Error code 80070002 in vista

Similar Questions

• Error code 80070002 SP2 Vista Basic

  I have Windows Vista Basic. I'm updating the Windows Vista SP2, KB948465. I get the error code 80070002 while DOWNLOADING via Windows Update. I deleted the temporary update files, I ran the system update tool. I also downloaded and tried to install the SP2 file manually. I can download it, but when installing, it fails and gives me the following message is displayed:

  Error: ERROR_FILE_NOT_FOUND (0 x 80070002)
  Any help would be appreciated.

  Hello

  Method 1: Run the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2: Try the following and see if it helps

  You receive an error code '0 x 80070002' or '0 x 80070003"after you download an update from Windows Update, Microsoft Update or Windows Server Update Services http://support.Microsoft.com/kb/910336

  Method 3: Disable the security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, your antivirus software is

  disabled, your computer is vulnerable

  We post back with the results.

• New satellite does not download Vista update - error Code 80070002

  Hello

  I bought a new laptop Equium PC World of and when passed as is the norm, the operating system (Vista) try to download updates from Microsoft.
  However, I'm struggling with what he stuck after a number of successful downloads.

  Now when I go to "Windows Update", I get the error found error Code 80070002.
  Can anyone help with this?

  Why knows what the problem is here.
  Try to roll back OS to an earlier time using System Restore tool and try again. To be honest, you must disable automatic updates and prior to the update, you should check the list of available updates and install the correct updates that can be useful. That means installation Important or recommended updates. All the optional updates as some driver updates, you must disable.

• Vista Ultimate x 64 can't get/install updates to windows update, error code 80070002 and 0 x 80070000

  I have Vista Ultimate x 64 and August 2009 round, my computer stopped getting updates.  I get the following error: Windows not can find new updates error code 80070002, I tried all of the fixes suggested and it will not always kept up-to-date.

  It also doesn't let me do manual updates.  When I try to use the stand-alone Installer, Windows6. 0-KB947821-V15 - X 64. MSU, I get the following error: 0x80070000d.  Any help/suggestions will be greatly appreciated.  Thank you

  Hello

  You can try the followingsteps and check if it helps.

  Method 1:

  You can read the following article and try to run the Fixit and check if it helps.

  Diagnose and automatically fix common problems with Windows Update

  Method 2:

  You can also try the steps in the following article and check.

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

• Error code: 80070002 (cannot install updates)

  How the error code 80070002 can be cleared for the installation of the windows updates?

  Windows XP -

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Vista -

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Windows 7

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-Error-80070002

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• Windows Update, error code 80070002

  Whenever I try to install the new updates, it ends with the error code 80070002.

  Windows Vista, 32-bit.

  Petr,

  http://windowshelp.Microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx

  If the problem persists after you follow the steps above, go to the microsoft update solution Center website to request support by e mail. https://support.Microsoft.com/OAS/default.aspx?Gprid=6527&St=1&wfxredirect=1&SD=GN>

• Stops Windows Update sp1 with error code 80070002

  I have Windows Vista Home Premium & I get an error code 80070002 when I try to download sp1 on windows update. I did all the trouble shooting help & support says the error always comes to the top. What continues? I don't know what to do.

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 - ERROR_FILE_NOT_FOUND
  TaurArian [MVP] 2005-2010 - Update Services

• Error code 80070002 during SP1 installation

  Original title : I can't download sp1. Error code 80070002 continues to rise. Aid has continued to tell me to delete updates.   Rob

  Code 8007002 continues to rise.  After troubleshooting, this brings me to the data store to remove the updates failed. However it doesn't let me access this file. After looking in the file revision updates, he showed that this update has been a failure in recent years.  Also, until I get this installed I can not upgrade to windows 7 which I am doing and to download the most recent excel progam

  Hello

  1 are you able to install any other windows update?
  2 have you made changes on the computer before this problem?
  3. What are the troubleshooting steps you have tried?

  Try the following and see if it helps.

  Method 1:

  Windows Update Error 80070002: http://windows.microsoft.com/en-us/windows-vista/Windows-Update-error-80070002

  See also: http://support.microsoft.com/kb/910336

  .

