Error ApplicationPoolException
Hi allI m Learning JDeveloper using "Oracle JDeveloper 10 g manual. I have developed and deployed a JAR file. To run the JAR file, I created a file of commands as below:
-------------------------------------------------------------
off @echo
echo start project
set path = JDEV_HOME/jdk/bin
set the classpath =
java-jar locdept.jar
-------------------------------------------------------------
I tried to run from a command line, but I got the following error:
oracle.jbo.common.ampool.ApplicationPoolException JBO30003
The application is a master form / single detail (loc-dept) unfolding successfully.
Help, please!
Thank you!
Yogini
Hi, in your batch you set the class path to null, which means that there is no path next to the current directory, you run the package.
You must specify the class path to all the pots that the application needs. Start the application in JDev and take a look in the log window. You can find the whole start command.
This includes the necessary class path.
Timo
Tags: Java
Similar Questions
-
Houston-30019 error has occurred
I use 11.1.1.6 ADF.
Some of my users reported errors with Houston-30019. Here is an example of the errors:
oracle.jbo.common.ampool.ApplicationPoolException: Houston-30019: a State not available cookie is detected while trying to use a cookie to request vTs7TfMCdnrPR6plxtB2bq5YsrYbKLKFxPG7C911rJzpq7k1dv04!-1627267109! 1402932290251, w1sf56q2h_2_ArAMDataControl of the session.
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:598)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)
I migrated just my database of the ADF App of a 'standard' for an exadata host (this info is not relevant).
I tried to look for a possible solution, without success. Any suggestion to solve this problem would be appreciated.
Thank you.
AhmadinHi all
Thanks for the reply. After further investigation, I discovered that the listener of the (SCAN) database has a default timeout of 120 seconds. Although the app module has the default value of 10 minutes. On the side of WLS data source, it has been configured to not test the connection reserved before the connection to the app module when it needs a connection. There are four options for this problem, but I chose to configure the WLS data source to test the connection to module app for every 120 seconds. So far, it has stabilized.
-
Uninstall software update Apple says error in seller contact package package unstaller
Try to get itunes working to make a backup of my faulty iphone before repair.
First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.
Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.
Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.
Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
I'm new to apple and get a syntax error when you use SUMIF. In my table, I just need column F to test the value of column E. If it is greater than 0, then divide by 20. Thank you!
In cell F1
= E1/if(E1>0, 20, 1)
fill down as needed
-
An error in this Applescript that I can't understand
Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:
runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.
Thanks for any help with this problem,
Mike.
property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary
property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}
the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")
the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")
game runScript to 1
tell application "System events".
the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)
the value allVolumes to name of every element of disc of rootVolumes
the value numofallVolumes to the County of allVolumes
Repeat with the present book in allVolumes
say application 'Finder '.
if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then
if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2
runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted
runScript If = 2 then
try
duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume
on error number errorNumber errorMessage
_error value of errorMessage
_errorNum the value to errorNumber
If errorNumber is -15267 then
display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10
If the returned button of result is 'No' then
Error number-128
on the other
If the result is 'OK' or back button gave up lead and then of
eject the present book
display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5
return
end if
end if
end if
end try
Try
duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume
on error number errorNumber errorMessage
_error value of errorMessage
_errorNum the value to errorNumber
If errorNumber is -15267 then
display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10
If the returned button of result is 'No' then
Error number-128
on the other
If the result is 'OK' or back button gave up lead and then of
eject the present book
display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5
return
end if
end if
end if
end try
display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10
If the returned button of result is 'No' then
Error number-128
on the other
If the button returned of result is "OK" or gave up a result then ejection of the this book
display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5
end if
end if
end if
end say
end Repeat
end say
The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:
If the present book is in the ignoredVolumes then
game runScript to 1
on the other
if (the present book as text is not '. ') DS_Store') then
if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2
end if
end if
Of course, you need to remove a "end if' the end of the script.
-
error message when try to sync the iPhone, "invalid response from the device?
What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?
-What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.
-
Hello
I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.
I wanted to know if there is a lasting solution to this problem.
I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.
Hello PavanGJ,
Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.
Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:
OS X El Capitan: If you have problems with startup items
You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.
You can also test the issue in a new user account.
How to test a question in another account on your Mac - Apple Support
Let us know if that helps.
Take care!
-
A fact error 4014 showing each time after all the steps
One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).
I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?
Thank you for your help and appreciate it.
I found the solution. Just type here for others with the same problem to solve their problems.
