Error after the creation of the database

Similar Questions

• Error: 0: the database does not accept a connection

  Hello

  We have EMP 11.1.2.1 and EAS worked very well. We applied successfully patches of SAE 13904635 and 13904640.

  However, after you apply the patch, we received the error

  Error: 0: the database does not accept a connection

  For example, when connect us to EAS and click the EssbaseCluster1 under "Essbase Server" node we don't get something, like the list of application as such. We just get the error log.

  What could be the problem, is there anything, we had to do after you apply the hotfix?

  The essbase server seems to be running so we can pull the reports in the workspace and all.

  Thanks for all the answers.

  Have a read of the following Oracle Support doc - "impossible to add or connect to an Essbase server in Essbase Administration Services (EAS):" error: 0 in Essbase Administration Services: the database does not accept a connection "or" "error: 105: Login with token at MaxlJni" "(Doc ID 1469492.1).

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Cannot connect - error loading the database...

  Hello

  Since last night find it me impossible to log in on my Skype.

  He puts me "error loading the database. Skype." It is possible that another instance of Skype to use it.

  I have reinstalled Skype, restart my pc, close all programs that could use it.

  My husband get a leverage son skpe without pb so it comes well d a pb with my nickname... going to Word of the change back I. Despite all this, I still have the same message that appears! 1

  did anyone have the same pb? and how he made it?

  Please pour your help!

  Rrbonjour

  so I did well the manip: Task Manager, process shutdown Skype.

  then relaunch the application, but it gives me the same result...

  I made a new system more earlier but it's restore gives me the same result...

  I asked a third person open my account on another pc and ca works... so it just my pc, not a hacking, (already it reassures me!)

  My spouse does so well to open Skype with his nickname but I still nothing.

  Application rattachee a Skype name can she used Lun?

• LSD unexpected closing of the errors after the installation of el capitan

  LSD unexpected closing of the errors after the installation of el capitan

  get a lot of errors after start-up and during work

  This procedure will remove some cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data.

  Triple-click anywhere in the line of text below on this page to select this option:

  open $TMPDIR..

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. Depending on the web browser you use, you may need to press the return key. A folder with a long, random name should open. Inside, there should be a subfolder named 'C '. Drag that to the trash.

  Log off or restart the computer. Empty the trash. Test.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• IAM get AC-00013: error generating file context after the database upgrade from 10 g to 11 g

  Perl adbldxml.pl level = appsuser = apps appspass = XXXX template=/backup/EIGC/eigcdb/11.2.0/appsutil/template out=/oracle/PROD/proddb/11.2.0/appsutil/ servername = ebsapps db

  From generation of context for db level files...

  Using /backup/EIGC/eigcdb/11.2.0/jdk/bin/java JVM to run java programs...

  The log file for this session adbldxml is located at:

  /Backup/EIGC/eigcdb/11.2.0/appsutil/log/adbldxml_05310924.log

  AC-00013: error: file: /backup/EIGC/eigcdb/11.2.0/network/admin/EIGC_ebsapps/listener.ora is not a valid file, such as the SID database could not be found for connection string: EIGC

  Cannot connect to the database with the settings above, please answer the Questions below

  Dear Yaanos,

  Thank you for your fast & immediate action plan solve the problem.

  Kind regards

  Anand

• Lenovo A1000-camera error after the last update

  Yesterday, I received an update notification. My mistake I didn't take more notes on what was this update, but I have the idea that it was on the build. After that, the camera back fails to start and give an error constant. Someone had a problem simiral or any idea of solution?

  1 million thanks in advance

  Today, after the update, finally the camera work. Thanks, LENOVO.

• I get this error after the last update WindowsUpdate_80200053

  I have the 64 bit version of vist home.

  After the last patch of weeks

  "Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 64

  "Download size: 25,7 to 82.7 MB.

  I get the error WindowsUpdate_80200053. Also now I can't download active x controls, updated maleware deleting files (Spy bot s & D gives check sum errors), any web site, including the Microsoft Update download (I get warnings of the author is unknown and corrupted file warning.)

  My wife has the 32-bit version and having the same problems.

  Hello Stdonitus,

  Please try the steps, in order to verify if there is no virus or Spyware issues below.

  1. run the Microsoft Windows malicious software removal tool

  2 download, install, update and run: (freeware) SUPERAntispyware and Malwarebytes' Anti-Malware (freeware).

  3. run this analysis online (safe mode with network, if possible):
  http://OneCare.live.com/site/en-us/Center/howsafe.htm

  4 see and follow carefully:
  "Looking for / help with software, spyware software malware and Hijackware.