  Method 2:

  Disable security software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software
  Note: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3:

  Download and install the update manually and check if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

• I get error Code 80070002 when I try to install Service Pack 1.

  Vista will not be updated to the Service Pack 1 or 2

  I have Vista and have windows automatically updates.  Of course, it is never updated with the Service Pack 1 or 2, and when I go to Windows updates, it says I have no updates available.  Recently I had trouble with my anti-virus software, and they said it was because my computer has not been updated.  I didn't know that I was not common.   However, I get error Code 80070002 when I try to install Service Pack 1, so SP2 cannot be downloaded until I get this one.  I tried everything I could find as an aid, but they were especially when people had problems years ago, when it came out.  What can I do?

  Hi kimber222,

  If these steps are not successful, the next step is and InPlace upgrade. This process is an alternative to reinstalling the operating system. During the process, some of your custom Windows settings may be lost.

  Run a repair installation will restore your current install of Windows to the version of the installtion CD/DVD. You will have to reinstall all the updates that are not included on the CD/DVD.

  Although this process should not damage files and the applications installed on your computer, it is always safe to make sure that you have a recent backup of your data and how to reinstall all software you have installed.

  Fill out the next step for the InPlace upgrade:

  1. Close all open applications.
  2. Insert the Windows Vista CD/DVD intot he computers CD/DVD drive.
  3. In the windows installation program, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exein the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yesto accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

• Windows Update does not install the updates from 14/04/2009. Error code 80070002.

  I'm running 32-bit Windows Vista Home Premium on a Dell Dimension E520 PC desktop with processor Pentium dual core and 3 GB of RAM.
  Reasonably up-to-date hardware. Well protected and all software security entirely to so far.
  My problem that goes from Windows Update is not install updates from 14/04/2009 and returns the error Code 80070002.
  I followed the advice and went in the Windows Software Distribution folder and remove all the contents of the data store and records downloads and tried again about thirty times now.
  I get regarding the acceptance of the license agreement and clicking on, ok, when Vista dims the screen and asks if I started it and then the error message in Windows Update, saying: "some updates were not installed."
  Is not a computer expert, I guess that what is described in help Windows Update error Code 80070002 is the same as 0 x 80070002 for which I found advice on a Microsoft page to save these commands
  net stop wuauserv
  CD %systemroot%\SoftwareDistribution
  Ren Download.old download
  net start wuauserv
  as a windows batch file and run as administrator.
  I now have a download folder and Download.old folder. Fascinating but no help at all!
  I infer that the numbers of 0x0 are my six error codes failed attempts to install Vista Service Pack 1, a few months ago who always ended up with an unusable computer suspended with a black screen and the white writing showing 46 thousand of 96 thousand file and something, followed by a number of 0x0.
  The only way I could get of these attempts was by booting from the Installation of Vista disk, masking the Service Pack 1 update and using the system restore, but that's another story.
  Have an impact on my current problem, I wonder?
  For absolute clarity are the updates that won't install:
  Explores update for Internet Explore 7 edition (KB963027) 14/04/2009 (Just editing that.) Typed a wrong number in a first time. Sorry).
  Four updates of security for Windows Vista (KB952004) (KB956572) (KB959426) (KB960803)
  Windows Malicious Software Removal Tool - April (KB890830). (I downloaded it manually and run it from my office and we found no problem).
  Update of security for Microsoft Office System 2007 (KB960003)
  Update of security for Microsoft Office Excel 2007 (KB959997).
  I'm at a loss what to try next.
  FYI, I use Uni-bleu Power Suite 2009, McAfee Total Protection and Ad-Aware Anniversary Edition with Ad-Watch Live on.
  I tried to do everything that it with Ad-Aware died, but my hunch is that the problem is in Vista ot the updates themselves.
  I'm quite competent with guests of orders, not to mention manually editing the registry!
  However, any help would be received with gratitude and I guess that if the instructions are evidence of fool I have very carefully follow step by step.