While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.
Thank you for your support and more.
-
Playgrounds are learning to code 1 download error
I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift. Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL. I uninstalled and reinstalled the soft playgrounds several times. Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well. How can I bypass or fix this error and get the first playground of lesson?
Finally, the playing field is downloaded successfully!
-
Error Java Run After downloading the new Sierra
Java is up to date and I get this error message. A couple of times, I have "updated" restarted. Still happens.
Hi cjshrad,
Thank you for contributing to the communities of Apple Support. I see in your message you receive a Java error after upgrade to Sierra on your Mac. I'd be happy to help with this!
First of all, try to install the Java for OS X package found here:
Download Java for OS X 2015-001
The next step, if you still see this error, I recommend that you completely uninstall Java from your Mac by following the steps listed here:
How to uninstall Java on my Mac?
Once you're done, use this link to download and install the latest version of Java for your Mac:
Download Java for your Mac - Apple SupportTake care!
-
"error recovery main area".
Hello
I can not access my old video files of my 6 16 GB iPhone, I'm using iOS 10. When I try to open the videos that I always meet the message 'area main-fetching error' I can't specify when this problem started, but I'm sure it was good when I was with iOS 9.3.3 However, recently filmed videos works perfectly.
Same thing here. I bought the new iphone and took the backup from your old phone, but the videos do not work.
-
Am having a problem of signing in the App Store and iCloud on Preferences system on my MacBook Pro, getting an error response whenever I tried signing in.
Here are the errors:
- Are you sure that you typed your password correctly 100%? (sry, but that would be classic
- have you tried to reset your password?
-
On my iMac (late 2015) El Captain 10.11.6 this morning I started getting this error on the log in "a tracking file for CoreTelephony operation failed, perhaps you miss disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"
Can someone tell me how to fix it? Some of my apps are now crashing.
M
I have also this problem too and the same day
-
I got this error:
"CoreTelephony Trace file error
A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
Software does not, especially of photoshop...Any ideas?
Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.
-
On macOS Sierra - Parallels Desktop 12 - error unable to load Parallels driver - error ID 352
I have updated at 10.12 some weeks ago, with no problems.
I used 10 Parallels and put Windows 7 access every day. My Mac software was 100% up-to-date.
After a few weeks, I started Windows and Parallels showed the error "Failed to load the driver" and KB Parallels, I found that I may need to upgrade. As I was planning to upgrade anyway, I upgraded to Parallels 12 and got the same error.
I contacted Parallels support - they responded with this:
Failed to load Parallels driver. Problem ID: 352
Cause
The problem is in the bundle /System/Library/Extensions/IOPCIFamily.kext from Apple. In the bundle's info.plist is damaged due to some reasons.
Resolution
If please contact Apple Support team and send them system.log and corrupt /System/Library/Extensions/IOPCIFamily.kext/Info.plist.
The person wrote that if Apple can't help, we will try to help "."
Is anyone able to help please?
Thank you.
It is a user to user forum, not a team of Apple Support forum. In any event, it sounds like a problem of Parallels as it is unlikely that multiple versions of the operating system have defective or damaged kernel extensions.
For what it's worth, I use Parallels 11 without problem on macOS Sierra to access Windows 2000, Windows XP, Windows XP64, Windows 7 and Windows 10 of virtual machines. I think you should go back to parallels Support. I've avoided Parallels 12 because of all the problems users are reporting
Maybe you are looking for
-
How can I turn off the touchpad of my DV7-6116?
Operating system is Win 7-64
-
Replacement AC adapter for M300?
Hi- I have a M300 and I want an extra adapter for it to not have to carry it with the laptop. What is the model number for the adapter AC which are compatible with this laptop? P.S the compatibility against each adapter info is pretty useless. --Chri
-
Need some drivers WXP 64 bit for my Satellite C855 1GN
Hello Now I have 64-bit of Windows XP Home edition running on my Satellite C855 1GN.Could someone find a link for the wireless, chipset and audio if possible? Thank you very much
-
Message: The security of Windows service cannot be started
I get a pop-up windows security problems: the Windows security service cannot be started How should I do, please? Moved from Community Participation Original title: windows security
-
Pavilion 25cw: monitor for laptop connection
I just bought a new HP laptop, 360 want I use two monitors. I have a HP Pavilion 25cw and bought a C of Type USB to VGA. I have connected this to the monitor and the computer. The computer makes a noise as if she recognized the connection, but the