC_START
  _CONNECTION > < cloudvcs0(com.vmware.vcloud.entity.vimserver:23b4fe43-1f29-4c6f-adc1-1048b2a8845c) > |
  2013-05-15 17:47:44, 773 | DEBUG | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). CJob                           | updateFailedJob (com.vmware.vcloud.ap
  i.presentation.service.InternalServerErrorException) with locale = null |
  com.vmware.vcloud.api.presentation.service.InternalServerErrorException: internal server error
  at com.vmware.vcloud.vimproxy.internal.impl.VcUpdateListenerImpl.onOuterLoopBreakWithException(VcUpdateListenerImpl.java:721)
  at com.vmware.vcloud.vimproxy.internal.impl.VcUpdateListenerImpl.outerWaitForUpdatesLoop(VcUpdateListenerImpl.java:633)
  at com.vmware.vcloud.vimproxy.internal.impl.VcUpdateListenerImpl.run(VcUpdateListenerImpl.java:343)
  Caused by: org.hibernate.exception.GenericJDBCException: could not execute the query
  at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126)
  at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114)
  at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
  at org.hibernate.loader.Loader.doList(Loader.java:2231)
  at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2125)
  at org.hibernate.loader.Loader.list(Loader.java:2120)
  at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:118)
  at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1596)
  at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:306)
  at com.vmware.vcloud.inventory.cache.PropertyMapDao.validateOrGet(PropertyMapDao.java:336)
  at com.vmware.vcloud.inventory.cache.PropertyMapDao.bulkValidateOrGet(PropertyMapDao.java:321)
  at com.vmware.vcloud.inventory.cache.PropertyMapDao.bulkValidateAndGetNewer(PropertyMapDao.java:267)
  at com.vmware.vcloud.inventory.cache.InventoryCacheManagerImpl.bulkGetInternal(InventoryCacheManagerImpl.java:418)
  at com.vmware.vcloud.inventory.cache.InventoryCacheManagerImpl.bulkGet(InventoryCacheManagerImpl.java:549)
  at com.vmware.vcloud.inventory.impl.InventoryServiceImpl.processUpdateSet(InventoryServiceImpl.java:931)
  to com.vmware.vcloud.inventory.impl.InventoryServiceImpl.access$ 300 (InventoryServiceImpl.java:145)
  to com.vmware.vcloud.inventory.impl.InventoryServiceImpl$ 5.run(InventoryServiceImpl.java:860)
  to com.vmware.vcloud.inventory.impl.InventoryServiceImpl$ 5.run(InventoryServiceImpl.java:826)
  at com.vmware.vcloud.common.persist.ConversationContextExecutor.execute(ConversationContextExecutor.java:46)
  at com.vmware.vcloud.inventory.impl.InventoryServiceImpl.processAndBatchUpdates(InventoryServiceImpl.java:826)
  at com.vmware.vcloud.inventory.impl.InventoryServiceImpl.handleUpdate(InventoryServiceImpl.java:799)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:309)
  at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:183)
  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150)
  at org.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202)
  to $Proxy187.handleUpdate (Unknown Source)
  at com.vmware.vcloud.vimproxy.internal.impl.VcUpdateListenerImpl.dispatchUpdates(VcUpdateListenerImpl.java:1080)
  at com.vmware.vcloud.vimproxy.internal.impl.VcUpdateListenerImpl.innerWaitForUpdatesLoop(VcUpdateListenerImpl.java:925)
  at com.vmware.vcloud.vimproxy.internal.impl.VcUpdateListenerImpl.outerWaitForUpdatesLoop(VcUpdateListenerImpl.java:594)
  ... 1 more
  Caused by: java.sql.SQLException: ORA-01555: snapshot too old: rollback segment number with the name "" too small
  ORA-22924: snapshot too old