  I have the same symptoms: from a distinct point in time updates of windows works more and every time returned the error code 80070002.
  After a few hours, I found the solution: sfc/scannow reported the wuauclt.exe file.
  And the reason was: McAfee virusscan put this file in quarantine. He is falsely W32/Generic.worm.aa in there.
  Restore this file from the GUI of McAfee completely solved this problem.

• Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  Original title: windows updates 7

  Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either.    Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  I am at a loss... Anly help would be welcome.

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
  2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

  Press enter

  3. open Control Panel > Windows Update and Windows 10 should begin to download...

  If this does not work:

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• "Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed?

  " Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution for the error Code: 80070002 0 x ' OR '0 x 80070003 '.

  To resolve this problem, remove the download directory and then to return to the update sites. To do this, follow these steps:

  1. Stop the automatic updates service. To do this, follow these steps:
     1. Click Start and run, type services.msc, and then click OK.
     2. Right-click the automatic updates service and then click on stop.
     3. Minimize the Services snap-in.
  2. Rename C:\Windows\SoftwareDistribution directory. To do this, follow these steps:
     1. Click Start, run, type cmd, and then click OK.
     2. Type cd %windir%, and then press ENTER.
     3. Type ren C:\Windows\SoftwareDistribution SDTemp, and then press ENTER
     4. Type exit and press ENTER.

     Note When you delete the folder % windir%\softwaredistribution, the history list is erased from the "Review your Updates" section of the Windows Update Web site. This action will not affect the updates installed on your computer. Subsequent updates will appear in the history list.

  3. Start the automatic updates service. To do this, follow these steps:
     1. Expand the Services snap-in.
     2. Right-click the automatic updates service and then click Start.
     3. Close the Services snap-in window.
  4. Visit the Windows Update Web site, Microsoft Update Web site, or the WSUS server again, and then download an update.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Error code 80070002 in Windows 7 updates

  K I install the Win 7 updates optional - ex language packs, but they all fail and come up with the "error Code 80070002.

  I deleted temporary files in "Windows - C:\Windows\SoftwareDistribution - downloads & DataStore, some files in the data store could not be removed (DataStore.edb & record logs).»

  What can I do to solve this problem, because it leads me into the wall!

  Specifically , that "temporary files in Windows - Software Distribution" are you referring to?

  80070002 ERROR_FILE_NOT_FOUND
  The system cannot find the specified file.

  Since we do not know what has been removed from C:\Windows\SoftwareDistribution, suggest first reset you update components by running the Fixit here: How to reset the Windows Update components?
  The cleaner method is to download and save the Fixit.
  Then Configure the system for a clean boot .

  Make sure that the native Windows 7 firewall is enabled because the system must be connected to the internet when the Fixit is run.
  Once the system has been started in the pure State, run the saved Fixit, MicrosoftFixit50202.msi and choose aggressive mode. The Fixit will clean the subfolder of Software Distribution, among other operations.
  And the latest version of Windows Update is also installed.
  When the Fixit is complete, restart the system , if you are invited to or not.

  See if the system is able to update now. IF it is possible, then cancel the clean boot procedure and see if it can still be updated.

  If the same error occurs, download, Save , and then run
  Update system (or CheckSUR) analysis tool while remaining in the clean boot state.

  MowGreen Services consumer safety update

• error code: 490 on vista update__What does that mean?

  I try to make update and getting error code 490 on vista 32-bit

  Hi kienzlejk ,

  Welcome to the Microsoft Answers site!
  
  Could you please tell us what update fails?

  1 reset the Windows Update components:
  To reset the Windows Update components automatically, click the fix it button or link.
  Click run in the file download dialog box and follow the steps described in the fix it Wizard.
  http://support.Microsoft.com/kb/971058

  2. Windows Update Agent
  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  Now try to install the updates.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  Hi lisafuller,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. What is the serial number and model of the printer?

  4. what happens when you try to access that Windows update and Control Panel?

  5. do you have security software installed on the computer?

   

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Method 2

  If the previous step fails, then check out the link below and run them the troubleshooter, check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Due to Windows update run the Windows Update troubleshooting, check if it helps.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Also check if you can access control panel from safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode