ERROR CODE 2000 - 0142 WHAT DO I DO WITH THIS CODE?

Similar Questions

• What is PXE - 61 media test failed error and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop

  I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.

  Kala

  Hello Mohan,

  ·         You did changes to the computer before the show?

  These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.

  Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.

   

  Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

• What is the problem with this pl/sql code?

  What is the problem with this statement of the cursor? I am getting PLS-00341 error for her:

  CURSOR cur_rsource(p_sql_stmt IN VARCHAR2) IS
          SELECT plan_table_output FROM v$sql s, table(dbms_xplan.display_CURSOR(s.sql_id, s.child_number)) t WHERE sql_text LIKE '''%'||p_sql_stmt||'%''';

  How to solve this problem?
  
  Thank you
  
  Published by: PhoenixBai on December 14, 2009 14:05

  I don't have time right now to study exhaustively, but for me his vomit ORA-00942 table or view does not exist on this line:

      SELECT sql_id, child_number into tmp_sql_id, tmp_child_number
           from v$sql where sql_text like sql_statement||'%' and sql_text not like '%v$sql%';
  

  I am able to select from v$ sql in normal SQL as user I am compiling as, so don't know why it's complaing.

  Anyone know if there are certain restrictions on access to the views v$ through PL/SQL?

  EDIT: http://www.dbasupport.com/forums/showthread.php?t=22299

  Access to the views of $ v seems to be through a role - try giving explicit access to it.

  As SYS, you must grant select permissions on V_$ SQL (V$ SQL is synonymous with V_$ SQL) to your owner of the procedure. Just tested on my system and it allows him to compile.

  Published by: Cyn on December 14, 2009 10:30

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.

• What is the problem with this WHERE statement?

  What is the problem with this WHERE statement?

  < cfquery datasource = "manna_premier" name = "kit_report" >
  SELECT SaleDate,
  TerritoryManager,
  Distributor,
  DealerID,
  Variable,
  US_Dealers.ID,
  DealerName,
  DealerAddress,
  DealerCity,
  DealerState,
  DealerZIPCode
  Orders, US_Dealers
  WHERE US_Dealers.ID EQ DealerID AND SaleDate BETWEEN #CreateODBCDate (FORM. Implementation) # AND #CreateODBCDate (FORM. End) #.
  ORDER BY SaleDate
  < / cfquery >

  It's driving me crazy!

  Syntax error (missing operator) in query expression ' US_Dealers.ID EQ DealerID

  You accidentally use the CF equals operator: "EQ".

  Instead of MS Access: «=»

  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver]...

  in a query expression. AND SaleDate BETWEEN #10/1/2009 #-October 18, 2009 #'.

  I don't see how CreateODBCDate() would produce these values.  But maybe it's just a quirk of the error message?

• What is the problem with this URL

  Can someone tell me what is the problem with this url

  owa_util.redirect_url(apex_util.prepare_url('f?p='||:APP_ID||':25:'||:APP_SESSION||'::'||:DEBUG||':25,28'||':P25_JOBID,P25_PG:&P3_JOBID.,3, null,||:APP_SESSION'));

  It gives me a value for P25_PG, that is to say 3 but always sets P25_JOBID to 0
  
  Gus

  Hello Gus,

  It looks like point P3_JOBID has no value for the rendering of the page.
  If the value is set subsequently, you can try the following change

  owa_util.redirect_url(apex_util.prepare_url('f?p='||:APP_ID||':25:'||:APP_SESSION||'::'||:DEBUG||':25,28'||':P25_JOBID,P25_PG:'||:P3_JOBID||',3, null,||:APP_SESSION'));
  

  But the part at the end

  ||',3, null,||:APP_SESSION'
  

  Wil do nothing because you give only 2 items in the list separated by commas of the page elements you want to submit. Everything after the second comma in the comma separated value list is of no use for the url of the apex.

  As additional info, the URL of the Apex is built like this:
  >
  1 - application ID or alias
  2 - page ID or Alias
  3 - session & SESSION. : APP_SESSION
  4. application (for example, PRINT_REPORT = REPORT_1) & ASK. : REQUEST
  5 - debug (YES or NO) & DEBUG. : DEBUG
  6 - cache framework

  APP - clear the cache for the entire application
  SESSION - clear the current user session cache
  PR - Reset pagination
  x - clear the page cache x
  -empty the cache for the element y

  7 - separated by a comma list of items on the page
  8 - the list of values separated by commas
  9 - mode printer friendly (YES or blank)

  f? p = & APP_ID.: 1010: & APP_SESSION. : & DEBUG. : RP, 1010:P1010_ITEM1, P1010_ITEM2, P1010_ITEM3:A, B, C
  >

  Kind regards
  Kees Vlek
  -----
  Company: http://www.orcado.nl
  Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
  Twitter: http://www.twitter.com/skier66
  If the answer to question please change replied and mark the appropriate post as correct / helpful.

• What is the problem with this Forum? Why Adobe taking so long to reply to messages?

  What is the problem with this Forum? Why Adobe taking so long to reply to messages?
  It is in fact 'specific' Forum of Photoshop.
  I usually come back another Adobe forum responses quickly.

  Chime.

  Hi people,

  For what it's worth, there are several of us who try, in addition to our regular work, to keep an eye on two other forums.  Quite simply, we care about the product and try to make sure that we give our customers the best experience as possible.  Plus, what better way to hear about your weak points in order to solve them.  But, as Mylenium and Christmas as well stress this, the forums are officially a user experience.  If you need help fast or official, it isn't the best place to do it.

  Regarding your question of Arab, Rahzah, I answered in two different threads and would be happy to help you with your problem.  Please choose a single thread and stick with it. two tabs is a pain.

  Thank you
  David

  PS - some of us do check the forums on our time, as I did last week at the launch while I was on vacation.

• Could someone explain to me what is the problem with this refined expression?

  Hi, could someone explain to me what is the problem with this refined expression

  faultCode:Server.Processing faultString:' unable to invoke CFC - regular expression malformed ' ^ [0-2][0-9][/][0-1][0-2][/][1-2][0-9]{3}+$ '.»»

  Thank you

  I think that the + should not be there. Do you have a match?

• HP Pavilion Slimline S5000 series what proccessors are compatible with this desktop computer

  HP Pavilion Slimline s5000 series

  MS Windows 7 Home Premium 64 - bit SP1

  PEGATRON CORPORATION NARRA5 (Socket AM2)

  basically the research to upgrade this computer, but seeks a proccessor with certain powers to him.

  seen things here and there about am2 slots to use am3 proccesors with a bios upgrade and this and that.

  I just want to know if any am2 + / am3 processors will work with this computer.

  I could find only a proccessor am2 but I do not trust any other sites then amd itself wich doesn't am2 processors do more

  Newegg wich ofc cannot sell what is not done more

  and tigerdirect which is the same case.

  If only I had the money to buy a pc with a new am3 motherboard. \

  Hello

  Here are the specifications of your PC (s5623w).

  In theory, these processors AMD Socket AM2 + rated 95 watts should work. I would stay away from the 'B' models

  Find out what the return policy is before you buy.

• What is the problem with this PDF?

  When I close a certain document PDF Adobe Reader (11.0.2) asks: ' do you want to save changes to... before closing?

  Apparently, something is wrong with this document, but what?

  The document is displayed correctly.

  How can I find out what's wrong with the document?

  The document can be found here.

  Horn

  

  Thanks for your help guys. I found the problem. Some of the shifts in the xref table were incorrect.

  Apparently, Adobe Reader corrects the xref table. When you close the player he manages this fix as a change in the document, thus showing the dialog box "do you want to save.

• error code 0146 error msg 2000-0142 and 0f00:065 d ide device failed

  self-test is not part the test reading.   can someone tell me how to solve this problem

  Hi tlmax63,

  It seems to be a problem with the hardware, then I would ask you to contact the manufacturer of your computer to solve your problem.

  Kind regards
  KarthiK TP

• Can't stop... What is the problem with this button code?

  Hello

  I am totally confused as to why I can't navigate to another frame.

  I put 2 days in this simple problem now and I'm ready to give up and go back to AS2.

  Help, please!

  I use CS4; publish the AS3 settings, 10.0

  
  I have a button on frame 2 that should take me to frame 3 when you click it.

  (So far I tried a hundred different ways, but I don't get to frame 3...)

  I tried different things...

  > Create the button dynamically from the library...

  > Insert statically library on frame 2...

  > referencing the mainTimeline by a variable...

  > wrapping the stop action in another function... (if it is placed directly on the timeLine of the movie properly goes directly to frame 3)

  > naming frame 3...

  > using "nextFrame" rather than "STOP"...

  etc...

  In most cases I don't get an error in the output panel and no compiler error either. It simply doesn't get it!

