Show/hide multiple Button controls increment/decrement is AWOL

Similar Questions

• Show/hide the buttons of different page

  Hi all

  I was responsible for creating an interactive PDF of several page which is basically a questionnaire. Each page will have one question with the results of all issues gathered in a table at the end. Ideally, I would like to answer each question to send to a cell in a table but I can't find a way to get there, so my solution was to use radio buttons to select the buttons for results and responses. I had planned to assign an action show/hide radio buttons to reveal the answer on another page. During testing I ran into a problem when you configure the action show/hide, it allows me to select a show/hide button, unless its on the same page as the option button! Does anyone know if there is a solution to this? If someone can not advice me how I build such a feature?

  Thanks in advance,

  JS

  In Indesign, you will need to install the buttons in response to the same page as the radio buttons for the construction of all hide / display the activations. It's the only way you will be able to set these properties. Once you have completed and tested, you can now move the buttons in response to another page. Option buttons to activate hide/show buttons to answer to a different page. I have a test file that shows, if you want, I can send it to you.

• Can someone tell me how to show/hide multiple layers at the same time?

  Hello

  Can someone show me how to make more than one layer visible or invisible, without having to click on each separate layer? -J' have more than 100 layers in a drawing, and it is very tedious to have to click on each individual layer to hide it or show it. I just started using Photoshop elements 13, on an iMac

  Thanks for any advice.

  You can Option , click on the eye next to the thumbnail icon of the layer to hide all selected layers, but.

  Option , click New to display all layers.

  Order click to change the visibility of the selected layer switch

  To hide multiple layers, select the layers, right-click on one of the eyes, and click hide this layer

  Repeat to repeat the visible layers.

  You can also click on one of the eyes and then drag down or to hide layers and invert to make the visible layers.

• With value of check box for show/hide radio buttons?

  I have created a pdf form. I have a checkbox and radio buttons several. I put it so radio buttons are hidden until the user clicks on the checkbox above him. I also put the box reset option on mouse-to top buttons. However, radio buttons are always selectable. I want to assure you that if one of the radio options is selected, the check box to be checked as well.

  Is there a bit of javascript, I could add to the check box to hide the option buttons if its value is not equal to yes (checked)?

  You can use code similar to

  If (event.target.value == 'Yes') {}
  selected - display radio buttons
  this.getField('Radio_Button1').display = display.visible; view the radio button
  } else {}
  Show box unchecked hide radio button and reset the field
  this.getField('Radio_Button1').display = display.hidden; Hide radio button
  this.resetForm (["Radio Button1'"]); Disable the option button
  }

  But YOY will have to change the field "Radio Button1" name match your fyouor domain name to the Group of radio buttons.

• Show/hide the buttons on the tabular form region

  I have a classic tabular form with standard buttons: AddRows, RemoveSelectedRows, cancel, Save. What I want is to have the button visible to AddRows only when there is no given on the form (the source table is empty). When the user clicks the AddRows button, a blank line apears. Right now I want to show, save, and Cancel buttons (buttons remove is covered by the current Condition). And when the user deletes all the data in the table, I want to hide all buttons except AddRows.
  
  How to do this? Thanks in advance.

  Hello

  If you use Apex 3.x and you have created a table by using wizard, you already have branch page.
  Change this branch and add to the query field

  &REQUEST.
  

  BR, Jari

• Show/hide multiple fields on list drop-down choice to help if else

  Goal is to display or hide the three fields according to a choice of menu drop-down. If show X, hide if Y.

  How a syntax on line error 6 when adding to the trigger mouse-to the top of the field drop-down list.

  Are several actions allowed for each if condition?

  if(event.target.value = "Yes")
    getField("Top_inches").display = display.visible;
    getField("Top_numerator").display = display.visible;
    getField("Top_denominator").display = display.visible;
  else
    getField("Top_inches").display = display.hidden;
    getField("Top_numerator").display = display.hidden;
    getField("Top_denominator").display = display.hidden;
  

  You have at least two syntax errors. The first is that you used the wrong operator for comparison. 'Is', not '=' (this is the value assignment operator).

  The second is that you did not put blocks of code inside the curly braces.

  If your code should be:

  if (event.target.value == "Yes") {
      this.getField("Top_inches").display = display.visible;
      this.getField("Top_numerator").display = display.visible;
      this.getField("Top_denominator").display = display.visible;
  } else {
      this.getField("Top_inches").display = display.hidden;
      this.getField("Top_numerator").display = display.hidden;
      this.getField("Top_denominator").display = display.hidden;
  }
  

• JS help please: show/hide Radio button option

  Hello community,

  I'm not good with JS and need your help!

  My client has 3 payment options (radio button):

  • Credit card (default selection with possibility to put any credit card info in "'paymentdiv ' tag div")
  • PayPal
  • Bank transfer (to choose the Bank of dorpdown in "bankpaymentdiv ' tag div)

  The following code hides the option of credit card if the user chooses the option Paypal or bank transfer

  function ShowCCFields(val) {

  if (!document.getElementById('paymentdiv')) return; 

  if (val != 1) document.getElementById('paymentdiv').style.display = 'none';

  else document.getElementById('paymentdiv').style.display = 'inline';  

  }

  HOWEVER, if I select Paypal, it hides card banking option (as it should) - but not the payment of the Bank of field option. How do I get there?

