Error code 2000-0145 on SSD
2000-0145 has to do with a rotation test. Dell actually had a stroke of genius to design a diagnosis that has identified problems hard spin-up and test the integrity of a player. An SSD does not have an engine and cannot return a response appropriate for this part of the test, immediately throws an error. It is not a standard for one SSD to answer with a bypass for a test like this, since it is an exclusive test. Some SSD cannot report this error, while other models will be.
I had to do a lot of digging for it and tried several SSD to see how this error code is displayed. Again, he would have them all, but he has been consistent among all readers of specific models. Was a huge headache 2 months & nightmare for me. SSD so now I'll try other software, or other system to check the integrity of an SSD before calling the bad disk. A unique model of SSD, this has produced on several readers was the OCZ Vertex SATA III 4. Fact on all sizes we tested: 128, 256, 512. Down them on a version customized with various diagnostic tools: discs had no problem. Many are still in production several months after running the tests.
Tags: Dell Drives
Similar Questions
-
How can I fix error code 2000-0145, hard drive dst
When I quit Windows, I get the "End program" dreaded error. I usually get several times until the machine stops in fact. Windows XP
Sounds like your hard drive is a failure. Check with the manufacturer of your PC error code and see if they have the diagnostic software that can run on your computer to diagnose the problem. This isn't a Windows error, it is a hardware error on your computer.
-
Diagnostic error code 2000-0123
Unable to connect and then when I ran before initialization system assesment 4510 build got error code 2000-0123. How to solve?
Hello
· What version of the operating system is installed on the computer?
· What happens when you open a session?
· When the issue started?
If you are using a Dell computer, then check out the following link for the difficulty with the error code: 2000-0123.
-
Error code: 2000-0146 (laptop hung on "Installation screen Windows updates")
OK, so I have every time I turn on my computer dell laptop (I have windows vista) it acts like it is to install the updates of windows. He said same facility 3/3 even though the completion bar shows 0%. She does this, is like its about to restart then passes to the installation screen. I ran the diagnostic test and the error code 2000-0146 came. I'm not sure if this is useful, but if anyone has a solution please help! Thank you
Oh and I tried to restore the option and he did nothing.
Hi cgardne5,1. How did you restore the computer?Try these steps and check the result.
Step 1: The repair of the boot with Vista DVD
a. Insert the Windows DVD.
b. restart your computer.
c. let the computer restart (boot) from the DVD.
d. If you are prompted, press a key to continue.
e. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
f. do not click install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
g. make sure that the appropriate operating system is selected, and then click Next.
h. After you click Next, the System Recovery Options menu appears.
i. click on startup repair. Once the Startup Repair tool is completed, click Finish to restart the computer.
j. remove the DVD and restart the computer to see if the system boots fine.Step 2: If you do not have the Vista DVD, start the computer in safe mode and restore the computer
See Start your computer in safe mode
See System RestoreNOTE: You can also choose the system restore on the system recovery options.Kind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
I get the error code 2000-0146 found no operating system, I'm on Windows Vista on a Dell inspiron 1545.
Tried to boot from the CD I can do a disk check but it go than even if loading step and then the green light flowing (as knight rider because..... kit) while he just sits on a gray screen... Any ideas anyone... youn think it's disk hard totally kaput, or maybe something else... I read on the site that someone changed its ram as 1 was defective and it worked.
Thanks in advance
Chris.
Saving your files:
You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.
@@@@@@@@@@@@@@@@@@@@
This program may also interest you.
"TestDisk, data recovery.
http://www.CGSecurity.org/wiki/TestDisk
TestDisk can run under
- BACK (either real or Windows 9 x box BACK),
- Windows (NT4, 2000, XP, 2003, Vista, 2008, Windows 7 (x 86 & x 64) Windows, 10)
@@@@@@@@@@@@@@@@@@@@
Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.
"How to use Knoppix.
http://Lifehacker.com/192982/geek-to-live--rescue-files-with-a-boot-CD
@@@@@@@@@@@@@@@@@@@@
"Recover files from Windows using Puppy Linux disks"
https://www.WinHelp.us/recover-files-using-Puppy-Linux.html
See you soon.
-
ERROR CODE 2000 - 0142 WHAT DO I DO WITH THIS CODE?
