Error code #0xe0f00013, using the factory image restore

Similar Questions

• Receive the error code 0x800700b7 during the Vista system restore

  Get the error code 0x800700b7 during the restoration of the system.
  "System restore failed due to an unspecified error. Cannot create a file when that file already exists. (0x800700b7).

  I have a Dell laptop, Studio, running on Vista.  I just installed some Windows updates (ALWAYS a hassle!) and restarted the system.  Failed to start,

  I tried:
  (7 times) Startup Repair
  System Restore (at least 7 times - try them different restore points to restore the system, going back to mid-May
  Trying to reboot without doing anything

  The error message persists.   I can't boot the system in safe mode, so I'm not able to disable the antivirus software or go to start or anything else.  Windows does not start. Y at - it a fix for this error message?
  Help!

  I managed to fix it on my own over the weekend. In Safe Mode, disabled Norton and also downloaded a tool that Norton offers to help solve the problems of this kind.  The tool worked and my laptop works fine now. The update of Java was the problem - I don't allow anything not my automatic update system, but Java auto-updated anti-virus Norton was on.

• Error code 002000 using the Xbox.

  I have an error code 002000 and I ran the bot link for windows app I get the error code 02000. Majhong from Microsoft does not load

  Separated from -.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/how-do-i-correct-error-code-002000-with-Xbox/58247d57-52ad-4508-A334-eec031984bcf

  I no longer get this message after the 8.1 update, now I have to get away from starting and it goes back to the start screen

• Portege Z30 - problems of USB - error Code 10 using the disk external HARD - SOLUTION

  Hello

  I wanted to just connect a problem and the solution I just got/found. It's about a Z30 with an installation of Windows 7 32 bit and a 1 TB mSATA SSD.

  I was unable to get any USB 2.0 drive Flash or any (if USB or USB 3.0) external HARD drive to work. They would try to install but I'd end up with a yellow warning triangle in Device Manager.

  After various attempts of a workaround - I spotted alongside the driver.sys and usb.sys load - there was a mysterious driver which I finally tracked down the wizard of related software.

  After uninstalling the magician - all USB keys and external HARD drive worked perfectly.

  Do not have this problem with an other Toshiba with a standard SSD EVO and magician - so not quite sure that the installation is triggered it.

  However problem now * solved.*

  Thanks for sharing!

• Recovery Manager cannot restore computer using the original image

  Hello

  I'm working on a Pavilion P6000 desktop series (WW639AA).  Windows 7 (64 bit) does not load as it seems that his score is corrupt. I ordered a new restore disc (and additional floppy) HP to restore the hard disk.  I tested the hard drive and all past.  However, when I run the Recovery Manager and try to restore the computer, I get the following error:

  «Recovery Manager cannot restore you computer using the original image.»  Contact HP support.  ' Error #0xe0ef000e.

  All of the suggestions.

  Thank you.

  blewettjl,

  A disk that has been 'cleaned' will have this error with HP rated DVD.

  HP has a patch, called CyberLink Recovery disk utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en

• build error of createUser using the c# code sample

  I get the following build error when you use the c# code for the createUser use method example.

  I use VisualStudio2008 and the Blackberry_Admin_API - 5.0 - US.pdf c# code example.

  Build error States:

  Cannot implicitly convert type 'BESAdmin.BASemailExchangeWebService.EnableBlackBerryUserAttributesType' in 'BESAdmin.BASCoreWebService.EnableBlackBerryUserAttributesType' C:\VS2008\BESAdmin\BESAdmin\Form1.cs 76 488 BESAdmin

  The build error is on this part of the code:

  for (int j = 0; j)< attributes.enableblackberryuserattributes.length;="">

  {

  userEnableBBAttributes.enableBlackBerryUserAttributes [j] = attributes.enableBlackBerryUserAttributes [j];

  }

  Everyone has this same problem and found the solution?  It seems that there is something missing or incorrect in the sample code around type conversion between the EnableBlackberryAttributesType.

  Thank you, Ed

  Hi Ed,

  I tried throwing the code example in a project already created the mine and has not known this error at compile. The two types of objects must be the same, so I don't know why there is no conflict with assignment.

  Please try to use the sample code to create a user from the BAA API reference documents:

  http://www.BlackBerry.com/developers/docs/BAA/5.0.0/

  Or the Knowledge Base of the developer section:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/1608023/How_To_-_Get _...

  It can also be a good idea to recreate your proxy to do this.

  Let us know if the problem is still evident with the examples above.

• First and After Effects crashed. Uninstalled is not for them. Use the cleaning tool. I deleted everything else. Tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  Hello team,

  First and After Effects crashed.

  I tried to uninstall the utility (Mac OS). Uninstalled is not for them (which has worked for other applications).

  I used the cleaning tool. It seems to work, but the uninstaller for first and AE in the utility remained.

  I deleted everything I found CC remaining manually.

  I tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  I don't know what to do anymore.

  Could someone help me?

  Virginia

  I got the help of Adobe support, they sent me another link to download Adobe App Mgr It was apparently a network problem but, and it was resolved after a few re-tent.

• I WANT TO CHANGE MY CODE TO USE THE LEFT BUTTON = PREVIOUS IMAGE / RIGHT OF THE IMAGE NEXT TO ANY KEY KEYBOARD = NEXT IMAGE. HERE IS MY CODE.

  I WANT TO CHANGE MY CODE TO USE THE LEFT BUTTON = PREVIOUS IMAGE / RIGHT OF THE KEYBOARD = NEXT IMAGE TO

  ANY KEY = IMAGE NEXT. HERE IS MY CODE. PLEASE HELP ME OBI WAN KENOBI, YOU'RE MY ONLY HOPE:

  Stop(); stage.addEventListener (KeyboardEvent.KEY_DOWN, changeSection); function changeSection(event:KeyboardEvent):void {switch (event.keyCode) {case Keyboard.RIGHT: nextFrame(); break; case Keyboard.LEFT: prevFrame() ;}}}}

  Your problem seems to be a matter of not understanding what version of the code that you use compared to what your file is configured to use.  Your other display uses AS2, so if you want this to work you must set the parameters of publication for AS2.

  If your file settings are for AS3 code that show you in this announcement will be suitable for this because it is the AS3 code.  The function would change to what is shown below.  Mgiht want to use a listener KEY_UP instead of a listener KEY_DOWN.

  function changeSection(event:KeyboardEvent):void {}

  nextFrame();

  }

• Reference helps Dell factory image restore

  I'm trying to restore my laptop (studio xps 16) settings using the recovery image. If I look in my computer, I can see C and D drives. D is my recovery with 7 GB full partition out of 10 GB. It's good and dandy except when I open drive D, there is a folder that says recovery that is empty. Why is it empty when there are 7 GB of files in there? I have already hidden files shown. I don't know how else to restore my laptop. Any ideas?

  Also, I downloaded home edition of partition Wizard, and I was able to view files on the recovery partition. For some reason any this program allows me to see, so I know they are there. But, when windows Explorer regularly to look in the folder of recovery there is no files.

  its been a while that I did it, but I will try as much as possible...

  -try to put in your drive installation and startup disk.
  -in the menu it will say install now, but at the bottom it will say fix your computer (click here)... .it should look like this
  http://img.bleepingcomputer.com/tutorials/Vista-repair-options/Setup-option.jpg
  then the menu should look like this: http://images.pcworld.com/howto/graphics/136677-2511_recover-10b.gif
  -The command line option-click and you're ready to type a few things.
  -Make sure you have everything backed up on the disk you want to format.
  -type diskpart in the invitation of commpand and wait for it to load
  -When you can type again, type: list disk
  -type: select disk n , where n is the number of the player you want in the list before
  -now type: list partition and find the number of the partition to format
  -type: select partition n , where n is the number of the partition of the last step
  -now type: format partition n to erase all data from the partition
  This should be it for formatting the drive, now type in the command line to restore your stuff
  now, if your image is on the site of dell at the factory (d) recovery, then...
  type this: imagex/apply d:\dell\image\factory.wim 1 c:\
  
  
  He should take some time to format and restore, so please be patient
  When her if everything is done, it is not the type of output, just type exit until the command prompt window disappeared.
  you will then be back in the recovery menu, you can restart your pc (make sure that you change the boot option back to hardrive instead of "boot disk")
  and you should be done.

