Recovery Manager cannot restore computer using the original image

Similar Questions

• Recovery Manager cannot restore Presario CQ56 & system does not start, the error BOOTMGR is missing

  1. number and product name

  Compaq Presario CQ56

   

  2 operating system installed (if applicable)

  Windows 7

   

  3. error message (if any)

  in the error log:

  Your hard disk (result-failure) id # UAMBXQ - 5H06AK - XD003F - 618U03 - DISK 1

  Start (result-failure) id # UAMBXQ - 5H60AK - XD003F - 40G 403 MEMORY MODULE 2

   

  4. all changes made to your system until the problem occurred

   

  There is no change made to the computer, before the restoration of what the computer should start, however, it would freeze once the system was running. Restarting the computer didn't help, and when I tried to restore to an earlier point, he stated that it was impossible to complete the restore. I tried the factory reset, however, it gave me an error message: "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. Error code: 0xe0ef0003. When I tried to restart the computer later, it gave an error message: "BOOTMGR is missing, press Ctrl + Alt + Delete to restart» How can I fix it?

  305 error refers to a failing hard drive. You will need to replace the hard drive.

  You can check the status of your warranty here.

  If you do not want to repair the laptop you need to contact HP support. If you are in the United States / Canada you can give them a call at 1-800-474-6836. For other countries you will need to visit this site.

  If you do not want to repair the laptop you I can provide useful information, but I'm going to need your product number. This document contains instructions to find the product number.

  I'll keep an eye out for your answer.

• Impossible to scan: "another program or computer using the HP imaging device.

  Original title: hp scanning problem

  I can't seem to find anything on the hp site regarding my being not scan with the center of Solution because that 'another program or computer use the HP imaging device ".  I have my Officejet 6500 connected via an ethernet cable in my Linksys routeras is my internet modem.  Someone has an idea?  I can print fine; I can't scanner to work other than the program with the paint.  Thank you for coming so someone can help out me.  -Steve M

  Hello

  I suggest you to visit the following links: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Networked-C6280-and-Windows-7-64-bit/td-p/217282

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Windows-7-Professional-and-HP-printer-software/TD-p/224258

  I hope this information is useful.

• Pavilion 5000: need assistance to restore the computer to the original image

  I tried to rset original image using the Recovery Manager and the restore disks that I did when I bought the computer from the computer.  I get a message at the end everything that said ERROR Code OxeOef0003 I have no idea how to go beyond this.  Can someone help me?  I'm not blonde, but not very techno...

  It seems that your hard drive has gone wrong and that it should be replaced.

  If you intend to change it yourself be sure to get the same size more and not the format of the AF.

  How to replace the hard drive.

• Error code #0xe0f00013, using the factory image restore

  Hello world

  I've had this laptop for about 8 months. The model is HP PAVILION DV6T-4000 NOTEBOOK of NOTES,

  I'm a software developer, so I need to install Linux on this machine using dual boot.

  I created the recovery disks before installing linux.

  Once I installed linux, windows 7 has stopped working and started asking for the disc of windows 7. Using recovery discs, couldn't find an option to restore the old installation of windows 7 (these options are disabled). Other options of formatting HD and restore out-of-factory State were available. In the end, I had to select restore factory image.

  When I boot the recovery dvd and do a system restore it support all 5 discs and the 6th disc when it is 83% and is "copy files needed to restore the hard disk" it throws below error:

  "Recovery Manager is unable to restore your computer by using the original image.  Please contact HP support.  "Error code: 0xe0f00013.

  I tried to restore it 3 - 4 times, each time that the result would be the same.

  I ran HD self-test, which doesn't show any problem with my HD recovery, I created discs are cool and have no scratches. I'm not sure what the cause of this problem.

  All this raises questions under:

  (1) what is the hexadecimal code "0xe0f00013?"

  (2) once we buy a "personal" NOTEBOOK, should we not be free to install any operating according to our need?

  3) why HP does not provide with a Windows disc, and why should we depend on recovery disks, or the recovery partition; These unreliable mechanisms?

  Earlier, I had a Dell laptop that provided me with all the windows and recovery disks.

  I bought HP recovery discs. lets see if provided HP recovery disks.

  If anyone has any other work around, please help.

  Thank you.

  Hello

  There may be a work-around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your laptop comes with Windows 7 Home Premium 64-bit, it comes to the retail version accurate, you would need.

  If you do not access to the retail drives, you can create an installation disk yourself - just download good picture disc from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD.

  http://www.mydigitallife.info/Download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-link...

