Error blue screen "Stop 0x0000003E".

Similar Questions

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• service pack 2 Installation error blue screen stop 0 x 0000003

  Hello

  I was unable to download the Update Service Pack 2 on my Windows Vista forever.  Get the message every time I start my computer something like "error on blue screen Stop 0 x 0000003.  When I tried to download the 2 means of redress, both gave me the screens that says 'this update not supported'.  How can I fix it?

  Search for updates of hardware of your computer - including the system BIOS manufacturer.  Do not use all facilities built to perform the check - in fact visit the web page of your computer make & model and update the drivers for your system.

  You can also try this:
  How to reset the Windows Update components?

  (Try first the value default - restart and try your download again.  If this does not work - try the aggressive - restart and try your download again.)

• Error blue screen Stop: c000021a {fatal system error}

  I am unable to get my computer after the Windows XP screen without a screen blue, continues to restart.

  I was able to get to the Windows Advanced Options menu and was able to "Disable automatic restart in the event of system failure" to get the full error message.
  Stop: c000021a {fatal system error}
  The Session Manager initialization system process ended unexpectedly with the State 0xc000026c (0x00000000 0x00000000).
  The system has been shut down.

  Twice I was able to get in "Safe Mode", words ran across the screen as they will normally in "Safe Mode", but both times the computer restarted again.

  I tried to launch a repair several times with a borrowed Windows XP disc, every time after the repair, he says that the system contained errors, but had been repaired, but the problem persists, just guard computer restart, stop with the error again in a loop.  Hope this helps.

  CHKDSK c: /p detects errors, I ran this command before asking for help on this site... ut as an update... I contacted Microsoft, given that the problem was an update... I received a new operating system CD, crossed the same repair with the new CD with Microsoft... Talked to five different people... Kings different phone calls... the Division to the top to the box start... BSOD... But I won't give up easily... I'm back in my BACK screen... nd was finally able to repair the operating system... The problem was due to the CD have installed IE6 repair who wrote too my IE9... including the confusion in the trunk-to the top.... went on the computer is not not able to recognize Windows Explorer... etc etc etc.

  Nine days later... I'm back running... Phew!

  Thanks for trying to help...

  I work on computers in 10 - 20 Sep... It was rough...

• Error blue screen - Stop: 0x0000000A (0 x 00000001, 0x81AIEFE9, 0 x 00000054, 0x0000001B)

  I recently had a lot of blue screen errors and I took a lot of steps in my attempt to deal with them.  I have updated and uninstalled the drivers who had the yellow exclammation mark next to them in the Device Manager.  I ran Microsoft Memory Diagnostic tool.  I went through all the steps to repair the windows that are arranged in the executable file for Tweaking.com.  However, I'll always have this annoying problem.  What I really want to get to is the root of the problem.  I want to know if it's a hardware problem, so that I can replace the parts that I need to replace, or be it a software problem.  Here is some info about my computer: I'm currently connected to the internet via a cable modem and that modem is connected to my computer via a USB cable because my NETWORK card is down.  I have already disabled the CARD driver and have properly installed the drivers for the modem.  The blue screen issue occurs very randomly.  I've already gotten two technicians from Microsoft support and they were not able to provide any real indication of the problem.  Please, I beg you!  I'm desperate to get to the bottom of this!

  Information on my computer:
  Windows Vista Edition Home Premium
  Service Pack 2 (I got all the updates of Windows)
  Processor: Intel Premium Dual CPU E2140 @1. 60 GHz
  (Vivid RAM) memory: 4.00 GB
  32-bit operating system
  Compaq Presario SR5250NX
  Blue screen error information:
  Stop unexpectedly on 27/04/2012 @ 14:40
  Signature of the problem

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)

  Mini042712 - 01.dmp

  SysData. XML

  Version.txt

  See a temporary copy of these files

  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem

  BCCode: a

  BCP1: 00000054

  BCP2: 0000001 B

  BCP3: 00000001

  BCP4: 81A1EFE9

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Information about the server: cbe24a1e-1cde-4419-8436-2034621b48bc

  Hello

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Since you re-installed Windows that indicates the hardware problem (near 100%) with
  possibilities of tiny that BIOS, low-level chipset or other low load drivers drivers are in
  play (such as video).

