Error: C:\windows\system32\spool\drivers\w32x86\LXCItime.dll
Download this message at the beginning upward.
It isn't the mistake that you've actually seen, is it? It helps when you post the full error message without paraphrase.
A "is not found... ', 'Might not work... '. "," error loading... or "specific module could not be found"message is usually related to the malware that has been configured to run at startup, but has been removed. "" Windows attempts to load this file but cannot locate it given that the file was most likely deleted during a scan anti-virus or anti-malware. Because the rest of the registry entry that tries to load the file, you get the error message... until you remove the registry entry.
LXCItime.dll may or may not be malware. I've seen information that suggests are related for Lexmark printers: http://www.hijackfree.com/en/autorundetails/?command=rundll32%20 [path]%20LXCItime.dll,%20_RunDLLEntry@16 ]
So, if you have a Lexmark printer, you might want to consider reinstalling the printer software.
However, there are several sites that suggest that this file IS malware, and apparently some anti-malware application installed you think so, too.
If you just want to get rid of the message, download Autoruns, that it analyzes, then click on the tab 'connection '. Look for an entry with LXCItime.dll. It would probably look something like:
[LXCICATS] rundll32 C:\Windows\system32\spool\DRIVERS\W32X86\3\LXCItime.dll,_RunDLLEntry@16
Uncheck the box next to the suspect and restart. The message should not appear. If you are sure that you no longer need this registry entry, you can use Autoruns to delete.
Tags: Windows
Similar Questions
-
After update my PC with the latest patches I started getting the following error message every time I reboot:
Error: C:\windows\system32\spool\drivers\w32x86\dlcjtime.dll
Entry: rundllentryI know it has to do with my Dell printer and I have uninstalled and reinstalled the printer, but keep getting the same error message. What is the cause and how to fix?
Hello
See this message from Dell - even if the models are different ago probably similar
problems with your computer and your printer. http://support.Dell.com//support/topics/global.aspx/support/DSN/en/document?c=JM&DL=false&l=en&s=Gen&docid=28E393B4B4A5ADEEE040A68F5B2849AA&doclang=en&CSCheck with Support from Dell and their forums.
Dell support
http://support.Dell.com/Dell forums
http://en.community.Dell.com/forums/
------------------------------------------------These could help however check with 1 Dell.
What is rundll32.exe and why it works?
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/What is the suspicious Rundll32.exe process?
http://WindowsXP.MVPs.org/Rundll32.htmI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Original title: says my c:\windows\system32\spool\drivers\w32x86\3\lxcftime dll is missing
I TRIED A NEW REGISTRY CLEANER THEN CANCELLED. AND THEN BEGAN TO GET MISSING FILES VIEW
Hi albertdibley,
- You have a Lexmark printer connected?
If so, the error seems to be related for the Lexmark printer drivers.
I suggest you to uninstall the printer and reinstall with the latest drivers from the manufacturer's Web site.
Enter the number of the printer model in the following site to find drivers. Download and install the same.
-
It is sthe message I get when I print a hallmark greeting card. The printer does not complete the printing process. Can I print from the computer, the word, online, just that a small problem. and yes I already reinstalled the printer and the program of the trademark.
It is sthe message I get when I print a hallmark greeting card. The printer does not complete the printing process. Can I print from the computer, the word, online, just that a small problem. and yes I already reinstalled the printer and the program of the trademark.
It is my understanding that if all you do is remove the printer in printers and faxes and then reinstall, you don't actually reinstall the driver. Instead, Windows detects the driver the exact printer you are installing is already installed and use it.
Follow the instructions here to completely remove the driver and other software associated with the printer and then reinstall it by using a new download from the web site of the manufacturer of the printer.
If the "LX" at the beginning of this exe file name indicates that you have a Lexmark printer, seethese instructions instead (essentially the same except for the steps 15-17).
Notwithstanding the foregoing, if you can print from other applications, the problem may not be in the printer driver, but in the print job generated by the application you are printing from. You try to print an e-card brand with a browser web (what browser and version?) or if you are printing from an application from Hallmark (Hallmark Card Studio?) that is installed on your computer. If the latter, have tried tosupport Hallmark ?
-
My printer will not open even I get a debug error C;\Windows\System32\Spool\Drivers\w32x86\3\lxddpswx.exe program
Module C:\Windows\System32\Spool\Drivers\w32x86\3\lxdddatr.dll
Run-Time check failure #3 the variables 'sNumberOfTopics' is used without be definedHello Thaionone,
Thank you for your message. To clarify, this printer has worked in the past? If so, has anything changed recently to include the hardware, software or updates? If this is a recent problem please try these suggestions. First, try a system restore to a point when it finally worked. Click HERE for instructions. If system restore doesn't fix your problem, then go to the printer manufacturer's website and download/install the latest driver for your printer.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: lack of entry: RunDLLEntry It just started and I have not installed anything new.
Hello Lscherr,
Thank you for your message. To clarify, you are able to print out your design program? You can try to perform a clean boot and printing of your design program. A clean boot will start your computer without any 3rd party applications, you can then start your design software and test the printing functionality. If you are able to print, the problem may be caused by another application of part 3. Click HERE for instructions to boot.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Hi, recently when I start my laptop I get the following pop-up message: lack of C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXCItime.dll entry: RunDLLEntry.
