Error code: 6004; MODBUS Exception code: 4
Hello
What means this error: error code: 6004; MODBUS Exception code: 4
Thank you
Hi Peter,.
Here is the description of the error:
concerning
Tags: NI Software
Similar Questions
-
Error 6010 Modbus Exception code: 10
Hi all
I need assistance with the modbus library, I just downloaded and since I am not an expert in modbus I have trouble using it. Basically, what I want to do the right is now read two input of a device (address 1006 and 1007) slave registers; using .vi MB Ethernet Master query required registers (poly) reading. All I get is an error code 6010 MODBUS Exception: 10. I saw the MB Ethernet example Master.vi to compare with mine and see if I was missing something, but I was not able to solve the problem.
I put a screenshot of the block diagram.
Please, someone tell me what I'm missing!
I only didn't series modbus, modbus Ethernet, I can't be sure. But with modbus series, you have certainly set the address of the slave. This cluster has a "customer ID" which seems to be that it should be equivalent to an address of the slave.
-
Error code: in the resWMP54GS_US.dllat00014899 module Ewin32Error Exception
I get this error code. What it means? Ewin32Error of exception in the resWMP54GS_US.dllat00014899 module
Try reinstalling your Linksys wireless adapter drivers
-
Error code: Exception processing message (parameters 0XC0000013 0x758b92a0 0 x 00000004 0x758b92a0 0x758b92a0)
And: Photoscreen Eve-no disc (there is no disc in the drive please insert a disk in the 1\dr1 drive\device\harddisk)Hello
Thank you for using the Microsoft Windows Vista Forums.
I will need some additional information to help you best.
O when exactly do you get this error message?
O have any changes to your computer recently?
In the meantime, follow the instructions below that may help you resolve the issue.
If your removable media appears with a drive letter named C:\ or any other existing drive letters, you must change its drive letter.
1. click on start.
2. type in "Computer management" in the search box.
3. click on computer management.
4. click on continue to continue.
5. in the computer management window, click on disk under the option of storage management.
6. you will find all the storage devices connected to your PC here.
7. If you want to change the drive letter, right click on the connected removable media and click change drive letter and paths...
8. it would take you to another box. Click on change.
9. Select the drive letter to assign the menu drop down.
10. to confirm, click OK.
11. click on Yes. Check whether the problem is resolved.
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
Why I'm not able to associate the user defined exception with ORA-01403 error code
why I am not able to
Associate a user defed exception with ORA-01403 error code?
declare myException Exception; pragma exception_init(myException ,-1403); begin raise myException ; Exception when myException then dbms_output.put_line('raised due to myException '); end; /exception of ABC;
*
ERROR on line 2:
ORA-06550: line 2, column 4:
PLS-00701: ORACLE error-1403 of PRAGMA EXCEPTION_INIT illegal number
ORA-1403 is an outgoing BOF NO_DATA_FOUND exception. And we used to NO_DATA_FOUND in pragma exception_init + 100.
Thus, instead of the you can used this different exception code which is not associated with any exception.
For example:
declare
Exception myException;
pragma exception_init (myException,-7856);
Start
raise myException;
Exception
When myException then
dbms_output.put_line ('high due myException');
end;
-
Set the error code for the exception qualified using the pragma exception_init
Hello
I did experiments on exception management in oracle plsql. In my experiments, I did the following anonymous plsql block.
+ < < outer_block > > +.
declare
+ exceptions. +
Start
+ < < inner_block > > +.
+ State +.
+ exceptions. +
+ start +.
+ recovery outer_block.exc +;
+ exception +.
+ What then outer_block.exc +.
+ dbms_output.put_line ("' outdoor Exception caught"); +
+ What then inner_block.exc +.
+ dbms_output.put_line ("'Inner Exception caught"); +
+ end; +
end;
When I run the code, I got the output "external Exception caught".
------------------------------------------------- PLSQL Block 2 -------------------------------------------
I changed the code a little differently by assigning exceptions error codes.
+ < < outer_block > > +.
declare
+ exception exc; +
+ pragma exception_init (exc,-20001); +
Start
+ < < inner_block > > +.
+ State +.
+ exception exc; +
+ pragma exception_init (exc,-20001); +
+ start +.
+ raise_application_error (-20001, "Error"); +
+ exception +.
+ What then outer_block.exc +.
+ dbms_output.put_line ("' outdoor Exception caught"); +
+ What then inner_block.exc +.
+ dbms_output.put_line ("'Inner Exception caught"); +
+ end; +
end;
When I run the above code, I got the following error.
Error on line 1
ORA-06550: line 15, column 9:
PLS-00484: exceptions redundant "EXC" and "EXC" must appear in the same exception handler
ORA-06550: line 5, column 1:
PL/SQL: Statement ignored
Script done on line 21.
------------------------------------------------- PLSQL Block 3 -------------------------------------------
To avoid this error, I changed the code again by qualifying exceptions with their block names. This time, I got a different error.
+ < < outer_block > > +.
declare
+ exception exc; +
+ pragma exception_init (outer_block.exc,-20001); +
Start
+ < < inner_block > > +.
+ State +.
+ exception exc; +
+ pragma exception_init (inner_block.exc,-20001); +
+ start +.
+ raise_application_error (-20001, "Error"); +
+ exception +.
+ What then outer_block.exc +.
+ dbms_output.put_line ("' outdoor Exception caught"); +
+ What then inner_block.exc +.
+ dbms_output.put_line ("'Inner Exception caught"); +
+ end; +
end;
Error on line 1
ORA-06550: line 4, column 38:
PLS-00103: encountered the symbol ". «» When expecting one of the following values:
), = >
The symbol"were replaced by". "to continue.
ORA-06550: line 9, column 42:
PLS-00103: encountered the symbol ". «» When expecting one of the following values:
), = >
The symbol"were replaced by". "to continue.
Question:
Pourraient several exceptions with the same name of the exception defined in the set of nested blocks plsql assign error codes using the pragma EXCEPTION_INIT? If there are errors in the PLSQL 2 blocks and 3, please suggest.
If the same thing could be accomplished by other methods, please explain.The problem in your code block 2 is that you have not only used the same name of the exception, but you have assigned them with the same exception code. If the code is different so it will work...
SQL> set serverout on SQL> ed Wrote file afiedt.buf 1 <> 2 declare 3 exc exception; 4 pragma exception_init(exc,-20001); 5 begin 6 < > 7 declare 8 exc exception; 9 pragma exception_init(exc,-20002); 10 begin 11 raise_application_error(-20002,'Error raised'); 12 exception 13 when outer_block.exc then 14 dbms_output.put_line('outer Exception caught ' ); 15 when inner_block.exc then 16 dbms_output.put_line('Inner Exception caught ' ); 17 end; 18* end; SQL> / Inner Exception caught PL/SQL procedure successfully completed. SQL> ed Wrote file afiedt.buf 1 < > 2 declare 3 exc exception; 4 pragma exception_init(exc,-20001); 5 begin 6 < > 7 declare 8 exc exception; 9 pragma exception_init(exc,-20002); 10 begin 11 raise_application_error(-20001,'Error raised'); 12 exception 13 when outer_block.exc then 14 dbms_output.put_line('outer Exception caught ' ); 15 when inner_block.exc then 16 dbms_output.put_line('Inner Exception caught ' ); 17 end; 18* end; SQL> / outer Exception caught PL/SQL procedure successfully completed. -
Met Win update for final. 45 default updates selected, and none were successful. My error code is 80243004. When I started my laptop this morning the start screen went to an error message which suggested an update to windows. No background or normal startup windows came. I do not have access to anything, but the link that sent me to the "update" screen, and so I have internet only access by browser. I don't have access to anything locally on my pc. Help, please.
Hello
What is the exact error message?
I suggest that you follow these steps and check:
Step 1: Reset Windows Update components
To reset the Windows Update components automatically, click the fix it button or link.
Click on run in the file download dialog box and follow the steps described in the fix it Wizard.
http://support.Microsoft.com/kb/971058Step 2: Download and install the latest version of windows install
Install windows install 4.5 from the link below:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
Step 3: Run an online scan
Run a scanner online to check any malware or virus activity. Link below will help you launch the free scan on the computer.
http://OneCare.live.com/site/en-us/default.htmThank you, and in what concerns:
Swati Keni-Microsoft Support Engineer -
AM very couldn't send Windows Mail or Messenger for more than a year angry. windows excuse is the error code to do with my server. the error code is your reference, not mine! Im very disopointed not being able to use the product directly to the description. GTE frustrated Windows defender blocking programs iv has spent £30, to try to correct the mistakes? and still no better off?
Submit all Live and Hotmail queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014. Installed their wake from sleep early support software.
Above error code invite you in this context: I wake up Mac in the morning after sleep. Transcend icon "wake up" and appear on the desktop (as it should). I check disk utility and the card is recognized. HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code? For about a week I missed that everything seemed normal. My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay. 90% of the time when I remove and reinsert the card, the operating system recognizes, all right. (There are a dozen times when I had to reboot for it to be recognized.)
All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL). This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution. FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences. Thanks in advance!
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
Error code: sec_error_ocsp_unauthorized_request
I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:
An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform them of this problem.
You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.
I tried to clear all - cache, cookies, history, blah blah blah
I am so bored of you people cost me more time.
It's fine in IE and Chrome.
If I didn't need Firebug, I would switch to Chrome right now.
edited because of the language according to the rules-forum-guidelines
You're right, it is not sensible.
Never made an exception for the site.
FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.
Thank you for the help, sorry for the earlier rant.
-
Error code: sec_error_ca_cert_invalid
Hello
I am trying to connect to my host via Plesk and now receive the error code: sec_error_ca_cert_invalid. I have read and tried the suggestions at https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message?esab=a & as = aaq but there is no option to add an exception and there is no encryption tab in the advanced settings (I use FF v.33.0.2).
Can you please help as I prefer to continue to use Firefox than any other browser.