  Make sure that the integrated NETWORK interface is disabled in the BIOS (if possible) and/or Device Manager.

  Check with Compaq Support, their drivers and documentation online and ask for their
  Forums about known problems.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/|

  Remove ALL power and then reconnect the cables (at both ends where possible), memory and cards
  -in fact, remove and replace - do not just tight. Clean the dust bunnies, clear the vents,
  and make sure the fans are working. Try adding a small fan blowing into the socket to reduce the
  heat of luck is a part of the question (heat associated with does not always mean too much heat as one
  component may be too sensitive to even normal levels of heat).

  You checked the memory, but the tests detect memory errors such as small speed
  differences between identical memory modules. We therefore often swap memory
  modules and out in different combinations and patterns.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  Remove any devices that you can to make the system as simple as possible to see if this
  an impact on the issues.

  Check with a real computer store (one that makes its own service internal on Compaq and)
  No leeks and peaks at a Best Buy or other stores) or Support of Compaq.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error blue screen: STOP: 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED

  original title: blue screen with the error: "STOP: 0x0000008E (0xC000001D, 0 x 82850572, 0x9E204038, 0x00000000)"»

  Hello everyone,

  It has been more than a week I tried to re - install my computer: ACER9802AWKMi after several months of support with blue screen apearing errors whenever there is more than one program open :-(
  So I started with a recovery disk, but the problem was still there.  The computer came with XP Home Edition and I got an upgrade to Vista (all original stuff) with all updates (SP1 and 2 and everything else updates)
  Now, every time I go on the internet: especially no problem, but if I want to play a game (online) full screen, after a few minutes:
  Yes: blue screen with messages such as
  STOP: 0X0000008E (0XC000001D, 0 X 82850572, 0X9E204038, 0X00000000)
  STOP: 0x0000007F (0x00000008, 0x8013F000, 0 x 00000000, 0 x 00000000) or
  PFN_LIST_CORRUPT or
  something with the memory of the BIOS (which I have to remove cache or mirror) witch I tried to do, but not found in the BIOS SetUp (when start PC press F2)

  Whenever I get another message :-(

  I tried with FixIt, fact CHKDSK - CHKDSK F + CHKDSK F R
  I have also run Everest to have all the necessary stuff... so if you need it...

  If anyone has a sollution, I would be very happy to hear it.

  TX much

  In the mean time brands more than 13,000,000 errors:(et toujours obtient plus élevé.)  Of course I'm not every minute in front of my screen (sometimes I work too: the job from 9 to 5, you know)

  Hi Sabine,.

  This means that the RAM is broken or damaged. If you receive error messages, you can stop the execution of memtest86 +.

  Ask someone who knew a little technical to open the laptop and check out how many RAM modules there. If it has a single module, buy a new RAM module.

  If she has more modules, remove other modules, so that you don't have 1 module of RAM left. Now run the test for each RAM module again (only install 1 module at the same time) to check if all are damaged or 1.

  If you have discovered how many RAM modules is broken, buy new RAM

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 7 clean install fails with ACPI.sys and error blue screen stop: 0x0000007E.

  I'm trying to do a clean install of windows 7 Professional (32-bit) on my laptop ASUS X61SL. Initially there was Vista Home Premium (32-bit) running on this laptop.

  After the start of the boot and windows 7 by loading files and starting windows comes the blue screen saying:

  STOP: 0x0000007E (0xC0000420, 0x8EB256C6, 0x8A386640; ox8A386170)
  ACPI.sys - address 8EB256C6 base at 8EAD7000, Datestamp 4CE78F21
  I tried an update of the BIOS already and a full erase of the disk which has been recommended by the ASUS support. Nothing worked, and not even the ASUS support has other ideas how to get Windows 7 to run.

  OK, how much RAM have you?

  I found this information:

  However, I remembered seeing something on the Internet about Microsoft 64-bit being unhappy with 4 GB of ram during the installation process of the systems... .then I got 2 GB of ram and the installation went OK! I will give the memory later.

  Source:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-clean-install-of-win-7-fails-with-acpisys-and/edca086c-D798-4b78-805d-301dcc8535a0

  I know - you try to install the Win7 SP1 32 bit only, but you can try it.