  Use the disk to perform the installation, enter the Windows activation key located on the underside of your laptop when asked and once installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need to find from here.

  Kind regards

  DP - K

  

• my computer was repaired BY the best, now cannot use the original product key. now my computer ask fo a new product key and I do NOT HAVE a

  I had my computer repaired once it crashed, now I am unable to use the original product code, my computer keeps asking for a real. the hat of t one that I use came with the original box and says it is locked. I use the card that comes with the two CD

  If you go back to Best Buy and ask to do a good job on your computer. You have already paid for your computer fixed, and Best Buy do not have it you returned in a usable state.

• The computer is very unstable... Should I reset the computer to the original state with Dell recovery

  As there is no support for Windows XP SP2 updates (I managed to get the Microsoft SP3) if I go back to my computer to the original state with recovery Dell how do I get Service Pack 2 and 3 again.  Deleted files gives access to the trash... they no longer heard by KIJIJI when I tried to place an ad that some well known hacker has been using my IP address.  This means that he can see literally everything I do on my computer.  Really need help

  overthehillandonaroll

  Run Windows Update after recovering the system.  It will offer you all the updates, including service packs.  Run repeatedly until it shows that no more updates to date are available. Boulder computer Maven
  Most Microsoft Valuable Professional

• HP Officejet scan cannot be run, error "Scan cannot be performed because another program or computer uses the network device.

  Hello everyone,

  After you have installed Windows 8 on my desk, I lost the ability to scan with HP (Officejet 8500 pro wireless) solutions Center. Wen I click on scan (rather photo or document) I get a message: "Scan cannot be performed because another program or computer uses the network device. There is a little information on the HP site. I've tried all the suggested solutions, including several install and reinstall the HP software. The printing part works very well, and I can scan with other programs directly using the WIA driver. Now I scan documents to pdf authorizing searches, who wants me that this question be set quite often. Currently, I use my laptop for that. Everything works very well with Windows 7.

  Any help would be appreciated.

  Thanks, Johann

  I contacted HP about this specific problem.  They informed me that it is an upgrade of Windows 8 that Twain issue and they do not support this problem.  Reinstall the current drivers of hp does not help.

• I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog update saved on thehard d

  I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog to date backed on thehard drive and have tried to insert into the new folder to lightroom. Unfortunately none of my changes, collections etc. seem to be present on the new computer. I still work lightroom with any changes on the old computer where all the photos. Help

  He seemed to have solved this problem - the catalogue of the old computer has been saved as a zip file. Once extracted, it could be used as the primary catalog for lightroom on the new computer

• I have Photoshop CS5 student/teacher edition. The computer on which it was installed just rebuilt. Can I reinstall using the original serial number 5 years ago?

  I have Photoshop CS5 student/teacher edition. The computer on which it was installed just rebuilt. Can I reinstall using the original serial number 5 years ago?

  Yes. It is a perpetual license. The serial number will work as long as you have the hardware and the operating system to run the software.

  Download the installer from Adobe's CS5, install, then enter your serial number.

  Download the CS5 products

• What should I do if I lost my vista CD when I want to restore to the original image?

  What should I do if I lost my vista CD when I want to restore to the original image?

  Hello

  Vista came preistalled please contact your computer manufacturer, and then request to send you replacement discs.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

  PS You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open 'Documents' because the original item cannot be found.

  By clicking on the sidebar in the finder, received the error of the object:

  Cannot open 'Documents' because the original item cannot be found.

  I spend a lot of stuff around recently because of a SIN that went down.  A lot of backups, transfers etc.

  Just as moving things to normal.

  Have all my backup files.

  If I go to users / #username "/ Documents I get the following:"

  Cannot open the 'Documents' folder because you don't have permission to view its contents.

  cmd - I do not show Panel permissions at all, just said I have unknown access.

  Finally, the fold icon has a small blue arrow in a white circle in the lower right corner.

  I am the only user and admin.

  Do you use a data service on the clouds that fits in the Finder, like "Dropbox" or "Google Reader?"

• How to make a lock off the internet so I can have another WiFi computer using the internet

  How to make a lock off the internet so I can have another WiFi computer using the internet

  you do not take the lock itself.

  Instead, you configure another computer with security information to access the connection Wireless secure.

  Unfortunately, we cannot help you with this, because we cannot tell if you are the owner of the wireless connection or someone trying to hack it via another computer.

  However, what you can try is to contact technical support that provides your internet service.  they will be well to validate your identity and then provide help or more detailed instructions.