  (Just on the same frame after I click the button)

  Here is the code which I think should work; but does not work:

  function moveTo3 (event: MouseEvent): void {}

  trace ("Button_Clicked"); always redraws correctly; but the film does not go to frame 3.
  

  gotoAndStop (3);
  

  }

  
  

  f_btn.addEventListener (MouseEvent.CLICK, moveTo3);

  WHAT ME MISSING HERE?

  Thanks in advance...

  If you found the trace, you get frame 3.  Something else is causing the stop(); to ignore.  You have any kind of active continuous operation code in the file, as an ENTER_FRAME listener, or some other listener who might have been waiting in the wings?  As I said, it is not likely to be a bug, it is not impossible.  If you can save a copy of the fla file in a CS3 file and make it available via a server I can take a look and see if I can find the suspects.

• What is the problem with this single line of Java code in the software special approval BPEL code?

  Hello

  My java code does not build in jdev if I leave this line in java tissue BPEL code

  Criteria of SearchCriteria = new SearchCriteria (AttributeName.USER_LOGIN.getId (), une_chaine, SearchCriteria.Operator.EQUAL);

  With the help of Jdev 11.1.1.7.0

  oimclient is inside of the SCA-INF/lib, manifest says it is version 11.1.2.2.0

  Error message does not say much

  at com.collaxa.cube.lang.compiler.template.CubeProcessGenerator.compile(CubeProcessGenerator.java:313)

  at com.collaxa.cube.lang.compiler.template.CubeProcessGenerator.generate(CubeProcessGenerator.java:169)

  at com.collaxa.cube.lang.compiler.BPEL1Processor.transform(BPEL1Processor.java:257)

  at com.collaxa.cube.lang.compiler.BPEL1Processor.process(BPEL1Processor.java:161)

  at com.collaxa.cube.lang.compiler.CubeParserHelper.compile(CubeParserHelper.java:47)

  at oracle.fabric.bpel.bpelc.BPELComponentValidator.validate(BPELComponentValidator.java:40)

  at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1066)

  at oracle.soa.scac.ValidateComposite.doValidation0(ValidateComposite.java:514)

  at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:493)

  at oracle.soa.scac.ValidateComposite.run0(ValidateComposite.java:214)

  at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:195)

  at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:187)

  Do I need exactly the same version of jdev to oimclient?

  TIA

  Leo

  Well it seems to work when I remove all imports, even classes in java.util. as map, list, etc.

• What is the problem with this piece of code?

  Security.allowDomain("you/tube.com"); var my_player:Object;

  var my_loader:Loader = new Loader();

  my_loader. Load (new URLRequest("yout/ube.com/v/xe95yC_nsDI?version=3"));

  my_loader. = contentLoaderInfo.adfunction (Event.INIT, onLoaderInit);

  function onLoaderInit(e:Event):void {addChild (my_loader);

  my_player = my_loader.content; my_player.addEventListener ("onReady", onPlayerReady);

  }

  function onPlayerReady(e:Event):void {my_player.setSize (520,290);}

  }

  If you want to help troubleshooting code you should present correctly implemented with withdrawal form and separate lines for different actions.

  I see a number of errors in these two lines only...

  my_loader. Load (new URLRequest("yout/ube.com/v/xe95yC_nsDI?version=3"));

  my_loader. = contentLoaderInfo.adfunction (Event.INIT, onLoaderInit);

  (1) who cannot be a valid address of youtube with the slash in there

  (2) who dot leading contentLoaderInfo is a mistake

  (3) I don't know of a method called adfunction, and if I paste this line it turns into something with a dash in the name of this method

• What is the problem with this embed code (pretty please)?

  Hello - anyone can tell me what I am doing wrong? I modified a friends homepage and I am tryring to incorporate the new .swf file that works perfectly in the second URL

  http://www.verityslice.com/grownuphtml/index.html (does not work)

  http://www.verityslice.com/grownuphtml/gum.html (work - published originally in Flash)

  Thank you

  In

  http://www.verityslice.com/grownuphtml/index.html

  Line under causing your html trying to load gum.swf of http://www.grownupmarketing.com/gum.swf, which failed.

  http://www.grownupmarketing.com/"/ >

  Option 1: use the good relative to your swf file path

  "grownuphtml/gum.swf".

  Option 2: use the full path to your swf file

  'http://www.grownupmarketing.com/grownuphtml/gum.swf'.

  Option 3: remove the tag base above.

  * but you may need to correct the target of the link of your page menu items.