Kind regards
Paul
Hello paul, this issue could be addressed in a next update - defining an exception can work with the beta version of firefox 34 already: http://www.mozilla.org/firefox/beta/
-
I have an error code: sec_error_untrusted_cert when I try to access my secure school Web site
I have an error code: sec_error_untrusted_cert when I try to access my secure school https://my.saintleo.edu/Web site. I run Firefox 32.0. When I have this error, it will not even let me add the exception, because it is "grayed out." Please I need help.
Thank youHello regba123, can you try to reset the file cert8.db in your profile folder, as described in "this connection is untrusted" error message - what to do?
-
I'm trying to access the administration page of GUI on my wireless controller. It's using a certificate issued by the vendor who makes it, so the names do not match. I created a permanent exception for the certificate. Whenever I try to access the site, I now get the following error every time:
The secure connection failed
An error occurred during a connection to 172.24.6.10:4343. Peer SSL reports incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
This page worked fine before the most recent update.
Y at - it a setting or something I can change to allow this page to load?
I saw reported problems caused by Firefox with the help of a few specific cipher suites that are not properly supported by the server.
A possibility to test this is to disable all the SSL cipher suites on the topic: config page (i.e. switches security.ssl3. * prefs that are true to false) and allow both to see if you can find the culprit and continue this suite disabled and reset others or continue its tests to see work encryption algorithms.
Do a hard refresh the tab with the page of 172.24.6.10:4343 via Ctrl + F5 after each change.You can open the topic: config page via the address bar.
-
Equium L40-156: graphics card problem - error code 12 in Device Manager
People of the night...
Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).
Tried the drivers that I had with the installer
Tried the drivers from the toshiba download page
Tried the drivers on the Microsoft Update site
Tried the drivers from the website of intelAll have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.
Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
Display settings do not display a connected device, DXDIAG had no idea either.Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere
Any suggestions, greatly appriciated
Ta
Hello
I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.
------------------------------------
+ Error code 12 +.+ This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.
+ Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
-------------------------------------Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
You can use the Toshiba Recovery CD/DVD of restoration!All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.
Check this box and report if the same error is displayed on the laptop with the factory settings!
Good bye
-
I have a HP Photosmart B210e more all-in-one printer-product # CN 219. First, I got the blank pages, then I printed a diagnostic report and it showed all colors except black. Then received the above error code. I have reset the printer out the cartridges and the print head. Clean the printhead, cartridges, and the error message continues. At one point also got an error message on the problems of print head, took out cartridges again, new and very carefully replaced print head cartridges and print head, bought a new black cartridge and still get the above error message. The message on the print head went. Now any suggestions? I have Windows 7. I hate to replace the print head and then find this does not solve the problem. It was cheaper to buy a new printer. Hopefully I can solve the problem, I do not like the product. All thiis started a few weeks after I had installed a black cartridge 564XL. Who could part of the problem?
Hey b_4,.
I see that you have a code 0xc19a0013 (generally ink system failure) on your HP Photosmart Plus B210. This is normally an indication of a hardware failure in the system of printer ink, heads of printing or the internal part of the system of ink in the printer.
I see you did a lot of troubleshooting for this problem. There is a document that deals with this type of error, however, of troubleshooting to the B210. I would advise to check through and making sure that all measurements are made. The document can be found by clicking here.
If all measurements were made, then they should consider the options at hand. This printer is guaranteed?
You can check the status of the guarantee of their printer by clicking here.
If you are out of warranty, then you have more options at this stage.
- You can buy a printhead for the HP parts store by using CN642a for the Photosmart B210 part number. This printhead currently sells for about $ $70.
- You can call the HP Technical Support on the upgrade program. The upgrade program is where you can get a newer refurbished model HP printer (similar to the current model), with a full factory warranty, at a discount from the new sale price at retail.
- You can buy a new HP printer from a retailer (it will have the same full factory warranty).
To contact HP Technical Support:
- If you are a resident of the United States or to the Canada, then the number to dial is 1-800-474-6836.
- If you are a resident of a different region, then please click here to access the global contact list for HP Technical Support.
Maybe you are looking for
-
HP touchsmart r520 1070 uk: 3F0 - no boot device error. Windows 10.
After having browsed the sites by chrome, I got big lag and and freezes everything. Then, I saw an error with blue screen - watchdog_violation or something like that. I restared my pc and from that moment, I lost access to my data and everything. The
-
Show/hide multiple Button controls increment/decrement is AWOL
As far as I can see (LV 2013), there is a missing feature in LabVIEW, whereby, when you select multiple digital controls, you can't show/hide their increment/decrement buttons: Here, I have 3 DBL, 1 I32 and 1 enum, but that goes for any combination o
-
Watch a movie on pc and want him playing with his original language and not English, how to play in its original language?
-
IE7 doesn't work anymore as I use it
Most of the time when you type a message and sometimes while browsing, I get the message that the internet has stopped working. I have contacted my provider and they say that this has nothing to do with them.
-
How to make the toolbar at the bottom of the screen to go
try to get the bar downstairs to go, unless I switch on him any help