  If you need help with virus-related issues, contact the Support Services Microsoft product.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  If you need more assistance for the position of virus/worm to the Microsoft Newsgroup - security - virus.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• . M2T "generic import error" after the files moved

  That someone know something for winging a .m2t file that PrPro generated previously imported and edited very well, who has then squirrels after the file has been moved?  (details below)
  

  Thank you.

  -------------------------------------

  Recently, I moved the source (including the sidecar files) for work files off my C:\ to a backup disk, in a desperate move to take off a suddenly frigid Premiere Pro and still (C:\ drive space was extremely low).  I thought I was OK to do it, since I had exported all my final video files and confirmed that they looked fine (amount).  However, some of them were .m2t files, which still had no audio its chronology.  Much scrounging to find out later, I decided to try to re - export these files from their source PrPro projects, this time without audio multiplexing.  I expected to just move the source files in their new location.  It worked for most of the files, but not the .m2t file.

  Here are my patches attempts (failed):

  1. Use move function PrPro manually navigate to the file and select it.  (Fails.  File is not displayed in the location of the project and is still missing in the timeline.  "But PrPro generates no error to announce or explain the failure).
  2. Re-import the file in the current location.  (Fails.  I get "error importing generic," with zero further info.)
  3. Move the file (and the sidecar files) to the original location, then re - locate with PrPro.  (Fails, as 1.)
  4. Re-import a file in the location restored (after 3).  (Fails.  Same as (2).
  5. Copy and rename then file (and sidecar files) in restored location and then freshly import this file completely-news-to-PrPro.  (Fails.  Same as (2).

  I have not yet tried the things:

  1. Deleted cache.  I have read horror stories here on edit work days lost to empty cache, then now that I only once the discs are printed and iso are archived.
  2. Convert a file using another program .m2t. Strictly speaking, I tried with (groan) Windows MovieMaker, but it will not display an image larger than 740 x 480 (Yes, settings allow larger, but only as Giants black residents.)  I maybe reinstall my prior NLE (Avid Pinnacle) - should work, but may take hours to reinstall.

  Solution:

  I gave this fixation within PrPro and rather bought a type of video file converter.  I got Video Converter Ultimate of Wondershare, which was not too expensive and works well.  Now all my .m2t files are converted into file types PrPro like much better, and they import no problem in my project.

• Do "request failed: ' error after the workflow run 'assign a state change.

  I try to start a workflow that sends an email once a machine is put into operation.  A simple task, I think.

  I have installation vRA and vRO and am able to supply machines form vRA before making further changes.

  In vRO, I ran the workflow of customization of the vCO 'Install', and the workflow "to assign a workflow of change of State of a master plan and its virtual machines.  After you run the last workflow, I get the error "'request failed: not found YUNoWork and perhaps even deleted before commissioning end." when you try to configure a machine to. "

  The workflow of messaging works on its own, and after the execution of the workflow «Assign a state change...» ", I see not updated the property of 'WFStubBuildingMachine' on the action plan.

  Any comments would be greatly appreciated!

  The issue was that endpoint vRO was not added to the vRA.  After you add endpoint and the taking of the inventory, the problem has been resolved.

• Error in the database pending Assembly

  Hi all
  
  OS: Solaris
  DB: 10 G
  
  I am facing the error listed below while I'm creating a database of watch on the same server.
  
  Here are the steps that I followed the same thing.
  
  1. check connectivity.
  2. has created the pfile to DB primary as mentioned below:
  *. DB_BLOCK_SIZE = 8192
  *. OPEN_CURSORS = 300
  *. CURSOR_SHARING = FORCE
  *. BACKGROUND_DUMP_DEST = "/ 11 g/oradata/admin/ettest/bdump"
  *. CORE_DUMP_DEST = ' / 11 g/oradata/admin/ettest/cdump ".
  *. User_dump_dest = ' / 11 g/oradata/admin/ettest/udump ".
  *. CONTROL_FILES =("/11g/oradata/Admin/Data/controlfiles/control01.) CTL"," / 11 g/oradata/Admin/Data/controlfiles/control02. " CTL")
  *. Db_name = ettest
  *. PROCESS = 150
  *. UNDO_MANAGEMENT = AUTO
  *. UNDO_TABLESPACE = undotbs
  * full = '10.2.0.1.0'
  *. STANDBY_FILE_MANAGEMENT = 'AUTO '.
  *. LOG_ARCHIVE_DEST_1 =' location = / 11 g/oradata/archives /'
  *. LOG_ARCHIVE_DEST_STATE_2 = 'ENABLE '.
  *. DB_FILE_NAME_CONVERT ='/ 11 g/oradata/admin/data/data files / ',' / 11 g/oradata_dr/ettestdr/data files /'
  *. LOG_FILE_NAME_CONVERT ='/ 11 newspapers g/oradata/admin/data/files / ',' / 11 g/oradata_dr/ettestdr/redologs /'
  *. STANDBY_ARCHIVE_DEST = ' / 11 g/oradata_dr/ettestdr/dr_archives/ettestdr.
  *. LOG_ARCHIVE_DEST_2 = "SERVICE = ettestdr'"
  *. FAL_SERVER = "ETTESTDR."
  *. FAL_CLIENT = "ETTEST."
  