  LC

• I have an error blue screen - Stop: c000021A (fatal system error) status 0f 0x000004t

  What is the status of Stop: c000021A (fatal system error) 0f 0x000004t.07 that it is a blue error screen that is displayed when the computer tries to boo

  Hello

  You can check this link:

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

• WoW error blue screen stop 0 x 00000116

  After you download the Cata, I was playing WoW. updated and now whenever I go to a certain place, it gives me a blue error screen.  my computer info is:                                                                                                                                                         Manufacturer: Lenovo
  Model: Lenovo Vista PC
  Processor: Pentium Dual-Core CPU E5200 @ 2.50 GHz-2.5 GHz
  (Vivid RAM) memory: 4.00 GB
  System type: 32-bit operating system.
  Graphics card: Intel (r) G33/G31 Express Chipset Family (I don't know if it's the graphics card).

  I think I got some of the error and I think that it is error Stop 0 x 00000116 (0x85D84D08, 0x8FADF550, 0x0000000D 0x0000000D)
  I think so. It may be bad, but the first part with the 0 x 00000116 is right for you.

  From what I've read that you can try to remove the other drivers, but that's my only.  I reinstalled and tried the update, but changed nothing.  I also tried secure boot and so on. If there is anything I can do to just say. and if the only thing I can do is get a new driver, so I have no idea how to say if drivers are compatible with my computer and so on for if you have ideas on such replacement I could get, it would be very useful.

  Hello

  There have been several reports of this error of those who play wow so don't forget to check
  support WOW with their forums.

  Re-install the latest drivers and if that does not help then go back to a version prior to
  see if that helps. Also check with the WOW support and their forums, as you're probably not
  the only one with this problem.

  Check with Lenovo Support, documentation and online drivers. Go to Lenovo and look
  for the drivers manually. If the video device is supported by its author (for example, Intel, Nvidia,
  ATI and other) check with their website for drivers and ask in their forums (if any).

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  Intel - downloads
  http://Downloadcenter.Intel.com/

  There are other causes of this BSOD but it's usually the drivers.

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue error screen "Stop 0x0000003E" when you install SP2 to Vista

  Error blue screen "Stop 0x0000003E" appears when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2 on a computer with certain multiple processors

  * original title - Vaio VGN-Z870TG appears fornuis Al este error referred al Windows Vista cuando Máquina opera en Windows 7__¿Que debo hacer? *

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open IE8 32 bit (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• A blue screen (Stop error) has been reported. The message contains the error details.

  Hello Hello.
  can someone help me why this error is coming.
  I use a laptop lenovo.
  Error details:
  product-windows stytem, operating
  ID-1003,
  source-system error,
  version - 5.2.
  sysmbolicname-ER_KRNLCRASH_LOG,
  error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1

  A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

  Concerning

  Chandra Murali

  .net developer,

  HYD.

  Hi Murali,

  ·         What is the random question?

  Try the following.

  Method 1: Check for memory questions

  Microsoft Online Crash Analysis - windiag

  Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.

• Blue screen stop: c00002 / a (fatal system error)

  Blue screen stop: c00002 / a (fatal system error)

  the windows login process ended unexpectedly with status 0xc0000005 (0x00000000 0x00000000) the system has been shut down.

  I have dell windows XP home service Pack 3 computer.

  I had a problem with security thinkpoint and called microsoft and after they had me take measures running a couple different scanshttp://live.sunbeltsoftware.com/download VIPRERescue andwww.eset.com virus more microsoft had click me start, run and type in the press temp ok delete all files, run and type prefetch and delete all the files, run %Temp% remove all the files then empty the trash restart and everything should be ok.

  the computer starts fine until I stopped and tried it begins again, same blue screen problem, I went to safe mode and don't start running and temp, prefetch and %Temp% remove empty the Recycle Bin and restart and computer ran fine, after the 2nd screen blue again.

  I'm now working on the computer and if I press start, run make temp, prefetch and % temp % and delete and empty the trash before turn me computer turned off it will start very well, if I don't do the temp, prefetch and %Temp% steps that I will get the blue screen at the start.

  How can I solve this problem and get rid of the blue screen for good message?

  Hi C_O_A_C_H_11,

  Perform the last known good and then restart your computer and check if you receive the error message. You can check the link below:

  How to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Blue screen (STOP) errors that cause Windows Vista to shut down (blue screen of death)

  I get this on a blue screen stop code and I can't find what this code means someone can help me please v

  00000101 0 x (0 x 0000000000000061, 0 x 0000000000000000, 0xffff98000c6e180, 0 x 0000000000000001

  Best advice I've seen on this error (here: http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 )
  What you are looking for will be in one of the following categories:

  (a) the BIOS bug
  (b) a pilot whose activity is at the origin of the processor target lock
  (c) a defect in hardware (temperature, voltage, dust, RFI, pure and simple borkedness...)? I also wonder about default CPU)
  Therefore, check the drivers
  Then check the inside of the species (temperature, voltage, dust, etc.).
  Then run tests of stress of material

  Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
  Try this free stress test: OSS - GIMPS

  CPU Stress Tests:
  Just do 1 or 2 tests in most circumstances. I have not used one of these tests myself, so I listed everything I could find.
  - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19182&lang=eng
  - http://7byte.com/index.php?page=hotcpu
  - http://www.7byte.com/index.php?page=burnin64
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://www.fossiltoys.com/cpuload.html
  - http://www.pcworld.com/downloads/file/fid, 7146-order, 1 page, 1-c, alldownloads/description.html
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://majorgeeks.com/CPU_Stability_Test_d215.html
  - http://www.xtremesystems.org/forums/showthread.php?t=201670
  -l' or the tests suggested at this link are bootable: http://www.techsupportforum.com/forums/f15/headless-cpu-stress-testing-393435.html#post2232929

  Then try to replace parts.
  Then look for the version of your BIOS to see what changes have been made.

  Text courtesy of http://www.carrona.org/ Usasma

• Stop error code blue screen: STOP: 0x000000F5

  I am a student and I take 2 of my classes online.  As soon as I decided to take my classes online my computer starts to work again. I can't afford to take it to the cause of Squad of geek I'm behind in my classes. It happened already, blue screens, and I was about to start my classes then instead of he sends to a diagnosis, I thought I could solve the problem by simply installing a new hard drive. If that's what I did. About a week later, I got another blue screen and since I had just put the new hard drive and a warranty, I got and they fixed, does not really enter in what the problem was. Now about a month has passed and the dreaded blue screen is back. This time that I wrote all the error codes and everything I did to try to solve the problem. I guess only through diagnostic tests, and to install a new hard drive was a mistake, given that I spent $260 and the problem is not resolved. In any case, I'm sorry I got carried away with the details, but I'm desperate! Last night, I had the first blue screen and read it.  The usual "a problem has been detected and windows were shut down to prevent damage to your computer.

  Then he said (and this was the first and only time I've seen this message) "run a system diagnostic utility supplied by your hardware manufacturer. In particular, to achieve a memory check, and check memory faulty or incompatible. Try to change your video card. "And then the usual"disable any hardware or drivers and software, etc... Technical information: STOP: 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000).  Then, I started it in safe mode w/network, ran windows memory diagnostic tool and it found nothing. Then I tried Microsoft fix google and I change video card. Ending me upgoing in the properties of my video card to find out information about the pilot. Somehow, I ended up on Intel' support and found a newer driver for my video card, so I downloaded it. But then I got the blue screen again. This time it read; "A problem has been detected etc..  FLTMGR_FILE_SYSTEM with Tech Info STOP: 0x000000F5 (0x0000006E, 0x87AD62F8, 0x87AD62C8, 0x00000000). Can you please tell me what is happening so I can solve this problem once and for all! Or should I just invest in a new computer?   Thank you for your time.

  Hello

  Since this has happened material suspect in particular hard drive and anything
  report (such as the motherboard and wiring) - also, malware or same antivirus/anti -.
  spyware/security programs.

  ------------------------------------

  You have ZoneAlarm or any 3rd party firewall installed? If so, this could be the cause.
  Other antivirus/security programs could be at least partially responsible.

  This fix "could" apply however do not use if you are quite safe.

  Two drivers of platform using WFP (Windows Filtering) causes a computer crash when the
  computer running Windows Vista, Windows 7 or Windows Server 2008
  http://support.Microsoft.com/kb/979278

  Check also:

  The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
  http://support.Microsoft.com/kb/137539

  ===========================================================

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------

  BCCode: 0x0000007f 7F

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, while there are
  other causes. Power electric low could also lead to this. Use the troubleshooters above and below
  and when you get to the drivers and memory sections refer to my next message below and then
  return if necessary troubleshooting services

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if not
  (remove the cables and the resettlement of help them to eliminate minor corrosion).

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or your
  Support of the machine system.

  ----------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or adouble foul(an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
  • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
  • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
  • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

  CAUSE

  0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

  Solve the problem

  Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

  The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

  Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

  Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menuof Advanced Options , select thelast known good Configuration option. This option is most effective when you add a single driver or service at a time.

  Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

  If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

  Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
  * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

  -----------------------------------------------------------------------------------------------------------------------

  BCCode: F5 0x000000F5

  The most common cause of this problem is a problem of hard disk or hardware connected to the drive
  as the mother/controller card and cabling. Other possible causes include antispyware/antivirus/security programs.

  Bug Check 0xF5: FLTMGR_FILE_SYSTEM

  Bug FLTMGR_FILE_SYSTEM control has a value of 0x000000F5. This indicates that a fatal error has occurred in the Filter Manager.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support.
  To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  FLTMGR_FILE_SYSTEM settings

  The following settings are displayed on the blue screen. Parameter 1 indicates the type of violation. The meaning of the other parameters depends on the value of parameter 1.

  See this link for the parameters or the Faultwire link below.
  http://msdn.Microsoft.com/en-us/library/ff560383 (v = VS. 85) .aspx

  Cause

  The cause of the problem is indicated by the value of parameter 1. See the table in the settings section.

  
  Resolution

  If parameter 1 is 0 x 66, you can debug this problem by checking that your minifilter driver recorded a reminder after the operation for this operation. The current operation are in the structure of recall data. (See parameter 2). Use of the ! fltkd.cbd the debugger extension.

  If parameter 1 is 0 x 67, you must verify that you do not have a leak pool unpaginated somewhere in the system.

  If parameter 1 is equal to 0x6A, make sure that your minifilter driver does not refer to this file object (see parameter 2) to get a handle at any time during the processing of your minifilter of this operation.

  If parameter 1 is equal to 0x6B or 0x6C, then a State internal unrecoverable error has occurred causing the operating system bug control.

  If parameter 1 is equal to 0x6D, make sure that your minifilter driver does not call FltReleaseContext too many times the specific context (see parameter 2).

  If parameter 1 is equal to 0x6E, make sure your minifilter driver does not call FltReferenceContext after the context has been removed (see parameter 2).

  BCCode: F5 0x000000F5<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/FLTMGR-file-system-0x000000F5-* 1242.html

  ============================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Help blue screen Stop error

  If it received Blue error screen and auto restart past since I did the sp1 update. I have Windows Vista-32 and the error I get is:

  Stop: 0x0000008E (0xc0000005, 0x93F042F9, 0X92CD3C50, 0x00000000)

  Win32k.sys - address 93F042F9 base at 93E00000, DateStamp 4549aea2

  I need help here. I'm going nuts trying to figure this out. I would appreciate your help. Thank you.

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
  You must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Make sure that all new equipment installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. Also, clear or
  remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use
  Safe mode to rename or to delete the faulty driver. If the driver is used as part of the system startup
  Mode process without failure, you must start the computer by using the Recovery Console to access to the
  file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the service from the system startup of
  using the recovery and then Console by removing the system service file incriminated.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x1E. You can disable the cache in memory of the BIOS to try
  to resolve the error. You must also run the diagnostics of equipment, in particular the scanner memory, which
  the manufacturer of the system provides. For more information about these procedures, see the owner
  Manual for your computer.

  The error that generates this message may occur after the first reboot during Windows installation or after
  The Setup is completed. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For problems during the installation of Windows that are associated with the lack of disk space,
  reduce the number of files on the disk drive hard target. Search for and delete temporary files that
  you do not have to have, the files hidden Internet, backup application files and .chk files that contain saved
  fragments of files on the disc scans. You can also use another drive to hard disk with more free space for the
  installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.