Error: Assembly window Base Version 3.0.0.0 in the Global Assembly Cache (GAC) necessary first when trying to install a scanner.

Similar Questions

• Error - "the CD key you entered is invalid" when trying to install the Windows XP computer.

  Original title: Windows XP CD Key can expire?

  My old machine with Windows XP installed should be trashed. I want to install Windows XP on a netbook Eee. The Win XP CD is a CR - ROM with the retail CD. It was given by my former neighbor who worked at Microsoft and purchased at a reduced price.

  Trying to install Windows XP, I had pop-up window "you entered the CD key is not valid. I installed Windows XP Home edition using this CD key several times on my old machine, to clean the operating system after a certain period of malware infection. The CD key is certainly valid.

  So what's happening? The CD key can expire after a certain number of years? Note that what's happening during the initial installation - before the first logon. There is no internet connection. So it is not possible for the installation check if this CD key is used elsewhere.

  I tried several times. Whenever I got this error in the installation step "installation of Windows.

  The message itself is that I quoted above "the CD key you have entered is not valid.

  These are the typical reasons, you would get such a message:

  1. the user enters in the key not associated with the retail disk but another key, usually on top of the COST of the PC sticker.

  2. at least one of the characters has been entered incorrectly. This could be because of user error or a faulty keyboard.

  Just to be sure: you use a real retail CD? Or is it a generic OEM CD that was bought in a store?

  A way around this problem is to use an XP SP3 integrated in a installation CD. If your CD is SP2 or earlier, you can create one on the scale of SP3, using a process called "slipstreaming". Then everything just when it's time to enter your product key, don't! Then you will see this window:

  http://ethertubes.com/wp-content/uploads/WinXPSP3-2.PNG

  You will have 30 days to activate (and enter the product key). This page should help:

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

  Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

  Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows

• Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

  Initial version of updated title: windows

  My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

  Hello

  Have you made changes on the computer before this problem?

  Method 1:

   

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Try the procedure described in the following article and check the status of the issue.

  http://support.Microsoft.com/kb/822798

  Restart the computer and check it please for windows update.

  Hope the above information is helpful.

• Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error."

  Original title: error code 88982F04

  Received this error code when trying to install win 10.   the message was ' ' has no 1 update "and"windows update has encountered an unknown error."  I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC.  Can someone please help with an answer.

  Thank you

  Delete C:\$WINDOWS.~BT

  Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

  

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I fix it

  Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I solve this problem? Thank you.

  Hi JFO58,

  I recommend you to run on your system cleaning tool:Download Adobe Reader and Acrobat tool - Adobe Labs

  Later, try to install reader again by using the following link: Adobe Acrobat Reader DC install for all versions

  Kind regards
  Rahul

• Context: MSI Action failed, 0xC0070643 error code when trying to install AVG anti-virus program

  Original title: context: MSI Action failed

  Hello: I received the 0xC0070643 error code when trying to install the AVG anti-virus program.   What can I do to fix this problem, so I have AVG on my computer?   I thank really all those who are knowledgeable enough to help me straighten out it.

  Thanks again

  Daphna

  Hello
  
  1. are you able to install other applications successfully?

  According to my research, this error message appears if you have traces of a previous installation of the AVG software.

  Download the AVG remover to remove the previous version and then try the installation again and check.
  http://www.Avg.com/us-en/utilities

  The link below also discuss the matter even.
  http://forums.Avg.com/au-en/AVG-Free-Forum?sec=thread&Act=show&ID=114995

  Hope this helps

• "Error 1310" error writing to the file: c:\config.msi\f2046.rbf "while trying to install Adobe.

  Atitle: how to fix error 1310?

  We have vista and I get this error when I try to download adobe reader: 1310.error error writing to the file: c:\config.msi\f2046.rbf. How can I fix this error? Also had trouble to update old adobe, so I uninstalled, so now I have no adobe reader.

  Hello

  -Is the issue limited only when trying to install Adobe programs?
  -Did you do changes on the computer before this problem?
   
  Method 1: Run the FIXIT from Microsoft from the link below and check if the problem persists.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
   
  Method 2: I also suggest you to see the link below and check if that helps.
  Update errors. Acrobat, Reader | Windows
  http://helpx.Adobe.com/Acrobat/KB/update-errors-Acrobat-Reader-Windows.html
   
  Hope this information helps.

• Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer is located and ready to install, I get a PnPx device then error

  Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer, wireless printer is ready to install I get a PnPx device Microsoft authorization. Runs like it is installing then error is presented. I tried fixit did not work... Frustrated

  You could settle on a previous installation. Try this:

  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it. Now you can check your printer if its work. If this does not work, please indicate your model of printer on your next reply.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• How can you correct error code 800 F082F I get when trying to install SP1?

  How can you correct error code 800 F082F I get when trying to install SP1?

  Hello

  1. you are trying to install service pack 1 through Windows Update?
  2. What is the exact error message?

  Cause of the error 800F082F: cannot install this update with the other updates. Therefore, if you have already installed other updates without rebooting, and then you try to install this update, you may receive error 800F082F. To resolve this issue, restart your computer, and then install this update again.

  If the problem still persists, then download SP1 from the Microsoft Download Center and install it.
  For 32-bit computers: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=30
  For 64-bit computers: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21299

• I get the error code 80070020 when trying to install (KB2507618).

  I have Vista Home Premium. I get the error code 80070020 when trying to install (KB2507618).

  I tried all the troubleshooting steps below and still no luck. I installed some other updates, today, August 19, 2011.

  Do I need to KB2507618 that came out in April of this year, or is it is replaced by an other update and or cumulative update?

  • Summary
  • Symptoms of the problem
  • CAUSE
  • Methods to solve the problem
    • Method 1: Restart your computer and install updates
    • Method 2: Start the computer in safe mode with networking support and install updates
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
  • Advanced Troubleshooting
    • Method 3: Perform a clean boot of the computer and then install the update
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
    • Method 4: Temporarily disable spyware and antivirus software
    • Method 5: Temporarily disable firewalls
      • Disable Windows Firewall in Windows 2000, Windows XP and Windows Server 2003
      • Turn off the firewall in Windows Vista, in Windows Server 2008, or in Windows 7

  Read the little free support in the Article:
  http://support.Microsoft.com/kb/2507618

• 1500 error when trying to install Java

  I tried to install Java a few hours ago and received the error 1500: another installation is in progress. You must complete before that installation before continuing this one.

  So I rebooted my laptop thought that would settle it, but he did not. I noticed this 1500 error when trying to install Skype, thinking he was not on my computer and Skype. I can install some programs, but not anything I need (small games ect.)

  I'm not sure if this has anything to do with it, but when I start my laptop I get a window saying windows installer install and it will away.a a few minutes after I things about installing dell and it's installation (I have no idea what) and then the loading bar fills , another pop up (don't know exactly what he says) loading bar goes down and I cancel it.

  any help would be appreciated.

  I finished a process named msiexec.exe and retried the download and (until now it works) but I got a warning window saying "User SYSTEM has previously launched an installation for the Dell support center product. This user should run this setup before you can use the product. your current installation will now continue. "I clicked ok on that and got another saying"Error 1704.An installation for Dell Support Center is currently suspended. You must undo the changes made by that installation to continue. You want to undo these changes? "I clicked ok and the installation of Java is now in limbo.

  Hi gughead,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Follow the instructions below to start the Windows service install.

  1. click on start.

  2. type services.msc and press ENTER.

  3. Locate the installer of Windows.

  4. make a right click on it and start the service.

  5. change the auto type of properties.

  Check whether the problem is resolved.

  Method 2:

  Let us try to install Windows Installer 4.5 and check if the problem is resolved.

  Download and install Windows Installer 4.5 from the link below.

  Windows Installer 4.5 is available

  http://support.Microsoft.com/default.aspx/KB/942288

  You can check the link below.

  http://Java.com/en/download/help/6000070300.XML

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• get a 646 error code when trying to install updatesfor Securty Excel 2007 - KB973593, Microsoft junk email Filter (KB977839); Microsoft Word 2007 (KB974561) and Microsoft Office System (KB973704)

  get a 646 error code when trying to install updatesfor Securty Excel 2007 - KB973593, Microsoft junk email Filter (KB977839); Microsoft Word 2007 (KB974561) and Microsoft Office System (KB973704)

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > manual download them.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Several errors when trying to install ANY software.

  For the last few weeks I had several problems when trying to install the software PC games, software, whether antivirus or other software with an .exe installer. A host of mistakes will jump to the top which prevents me to carry out (or) the installation process.

  For example:
  When you try to install Avast Antivirus I get - "an error 31 (0000001F) occurred." "Done last operation was: temp directory.
  When you try to install Microsoft Security Essentials I get - "can't find a volume for the extraction of the file. Make sure you have the appropriate permissions. »
  When you try to install SUPERAntiSpyware I get - "the installation failed. Error reading configuration data. »
  When you try to install League of Legends or some other players Setup is not yet open. Nothing happens.
  When you try to install another game I had - "Setup could not create the directory"C:\Users\owner\AppData\Local\Temp\is-I1SGM.tmp"
  These errors occur when I run the .exe as administrator or not, in SafeMode with networking or not. It seems to be a problem with a temporary folder, the permissions of the user or something like that. Would someone kindly help me out here? I uninstalled MSE before moving to Avast yesterday, but now I can not install MSE or Avast so I'm stuck with no antivirus. Help!
  Useful info:
  Windows 7 Home Premium
  64 bit
  Service Pack 1
  Any other necessary information is provided quickly. Thank you!
   

  Hello

  I'm sorry that BootMedic did not work for you. I figured that if you can download it, there is the live CD when you it burned to a disc. But if you can't do that much, I'm afraid that the only solution is to reinstall Windows 7 directly, for example, of your hidden partition or DVD of Windows system, depending on what you have.

  Back up your data and programs for an external drive or USB flash drive and go from there. Do you know how to do a clean install of Windows, or do you need me to walk you through it? If you need help I need to know your computer type, brand and model, and if you have a partition system or DVD disc.

  Yet once, my apologies that it didn't work and I would like to know if not how can I help in the recovery process.

  Kind regards

  BearPup