• Freeze for Dell Factory Image Restore

  Well, I'm in computer _ in recent days. 1521 Dell running Vista Home premium was unused for a while due to broken hinge. I fixed that and strives to update all Microsoft updates. And installed everything except couldn't get Vista ServicePack 1 install kept freezing during the installation. After 4 hours working with a very nice Microsoft agent by Chat and control of my pc we came to the conclusion to do an upgrade of Vista from the DVD. Well I never got the DVD with this machine! Nothing important was on the machine, so I decided to make a Dell Factory Image Restore. Well, once the restoration was launched, it seems to have frozen too. Dang! I keep you waiting for some time, but what can I do?

  Well, I'm in computer _ in recent days. 1521 Dell running Vista Home premium was unused for a while due to broken hinge. I fixed that and strives to update all Microsoft updates. And installed everything except couldn't get Vista ServicePack 1 install kept freezing during the installation. After 4 hours working with a very nice Microsoft agent by Chat and control of my pc we came to the conclusion to do an upgrade of Vista from the DVD. Well I never got the DVD with this machine! Nothing important was on the machine, so I decided to make a Dell Factory Image Restore. Well, once the restoration was launched, it seems to have frozen too. Dang! I keep you waiting for some time, but what can I do?

  Hey Pat Norman

  dell link below has a way to use for their recovery partition

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  If only it does not, you may need to contact dell at the link below

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Walter, the time zone traveller

• Reference Dell Factory Image Restore

  My hard drive is partitioned to C & D with Vista Home Premium installed on both. D was used to test the software and, after several installs and uninstalls, it's a mess and I want to start with a clean drive. My question is can use the Dell Factory Image Restore to redo the D drive with all the drivers, etc. rather than a clean Windows Installer with the hassle of installing software and drivers? I ran the restore to see if he offered an option to choose which drive to restore but it didn't. He only asked if I wanted to format the drive, so I stopped here assuming that it would be to format my C drive.

  Anyone know how and if I can do in terms of the restoration on the D drive.

  
  

• I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this?

  Ideas:

  • You have problems with programs
  • I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this? messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error code 643 during the installation of security update

  I have just run into the same problem!

  Todays Nov 25/09 windows automatic update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688).
  Installation status: failed
  Error details: Code 643
  Update type: Important

  Processor Core 7 920 Windows 7 standard upgrade to Vista Ultimate.
  Ouch again. That's the second problem with W7. Wasen can't able to install Flight Sim in windows7 says component MSXML 4.0 SP2 is not installed, please reinstall Flight sim to restore or repair, does that twice, but it does not work. This failure of XML Core Services could be linked to the MCXML 4.o problem?

  I followed all the commits that I can find, but not of specific solutions.

  I'm having the same problem (Vista). I can't find a solution validated for the error code 643 for the fix described.  I keep being told that the installation has failed.

  RandomMann,
  If you are still having this problem then take a look at this thread because it covers this error.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• Dell factory image restore?

  Hiya,

  I had problems with my laptop - it won't start, freezes after 2 minutes. I tried the system restore, boot repair, tried to start with different configurations, but it still won't start!

  Last resort I think about running a dell factory image restore from the system recovery options. I know how to do it, but I wonder if this will remove the vista OS in my laptop? I was not sent recovery discs with my laptop so if it removes vista - I'll be in a bit of a pickle!

  Thanks, any help will be very appreciated!

  :)

  A factory image makes exactly the same when you got it. So you will have
  get a new copy of Vista.
   
  --
  ..
  --
  "gurna002" wrote in message news: 36b13b35-1ef5-40f9-9b19-8343ecc91d29...
  > Yes, when I got my laptop it was ready installed on Vista! Then
  > you say that vista will still be on it and even if not - I can find new
  > Dell vista recovery discs!
  >
  >
  >
  > Thank you two for your help :)
  >