I have a laptop DELL with Windows Vista loaded.
It tries to load the desktop but keeps running without result green bar
CHECKDSK is conducted without all the mistakes are found.
DIAGNOSIS showed the color screen, then the error code 2000-0142
which seems to be related to the hard drive.
F2 function key works to change settings
What should I try to run windows?
Thank you
Hello
It is an error code Dell saying that your drive hard has failed and must be replaced.
Read this information from the Dell Community.
http://en.community.Dell.com/support-forums/laptop/f/3518/p/19451299/20115134.aspx#20115134
http://en.community.Dell.com/support-forums/disk-drives/f/3534/p/19498610/20329964.aspx
http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485947/20274290.aspx
For more information about error codes Dell, please ask in the Dell Community Forums.
http://en.community.Dell.com/support-forums/default.aspx
See you soon.
-
Error code 2000-0146 and 0F00:065 D and B 0F00:137
I have a Dell Studio 1735 laptop. Today it froze on me. I could only make a hard stop. I tried to log in again and got on the desktop with icons, but couldn't go further. Don't have hard stop yet and I tried to go back to the top. I made a kind of diagnostic tests and received the error code 2000-0146 following. Also received the 0F00:065 D error reading DISK_0-self-test and 0F00:137 B DVDRW_1-disk is missing Virgin insert the data disc (example of the RCD). I don't know what all these means. Can someone direct me if it can be repaired and how I can fix it. Or do I need a new hard drive. Your help is greatly appreciated. I use another laptop to write this message.
The first two messages mean that the hard drive has failed. The third says there is no disc in the DVD drive, so it could not be tested.
-
my friend has an inspiron she bought there is display the following error a year and a half
Info: the configuration for an item in the object is invalid in the boot configuration data store.
Hi Richard,
1. are you able to boot into normal mode after receiving the error message?
2. when the problem started?
3. did you of recent changes on the system?
You can consult the following link of Dell support for the difficulty with the error code: 2000-0123 and checkif it helps.
Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers
Hope this information is useful.
-
I have dell 1525 top of the tower and OS will not run. Error code 2000-142, status bite 79, error code 0F00:075 D and Bios memory hard drive, SATA drive read your 41166486 data uncorectable media wrtie error block protect error code 0F00-0244then kept showing up on several more blocks. Can I fix? Joe
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to start the computer in safe mode and check if you can start the computer:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
Try to perform the verification and startup repair if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questionsIt will be useful.
-
Error code: 2000-0142, HDD 0-Self Test UN Succesful status 79.
Hello guys
I ran a Diagnostic Test on my new laptop N5010, it failed the Test of hard drive and gave this message "error Code: 2000-0142, HDD 0-Self Test unsuccessful status 79.»
Can someone help please...
Regarads
khanisar
Error Code 2000 - 0142, indicates a failing hard drive / failed and you need to replace it, because it is new laptop for a replacement of the hard disk, contact the Dell Technical Support and provide the error message.
Bev.
-
Drive hard error Code 2000 - 0142
Inspiron 15 (3531, mid-2014)
I tried boot diagnostic that the result has failed with the error code 2000-142.
I have used a quick diagnostic race through dell online support site - it shows critical errors found
for hardware failure then suggested for a replacement.
Targeted both reading test SMART short self-test is broken.
We hope to hear from you on your recommendations of experts on hardware issues.
[Admin NOTE: maintain the label removed in accordance with the TOU strategy] [Admin NOTE: deleted in accordance with the Express service code TOU strategy]
Ryan Ibarreta - [Admin Note: personal information]
Philippines
Error code 2000-0142 usually indicates a failing hard drive / failed, first of all, try to remove and reinstall the hard drive, then re-run the diagnostic tests and see if you receive the same error.
If the same error is received, the hard drive has failed, then you need to replace it.
If you have a warranty from Dell, contact Dell Technical Support for a replacement hard drive.
Bev.
-
So my friend gave me his computer dell laptop. The thing would boot normally for a few days until he would give me a blue screen of death with the "UNMOUNTABLE_BOOT_VOLUME" message constantly to not even upward. I ran the diagnostics and got the error code 2000-0146. What I've read, this code error means that the HARD drive is bad and must be replaced. So, to make sure that it's the hard drive, tried to boot from an old hard drive, I got around the installation by USB and windows gave me the same stop error message. May - so that means it's a motherboard problem?