The only new program, I installed was a Lexmark printer, contacted Lexmark and with the help of a tech has established that the driver was installed correctly and it says that the pop-up message was a Windows problem.
that declares the message, it's that it can't find the file named: LXCItime.dll
According to the windows registry, which would have been changed and updated by lexmark software, the above file is saved in the registry, but it is not in the physical location on the disk.
my suggestion is to unplug the printer from the pc then uninstall the lexmark software, then restart.
Then, connect the printer to the pc and see if windows can automatically install the driver. If this isn't the case, then it will ask your lexmark cd or you will need to run the Add/Remove Hardware Control Panel and manually try to install the driver for it.
-
Original title: starting Windows Error Message
Starting Windows I get the message: error in entry c:\windows\system32\spool\drivers\w32x86\3\DLCCtime.dll RUNDLLentry
Hello
Have you made changes on the computer before this problem?To narrow down on the issue, I suggest you to check the behavior by starting the computer in a clean boot state. You can read the article and check.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: after a repair, be sure to set the computer to start as usual as mentioned in the "steps to configure Windows to use a Normal startup state" section of the article above.Let us know if that helps. -
I have a Canon MX850 printer: when the document is passed, I get the following error and it repeats until I have load with paper and press OK. I'll have 30-40 on the screen before I can reload the printer with paper. I deleted the printer and reloaded it. I scanned everything and nother works.
---------------------------
RUNDLL
---------------------------
Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\cnmsm98.dllThe specified module could not be found.
---------------------------
Ok
---------------------------
billtriceHi billtrice,
I suggest that you contact Canon support for more information on the issue.
http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer
-
I get this message and have no idea what it is or what it touches.
"Error in entry: RunDLLEntry C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\DLCJtime.dll missing.
Can anyone offer a solution to get rid of him?
Hello
This message refers to Dell printer drivers. You can try simply remove and reinstall the printer drivers relevant to get rid of it.
If not, visit this link to the Dell website, it can be applied to your system too:
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=JM&l=en&s=Gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true -
Since I removed my old Lexmark printer and replaced by a Kodak ESP C310 printer I get the following popup every time you start... Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXBTtime.dll the specific module could not be found.
Hello jackc37,
Have you tried to reinstall your Lexmark printer and then uninstall, to check if everything is deleted? When you started your system in a clean boot, you saw the error listed above?
How do I uninstall Lexmark printers
Please let us know status.
Thank you
James
-
What is DLCDtime.dll for? Can it make my computer slow? When I turn on my computer, this message appears
"Error in C:\Windows\system32\spool\DRIVERS\W32X86\3\DLCDtime.dll".
"Missing entry: RunDLLEntry.Is this bad?
Thanks in advance
Hello
1 how long you have been facing this problem?
2. don't you make changes on the computer before the show?I suggest you to try to solve this problem with boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article. -
getting ERROR IN c:windows\system32\spool\drivers\w32x86\3\LXCFtime .dll on startup. have a Lexmark 730 printer that is NOT always connected to the USB port. I read some of the post, but I don't understand what they mean. Not a novice, but also not a real Tech person. English simple need help please. Thank you
Also, the laptop is a HP Presario w / AMD 64Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
I suggest you try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
It will be useful.
-
I get following errors: Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime Windows 7
Please stand out as the answer. What is the number and the model of your printer (Lexmark)? You can try to uninstall and reinstall the printer driver.
-
I keep getting an error on c:\windows\system32\spool\drivers\w32x86\3\dlcjtimedll lack entry: run dll entry.how can solve this problem?
Hello
DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer then re - install
pilots. If you no longer use the printer and then subsequently properly, delete the printer. Also
Contact the Dell Support and forums for known problems.Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerHow to uninstall a printer from your Windows based computer
http://www.ehow.com/how_2299771_uninstall-printer-from-Windows-based.htmlDell drivers
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell support
http://support.Dell.com/Dell forums
http://en.community.Dell.com/forums/=================================================
If necessary use to remove the error.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
http://support.Microsoft.com/kb/929135How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlHow to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
I hope this helps and happy holidays!Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
I downloaded Firefox 5.0 beta (Aurora) recently and have been using it since it was available. I have a new computer I want to download Aurora, but I can't find where the load down to Aurora. Can help you. I've looked everywhere I can on Mozilla.com
-
Hi, I have problem to check my apple ID when you want to use imessage and facetime, ipad will not 'contact' to apple. my iphone checks without problem, have released the ipad market, but sit at the same. Please help if you can!
-
I had business relationships with a software provider who insists on the fact that their product is not supported for Windows 7 Home - it's for Windows 7 Professional. Why would it be? Home Edition is different from the professional edition (outside
-
I have a problem downloading fotor for my surface. someone at - it ideas?
I want to add titles to my photos, and photo ready installed app does not seem to allow this. I tried to download fotor, but all I get after a minute or two is a message saying there is a problem - with no details. someone at - it help him? Thank you
-
VCSA 6.0 connection error
HelloJust installed esxi 6 and deployed virtual server device 6. I used the ip addresses and the premises of sso authentication.I am able to connect to the web client with [email protected] , I upgraded to 6.0 vsphere client and I am able t