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:388)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:381)
  at oracle.jdbc.driver.T4C8TTILob.processError(T4C8TTILob.java:789)
  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
  at oracle.jdbc.driver.T4C8TTILob.read(T4C8TTILob.java:146)
  at oracle.jdbc.driver.T4CConnection.getBytes(T4CConnection.java:2313)
  at oracle.sql.BLOB.getBytes(BLOB.java:319)
  at oracle.sql.BLOB.getBytes(BLOB.java:209)
  at oracle.jdbc.driver.T4CBlobAccessor.getBytes(T4CBlobAccessor.java:464)
  at oracle.jdbc.driver.OracleResultSetImpl.getBytes(OracleResultSetImpl.java:676)
  at oracle.jdbc.driver.OracleResultSet.getBytes(OracleResultSet.java:398)
  at org.hibernate.type.AbstractBynaryType.get(AbstractBynaryType.java:101)
  at org.hibernate.type.NullableType.nullSafeGet(NullableType.java:184)
  at org.hibernate.type.NullableType.nullSafeGet(NullableType.java:173)
  at org.hibernate.type.AbstractType.hydrate(AbstractType.java:105)
  at org.hibernate.persister.entity.AbstractEntityPersister.hydrate(AbstractEntityPersister.java:2124)
  at org.hibernate.loader.Loader.loadFromResultSet(Loader.java:1404)
  at org.hibernate.loader.Loader.instanceNotYetLoaded(Loader.java:1332)
  at org.hibernate.loader.Loader.getRow(Loader.java:1230)
  at org.hibernate.loader.Loader.getRowFromResultSet(Loader.java:603)
  at org.hibernate.loader.Loader.doQuery(Loader.java:724)
  at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
  at org.hibernate.loader.Loader.doList(Loader.java:2228)
  ... 32 more
  2013-05-15 17:47:44, 774. DEBUG | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). JobString | Object - object: cloudvcs0 (com.
  name of the VMware.vCloud.Entity.vimserver:23b4fe43-1f29-4c6f-adc1-1048b2a8845c operation): JOB_VC_START_CONNECTION |
  2013-05-15 17:47:44, 842. DEBUG | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). CJob                           | Not the last pending work: [cloudvcs0 (c
  OM. (VMware.vCloud.Entity.vimserver:23b4fe43-1f29-4c6f-adc1-1048b2a8845c)], status [3] = |
  2013-05-15 17:47:44, 846. DEBUG | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). CJob                           | Last jobs update: [cloudvcs0 (c
  OM. (VMware.vCloud.Entity.vimserver:23b4fe43-1f29-4c6f-adc1-1048b2a8845c)], status = [3], [15/05/13 17:47] |
  2013-05-15 17:47:44: 964 | DEBUG | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). ValidationServiceImpl | Jump queuing of the validator for co
  validator of m.vmware.ssdc.backend.valeventhandler.ProviderVdcVALStateValidator since it is a duplicate, current validation queue length: 1 |
  2013-05-15 17:47:44, 966 | INFO | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). InventoryServiceImpl | Reception earphone stopped for VC 23 b
  4fe43-1f29-4c6f-adc1-1048b2a8845c |
  2013-05-15 17:47:44, 966 | WARN | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). InventoryRecordPurger | Records of the inventory for 23b4fe4 trap
  3 1f29-4c6f-adc1-1048b2a8845c is not active.
  2013-05-15 17:47:44, 968 | INFO | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). VcUpdateListenerImpl | Releasing the proxy property of VC
  23b4fe43-1f29-4C6F-ADC1-1048b2a8845c |
  2013-05-15 17:47:44, 968 | INFO | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). VcUpdateListenerImpl | trying to clear the instance of cell id on
  VC 23b4fe43-1f29-4c6f-adc1-1048b2a8845c (current number of retries to 0). |
  2013-05-15 17:47:44, 969 | INFO | 23b4fe43-1f29-4c6f-adc1-1048b2a8845cListener (260). VcUpdateListenerImpl | 23b4fe43-1f29-4c6f-adc1-1048b2a88 VC
  45 c: attempt to set the instance id of cells from 70 to 0.

  Caused by: java.sql.SQLException: ORA-01555: snapshot too old: rollback segment number with the name "" too small

  ORA-22924: snapshot too old

  I found these two articles in the KB:

  VMware KB: The vCloud Director Web UI reports the error: ORA-01555: snapshot too old: rollback number with n segment...

  VMware KB: Make sure that you have adequate undo tablespace before upgrading a vCloud Director Oracle database

  I added more space for the undo tablespace, new redologs, also change the setting of retention for all LOB in the vCloud regime without a different result.

  Anyone have any idea on this?

  Best regards

  I finally had an answer for the Oracle error.

  I did a full export of the vcloud database and detect an error in this table:

  ORA-31693: Table object "VCLOUD" data "" PROPERTY_MAP "impossible to load/unload and being ignored because of the error:

  ORA-02354: Error exporting/importing data

  ORA-01555: snapshot too old: rollback segment number with the name "" too small

  ORA-22924: snapshot too old

  This OPINION score details this condition:

  Export fails with ORA-2354 ORA ORA-1555-22924 errors and how to confirm the Corruption of the LOB Segment using the export utility? [833635.1 ID]