No, it isn't - unless the operating system was installed on this drive AND the system in question, that it won't work as a bootable drive.
Unplug the system, remove or disconnect the battery and hold the power for 30 seconds approximately. Turn on and re-run the diagnostic tests - if the same error appears again, the drive is bad. Replace it.
-
XPS M1330 error Code 2000 - 0141
Hello
I use a Dell XPS M1330 like a laptop and main computer. I turn off night but work on it fairly regularly throughout the day. I was recently working on this subject, and he's locked. CTRL Alt Delete did nothing, so I had to do a hard restart. When it started, I got error code 2000-0141, does not not not my hard drive. BIOS not found anything. I off for maybe 15 minutes and then try again.
I can now boot windows... a little. I can either start normally or repair mode (recommended). I tried to fix the mode and he sat there on the screen for about 4 hours. I tried in normal mode, and it loads in continuous (1: 00, still no start with microsoft windows bar continuously flashes).
So now I lead nowhere, but the computer does not recognize the hard drive now. What is an overheating problem? What can I do? I'm working on my laptop, so I suffer serious withdrawl.
-Sim
-
Error code 2000-0146, 0141
2000-0146, 2000-0141 error code. He cannot get the computer to go to safe mode. Computer turns on, dell appears and then darkens. Any help is greatly appreciated.
When I turn on the computer, I can go to F2 or F12. When I hit F8 a list appears, but any item I select the screen goes black and then after 2-3 minutes it says failed to start. Try F1 to reboot, F2, to go to the configuration and F5 to run Diagnostics. If you run them diagnoses get error codes.
These are mistakes of automatic drive test. You will probably need to replace the hard drive.
-
error code 2000-0251 Power Edge T620
Salve,
a seguito di inaspettati riavvii del Server ho made it test hw per vedere is this fossero problemi.
test of durante he ho received the error code in oggetto e che allégo come "mistake1.
controllando it log poi ho rilevato anche altre 2 anomaly che allégo come "error2.
both nel file errori.zip, rimango sono in attesa di sapere che cosa fare o che parte auswechseln is ditch necessario.
Buongiorno,
slab information if no sono critici o comunque non riconducono gli inviate went causa dei riavvii randomici.
Nel dettaglio, sono if di apertura dello chassis, if di alimentatori, course a Febbraio UN th delle batteria della PERC che completa e he ciclo di carica my che torna later under normal conditions, a Luglio.
Being it sistema fuori co, to vuole verificare he guasto in modo più approfondito dal nostro supporto tecnico can fornirle UN preventivo di spesa by the Telefónica diagnostica.
MI tenga al corrente is wants further care, e the potro cars privatamente tramite e-mail.
Grazie
Marco
Maybe you are looking for
-
Just updated to macOs Sierra. At the opening of my contacts app, discovered about 80% of my contacts are missing. IPhone activated and iCloud.com and they are still there. Any tips?
-
Loss of web access remote Firefox by ISP technician
Today, 2011 December 25, I lost internet access. 'Server not found '. I tried to reset procedures with the help of technician of the ISP (TWC). We have isolated the loss of my browser Firefox version 3.6.25 operating on my iMac with OS 10.4.11 2002.
-
Satellite P200D and Vista x 64 drivers
Hello I recently added to my satellite P200D - 11L 4 GB of ram.Because the 32 bit OS does not recognize 4 GB of ram, I decided to move to 64-bit hoping that Toshiba is promoting Vista and, of course, the spread of 64-bit systems. I am very disappoint
-
Satellite A200-1AX: very grainy videos after Win 7 installation
Hello. I have a toshiba Satellite A200-1ax and uses it for Vista when I got it.I've got rid of the operating system and to install XP, thous install BIOS update for XP.I recently installed Win7 and everything is good. The only problem I have is with
-
Error code 0 x 643 trying to install KB2833941
I've tried at least a dozen times to install the "update of security for the Microsoft.net Framework 1.1 SP1 on Windows XP (KB2833941) for a few weeks. I get (error Code 0 x 643). What should do? George Moved from feedback Original title: Error Cod