  3 set the pfile Dr. file:
  
  *. DB_UNIQUE_NAME = ettestdr
  *. DB_BLOCK_SIZE = 8192
  *. OPEN_CURSORS = 300
  *. CURSOR_SHARING = FORCE
  *. BACKGROUND_DUMP_DEST = "/ 11 g/oradata_dr/ettestdr/admin/bdump"
  *. CORE_DUMP_DEST = ' / 11 g/oradata_dr/ettestdr/admin/cdump ".
  *. User_dump_dest = ' / 11 g/oradata_dr/ettestdr/admin/udump ".
  *. CONTROL_FILES =("/11g/oradata_dr/ettestdr/controlfiles/standbycontrolfile.) CTL")
  *. Db_name = ettestdr
  *. PROCESS = 150
  *. UNDO_MANAGEMENT = AUTO
  *. UNDO_TABLESPACE = undotbs
  * full = '10.2.0.1.0'
  *. FAL_SERVER = "ETTEST."
  *. FAL_CLIENT = "ETTESTDR."
  *. STANDBY_FILE_MANAGEMENT = 'AUTO '.
  *. LOG_ARCHIVE_DEST_1 =' location = / 11 g/oradata/archives /'
  *. STANDBY_ARCHIVE_DEST = ' / 11 g/oradata_dr/ettestdr/dr_archives/ettestdr.
  *. LOG_ARCHIVE_DEST_2 = "SERVICE = ettestdr'"
  *. LOG_ARCHIVE_DEST_STATE_2 = 'REPORTER '.
  *. DB_FILE_NAME_CONVERT ='/ 11 g/oradata_dr/ettestdr/data files / ',' / 11 g/oradata/admin/data/data files /'
  *. LOG_FILE_NAME_CONVERT ='/ 11 g/oradata_dr/ettestdr/redologs / ',' / 11 newspapers g/oradata/admin/data/files /'
  
  4. Meanwhile I backed up the database and the same transferd on the location of DR and then I created the standbycontrolfiel using the command on the priamary with login sys server using the command:

  alter database create standby controlfile as ' / path ';

  5. my primary increased using the pfile of said file.
  6.I was also able to put my DR in phase nomount using the pfile above file
  7.i transferred the controlfile to the location appropriate server DR and when I'm putting DR db using:

  alter database base_de_donnees eve of Mount;

  I get the below mentioned error

  SQL > alter database base_de_donnees eve of Mount;
  change the basis of mountain rescue
  *
  ERROR on line 1:
  ORA-01103: the name "ETTEST" in the control of the database file is not "ETTESTDR"

  Please suggest...

  BR
  Sphinx
  
  Published by: $phinx19 on December 12, 2012 05:29

  Try to change standby init. file:

  DB_NAME=ETTEST
  

  Edited by: P. Forstmann on Dec 12. 2012 14:36

• PLSQL utl_file.put_line error after the script running 8 ' e

  Hello
  I wrote a script to export the results of a query to an external file using utl_file.put_line. the script works very well for the first 8 hours.
  
  anonymous block filled
  anonymous block filled
  anonymous block filled
  anonymous block filled
  anonymous block filled
  anonymous block filled
  anonymous block filled
  anonymous block filled
  
  When I run the same script for the 9th time, I got an error message
  
  Error from the 1 in the command line:
  DECLARE
  OutFile utl_file.file_type;
  TYPE rc_a IS REF CURSOR;
  l_rc_a rc_a;
  TELLER_1 INTEGER: = 3;
  ctt1 varchar (2000);
  AA varchar (2000);
  BEGIN
  FOR TELLER_1 IN 3.9
  
  LOOP
  
  OutFile: = utl_file.fopen ('DAT_DIR', 'A1_W' |) TELLER_1 | "_KANS. TXT', 'w');
  
  ctt1: = '
  
  SELECT
  WORP_XW | ''|''||
  D | ''|''||
  V5_AANTAL_KANS | ''|''||
  V5_AVG_KANS | ''|''||
  V6_AANTAL_KANS | ''|''||
  V6_AVG_KANS | ''|''||
  V7_AANTAL_KANS | ''|''||
  V7_AVG_KANS | ''|''||
  V8_AANTAL_KANS | ''|''||
  V8_AVG_KANS | ''|''||
  V9_AANTAL_KANS | ''|''||
  V9_AVG_KANS
  Of
  (
  Select D, V5_AANTAL_KANS, V5_AVG_KANS, V6_AANTAL_KANS, WORP_XW, ROUND(V6_AVG_KANS,6) V6_AVG_KANS ROUND(V5_AVG_KANS,6),
  V7_AANTAL_KANS, V7_AVG_KANS, V8_AANTAL_KANS, ROUND(V8_AVG_KANS,6) V8_AVG_KANS ROUND(V7_AVG_KANS,6),
  V9_AANTAL_KANS, ROUND(V9_AVG_KANS,6) V9_AVG_KANS
  Of
  (
  Select WORP_XW, D, KAN,
  case VERSIE_VX when "V5" then 5 when "V6" when then 6 "V7" when then 7 "V8" when then 8 "V9" then 9 end as VERSIE_VX
  of VMENS. TOEVAL_BASIS_W' | TELLER_1 | »
  
  )
  pivot)
  AVG (KAN) as AVG_KANS,
  COUNT (KAN) AS AANTAL_KANS
  by VERSIE_VX (V5, V6, V7, V8, V9 9 8 7 6 5)
  )
  ORDER BY D
  )';
  
  L_rc_a OPEN FOR ctt1;
  LOOP
  EXTRACTION l_rc_a IN aa;
  EXIT WHEN l_rc_a % NOTFOUND;
  -dbms_output.put_line (aa);
  UTL_FILE.put_line (OutFile, aa, TRUE);
  END LOOP;
  
  END LOOP;
  UTL_FILE.fclose (outfile);
  END;
  Error report:
  ORA-29283: Ongeldige bestandsbewerking/ORA-29283: invalid file operation
  ORA-06512: in 'SYS. UTL_FILE", regel 536
  ORA-29283: Ongeldige bestandsbewerking/ORA-29283: invalid file operation
  ORA-06512: in rule 14
  29283 00000 - "invalid file operation.
  * Cause: An attempt was made to read from a file or a directory which is
  not exist, or the file or directory access was denied by the
  Operating system.
  * Action: Check access privileges to the file and directory on the file system
  and if reading, check that the file exists.
  
  
  The same is true when I use another script writes the results of a query to an external file. Y at - there someone who can tell me why I have an error message after running 8 ' e of this script.
  
  With respect,
  Michiel van Mens

  The second time through the outer loop, it will fail because you try to open a file that is already open. Move your utl_file.fclose statement of before the last "END LOOP '.

• Form error after the apsb12-15 security patch

  I tried this ad in the general area of CF with no response, two weeks ago so I thought I would try here.

  I applied the fix, last week and everything seemed to work, thought everything was fine.

  It turns out that forms which were functioning smoothly suddenly generated error 500 with no indication as to the real issue.

  These forms are simple fill it, create a pdf file, view the file.  Nothing too creative.  With no error message and nothing to tell me what is happening with this, I was forced to unload and hf901 - 00005.jar and back to hf901 - 00003.jar

  It's all working again, but I would really like to have the security patch AND have my forms work.

  Clues?

  sduncanute wrote:

  forms that worked without a hitch suddenly generated error 500 with no indication as to the real issue.

  These forms are simple fill it, create a pdf file, view the file.  Nothing too creative.  With no error message and nothing to tell me what is happening with this, I was forced to unload and hf901 - 00005.jar and back to hf901 - 00003.jar

  It's all working again, but I would really like to have the security patch AND have my forms work.

  Hi sduncanute,

  Yes (I lived exactly the same problem when filling out PDF forms after upgrade to CF10) and there is actually 2 questions here (but the problems do not focus on the PDF).  In short, there is a solution.  I'll explain:

  First issue: Tomcat errors are not written on start.log or exception.log.  That's why you see no error logged.  This is Bug #3126106 and is marked fixed in CF10 (I haven't checked it, but need of.)  This is a note-to-self. = P).  However, I'm not sure if this problem is fixed in CF 9.0.2.

  Second question: as apsb12-15 States:

  -----------

  1. This hotfix has a new setting in ColdFusion, limit of the message parameter. This setting limits the number of parameters in a post request. The default value is 100. If a post request contains several such parameters as specified, the server does not process the request and throws an exception. This process protects against DoS attacks using hash collisions. This setting is different from message size limit (ColdFusion Administrator > settings > maximum size of post data). This setting is not exposed in the console of the ColdFusion administrator. But you can easily change this limit in the file of neo - runtime.xml. See point 5 below.
  2. Customers who want to change the postParameterLimit, go to the {ColdFusion-Home} / lib for Server Installation or {ColdFusion-home} / WEB-INF/cfusion/lib multiserver or J2EE installation. Open the neo - runtime.xml file, after the line

  "100.0"

  Add the line below, and you can change the desired number 100.

  "100.0"

  -----------

  Basically, the Tomcat error (which you don't see) is thrown b/c the form attempts to display more than 100 areas.  So just do as it says above: Add this line in bold and replace 100.0 w / a number high enough to cover the number of fields in your form.

  I note that CF10 allows this setting to be set via the settings page of the CF Admin via the parameter 'Number Maximum of POST request parameters'.

  Thank you

  -Aaron

• C2664 errors after the upgrade of client db 10g and 11g

  Hi, after upgrading customer db 10g and 11g, the compiler gave errors error C2664:
  
  /************************************************************
  AddCxrCh.cpp (2071): error C2664: 'sqlglm': cannot convert parameter 1 from 'char' [513] in ' unsigned char *'
  Types of art are not related. conversion requires reinterpret_cast, C style cast or function-style cast
  make: * [AddCxrCh.obj] error 2
  ************************************************************/
  
  The same code was compiled correctly when you use the db 10g client. I know that I can easily correct this error by changing the code, but there is more than a sqlglm used instructions. I'm looking for a way that will solve the problem by changing the settings of the compiler.
  
  Thank you

  Hello

  There is a change between 10g and 11g. It is described in "Oracle 11g Pro * C nsqlprep Sqlglm issues [ID 860382.1]". The document, you can find on Metalink, aka Oracle Support.

  Herald tiomela
  http://htendam.WordPress.com

• name of the comic in conflict after the database upgrade

  Salvation of DBA
  
  I upgraded the database of 9206 to 10204 successfully.
  but when I'm checking the pmon it showed different SID.
  My actuall SID is PRD but it's showing Prod., for this reason, I am not able to create the xml file in the database layer.
  
  
  Oracle@aqherpdb bdump] $ ps - ef | grep pmon
  Oracle 31816 1 0 12:16? 00:00:00 ora_pmon_prod
  Oracle 31869 31399 0 12:19 pts/3 00:00:00 grep pmon
  
  [oracle@aqherpdb bdump] $
  
  When choosing the database is show the following.
  SQL > select name from v$ database;
  
  NAME
  ---------
  PRD
  
  
  When I am setting up the xml file in the db layer it gives the following error.
  level of adbldxml.pl [oracle@aqherpdb bin] $ perl = db = apps appsuser
  
  From generation of context for db level files...
  Using /s01/prod/proddb/10.2.0/jdk/bin/java JVM to run java programs...
  Password APPS: applications
  
  The log file for this session adbldxml is located at:
  /S01/prod/proddb/10.2.0/appsutil/log/adbldxml_03211248.log
  AC-00013: error: file: /s01/prod/proddb/10.2.0/network/admin/listener.ora is not a valid file, such as the SID database could not be found for connection string: prod
  
  Cannot connect to the database with the settings above, please answer the Questions below
  
  
  Enter the host name of the server: aqherpdb
  
  Enter the Server Port: 1521
  
  Enter the database server SID: PRD
  
  Could not connect to the database: ORA-01034: ORACLE is not available
  ORA-27101: shared memory realm does not exist
  Linux error: 2: no such file or directory
  
  
  Cannot connect to the database with the settings above, please answer the Questions below
  
  
  Enter bin server[aqherpdb]:[oracle@aqherpdb the database host name] $
  
  
  Please guide me to solve the problem above.
  
  Best regards
  Suresh Gelda

  Suresh,

  Follow these steps:

  -Make a backup of the database-level files
  -Run preclone (adpreclone.pl) on the database layer
  -Stop the database and the database listener
  -Change all the names of directory of PROD to PRD
  -Run postclone (adcfgclone.pl) on the basis of data of level and enter the name of the correct database (PRD)
  -Check that the database and the database listener are running

  Kind regards
  Hussein