  This should do it:

  paymentdiv

  bankpaymentdiv

  See you soon.

• show/hide the button with the icon enabled when the condition is met

  Hello
  
  I created a B button with an icon of a sign of the green check mark.
  It must appear next to another A button when a condition is met.
  
  How can I better get this working B key, without using something else than the APEX.
  
  The condition is that some data has been inserted by clicking A button or simply exist in the database table.
  
  I tried conditional display of point with conditiontype "PL/SQL Expression.
  but could not make it work.
  
  TNX to tide me over.
  
  Cara

  Hello

  If you use the condition EXISTS (SQL query returns at least one row)?

  This could give idea how
  http://Apex-SMB.blogspot.com/2009/05/How-to-determine-if-user-can-view-apex.html

  BR, Jari

  Published by: jarola 18 November 2009 16:07

  Oh,.
  I paste the wrong link and can not find more good.
  Well anyway in this link is also example to condition EXISTS

  To meet this requirement I can add a condition (SQL Exists) to the Report 2 region on Page 2:
  

  It takes something similar and your table selection

• Avoid complete when page is rendered dynamically show/hide elements in a page

  Hi experts,

  
  I use Jdev 11.1.1.5. My use case does not show/hide multiple buttons/panelBoxes on the same page.

  My approach is to define the rendered property pointing to a session variable

  <af:panelBox  rendered="#{sessionScope.render_panel1}"
  <af:commandButton action="#{backingBeanScope.myBean.configureRenderButtons}" rendered="#{render_button1}"/>
  

  .. .and go to the same page by using an action method in a managed bean:

  public String configureRenderButtons() {
     JSFUtils.storeOnSession("render_panel1", "true");
     JSFUtils.storeOnSession("render_button1", "false");
     ...
    return "same-page.jspx"
  }
  

  My problem is that I noticed that this full page is rendered whenever I press the button. So as soon as the page has grown in size, it became a bit slow for end users.

  Could you please advice on this?

  Kind regards

  Jose.

  I got the solution.

  I changed:

  (1) changed to visible, rendeded

  (2) partialSubmit added to the button

  (3) partialTrigger added to the component I need to show/hide (panelBox)

  (4) action changed to actionListener

  Hope this helps (and hope it's a good practice, please post!)

  Jose.

• Increment/decrement buttons

  Hello.

  I have a question here.

  How can I use a single buttons to increment/decrement control several digital controls?

  I can use different cases to define what particular digital control is under controlled. Each numerical control has its private pair. Can I use a single pair of control several?

  Thanks for the help!

  You can use Boolean keys the incrementing and decrementing of the buttons for a group of numeric values.  Then use local variables (with caution) to update all numerical values.  I say this cautiously because that depending on how and when you read the numeric values in your code, you can read in the middle of update values and read some that have been incremented/decremented and some that are still the previous value.

• Using the menu button to show/hide TOC CP7 intermittent

  Hello

  Forgot to mention using CP7, I would add also that it slides that do not work, when the Mneu button is clicked for the first time, shows the button pushed, but on the 2nd time, there is no action at all the...

  I have a problem when the menu with its knock adv to show/hide action button, does not always.

  I went through all the slides in masters and made sure that I have the same settings for each, but on some slides, it will display the table of contents but can't hide after pressing the button Menu again. This is assured, there is no associated transition with the key.

  It works well at every time whebn using the small line up double, but we need the user to use the button and do not rely on these arrows...

  Anyione elsoe had similar problem... ?

  See you soon
  Sabine

  Hi Rod,

  Thank you for that. They are actually custom buttons in our workplace, rather than a usual adobe PlayBar... However, what really strange is at the last minute, I thought copy button and then remove the original button and paste in the copy (don't ask not even why I thought this might work..) but it worked and all is good now...

  Thanks for responding...

  See you soon

  Sabine...

• can radio buttons show/hide the info in an interactive pdf?

  Hello. I have a question to which I have been faced with during some time... hoping someone can help.

  I create a document in InDesign CS6. It's basically a guide with a joint questionnaire.

  I have forward and back buttons work properly - so that they take you from one page to another.

  However, the more difficult question is I want to have interactivity with the use of radio buttons and eventually the check boxes. Thus, for example, on page 1, I have a question multiple choice where there are three choices. Clicking the wrong answer shows a block of text saying 'no it's wrong' and clicking on the appropriate radio button shows the words "Yes, correct."

  I have created three blocks of text and make it into a multi-state object.

  Three problems:

  1. option buttons seem to be the option for "the State" in the buttons and Forms dialog box
  2. even if that were the case - the State Road seems to be only swf, non-interactive pdf form - is there a way to change this?
  3. script assuming that there IS a way, everything can be put in place so that instead of using radio buttons I have use of check boxes that only give the correct answer if the correct check boxes are selected.

  I would stick to indesign to do this, however, I think that the option is perhaps more suited for this problem?

  Many thanks in advance,

  SunsV

  1 - make 3 images and convert it into boxes option...

  Text blocks 2 2-make (Yes, his right) (No, the wrong) and convert it to buttons - rename it (Righ, evil)

  3 - Click on each radio button and apply action: Show/Hide button and form and on the visibility to activate the globe eye for buttons wrong or right.

  

• I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  Is attached a screenshot of my screen with the context menu to show/hide tabs. I want to delete some of them and let others. Please help me to know how. Thank you!

  Hmm, maybe this "one-time" imported into the new preference? Try this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cust and make a pause so that the list is filtered

  (3) double-click the preference of browser.uiCustomization.state and the content must be highlighted in a small dialog box.

  (4) copy the whole line and paste it into Notepad and save it as a backup.

  (5) in Firefox, click on the button '3-bar' menu > developer > Notepad. Remove the comment that appears and paste data preferably, that must appear on a long line. Click on the "Pretty Print" button to make it more readable.

  So I hope that you can spot the extra toolbars and change them out, taking care to preserve the commas between the elements.

  I don't have the extra toolbars in mine, but I copied and pasted back this spaced format and Firefox was able to handle it well. I went into customize and moved a button, and when I left, Firefox has rewritten the preference set as a single line. Assuming that yours works fine, then you can get rid of the backup from step (4).

• Show/hide fields based on T/F control - only showing or hiding, not both.

  Hi Forum,

  I'm looking to show/hide fields address based on a T/F control (or a single entry check box).

  My online form has a number of business address fields, a T/F control and a number of postal address fields. I want the mailing address fields to hidden when a user clicks on the box 'As Above' (and demonstrated once again if they click this box once more).

  

  I used the sample code (https://docs.oracle.com/cloud/latest/process_gs/CPRCW/GUID-F3BD3386-F333-45C6-AA56-C77136D169E5.htm) as a starting point for my Web form rule and it works as expected the first time that a user clicks area T/F (i.e. He's hiding the post fields) but it does not work the second time they until it clicks (where I assumed that fields would still be visible).

  The T/F box has the following options:

  true = as above

  false = No

  And my web rule looks like this:

  If (AsAbove.value = true) {}

  PostalAddress.visible = true;

  PostalState.visible = true;

  PostalPostCode.visible = true;

  } else {}

  PostalAddress.visible = false;

  PostalState.visible = false;

  PostalPostCode.visible = false;

  }

  
  

  I tried the same thing (with similar results) using a Checkbox control with a single option (according to the example code)

  If (PostalAddressCheckbox [0] .value == 'As Above') {}

  PostalAddress.visible = true;

  PostalState.visible = true;

  PostalPostCode.visible = true;

  } else {}

  PostalAddress.visible = false;

  PostalState.visible = false;

  PostalPostCode.visible = false;

  }

  As verified does not seem to be supported, is there another way to accomplish what I'm after, or I missed something somewhere simple (and y at - it documentation on the T/F control)?

  See you soon,.

  James.

  Hello

  Web Forms address these true-false as the boxes and, as such, in the form of tables.

  You can see if you try to print the TrueFalse value. You should get something like java object lang @XXXXXX

  Try to put the code as follows (in bold and underlined):

  If (AsAbove[0].value = true """""") {}

  PostalAddress.visible = true;

  PostalState.visible = true;

  PostalPostCode.visible = true;

  } else {}

  PostalAddress.visible = false;

  PostalState.visible = false;

  PostalPostCode.visible = false;

  }

  This should do the trick

  See you soon

  José

• What happens if selected fonts "hide" or "show"? -option of Control Panel on pc

  Hello

  If I see for example an info "missing font" in the software Indesign - I can have this 'missing font' installed on my computer but Indesign are unable to find, because this font is selected as 'hide' the controlpanel-management of fonts on my computer? -should I select/turn to 'show' - for Indesign can find this missing font on my computer?

  It is impossible for the software which uses the fonts - to find the fonts that are chosen as "Hide" in the Control Panel on a computer?

  What is the purpose of "hide" or "show"? As "capable" and "incapable" is to say 'show' and 'hide '?

  Someone please clarify this. I don't understand. I would appreciate your response.

  mohammadm41557414 wrote:

  Well I'm not CS6 talking the monthly paid Indesign.

  [...] It seems that the best thing to do is to "unmask" the folder fonts fonts OS to ensure that they are not hidden from the Indesign software.

  Sorry, you're not.

  Of course, you can display font, if there is place in your folder hidden fonts. It will do no harm.

  Or - if desired - hide a bunch of them with equal success.

  The fact is - InDesign just don't like on this subject.

  If you have problems with the fonts in ID - find somewhere else. Forget that hide and show things.

  --

  BTW, just tested for you to ' more 'last n' Win10 / InDesign2015.2.

  No surprise here: nothing has changed, the behavior is the same.