Error Code 80071AA7

Similar Questions

• Cannot install KB2653956 get error code 80071aa7

  Every day that I get a message that I need to install update KB2653956.  I have download and restart my computer, but it goes back to the previous settings when you set up.  Then, I get error code 80071aa7 when it fails.  I tried the Mr FixIt, reset Windows Update, disable my antivirus and firewall and I always get a reminder to install the update. Someone at - it ideas?

  Hello

  Method 1:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

   

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 3:

  If the steps do not help, I you suggest to perform a clean boot and then try to install the update manually.

  Step 1:

  Clean boot helps eliminate software conflicts.

  Follow the steps mentioned in the article below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.

  Step 2:

   

  You can download the update manually from the link below.

   

  MS12-024: vulnerability in Windows could allow remote code execution: April 10, 2012

  http://support.Microsoft.com/kb/2653956

   

  Hope this helps and keep us posted.

• Update Windows Vista error code 80071AA7

  Need help with fixing update error code 80071AA7

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

• Update fails every day KB2653956 & KB2675157. Error code 80071AA7. Help?

  My computer turns off every night and early morning.  I have to restart.  When I do it says that the important updates have failed.  I try to install.  They say that they are installed, then go to configure.  Finally, they say that they have not yet.  The numbers of installs it are above.  Both have the same error code.  What is going on?  How can I fix it - do not want to spend money for new programs.

  Perform a clean boot to disable all third-party applications. The goal is to find out if there are third-party applications or services, causing a conflict - then try Windows update in a clean boot state.

  Refer to: how to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

• Cannot install updates. I get an error code "80071AA7". Help I don't know anything about computers.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Try to do a reset. See http://support.microsoft.com/kb/971058 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for Windows Vista (KB978886) security fails to install on my computer and I get this error code: 80071AA7. ___

  I tried to install this for 2 weeks, I did a restore and it will not install. Help?

  I have an Acer laptop under Vista 32 bit.

  Adding:

  Perform a clean boot to disable all third-party applications. This is to find out if there are third-party applications or services, the cause of a conflict.

  Refer to: how to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Vista - update security KB982381 fails with the error Code: 80071AA7

  Update Cumulative security for Internet Explorer 8 for Windows Vista still fails to install.  At the beginning I had 6 automatic updates which could not install (usually NOT a problem), so I individually installed each... reboot after each update.  Success on those.  I tried to update KB982381 more than 8 times without success.  I don't use IE as my browser.  My computer is constantly trying to install this and reboot... never works.  Don't know what to do.

  I did everything you suggested in the last email and I am sorry to say that the update has failed once again.   I use Mozilla Firefox as my browser, but I open IE * to run its difficulty etc.  I ran Windows Update (reset) in aggressive mode (what settings it reset?  I noticed when I went to the Control Panel, to look for updates and it listed that it is 'never' updates etc.).  When I did find updates sent to download, it came with one that was a failure and the other for Windows Defender.  This one has installed fine.  Let me know what I should try!  Thank you

• Windows Update fails for KB980182 with error code 80071AA7 and a few references to sqmapi.dll

  ... Support as good phone & E-mail have told me that my installation of IE8 is corrupt and that I should reinstall Windows.

  IE is part & parcel of your operating system (e.g., Windows): If IE8 is "corrupt", Windows is corrupted, too. If this is the case and you are not ready to control depth for hijackware, only a clean installation can solve many problems.

  If you choose not to, then be... but understand that your personal data (for example, online banking user names & passwords) still at risk with the computer in its current state (that is, not fully-patched).

  In & out.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  I'm ready to do the checking hijackware.  Just have not been through a thorough check before.

  In addition, based on one of your last posts, I checked to see if I had SQL Server installed.  Yes, I did.  Both a mini-edition 2005 old (forget which exactly edition), as well as a complete edition in 2008.  This could have come as I soak in access programming.  The two versions of SQL server is uninstalled, I still hit the same problem with sqmapi.dll

• Error Code 80071AA7 application Microsoft update - Cumulative security update for Internet Explorer 8 for Windows Vista (KB2618444) ""updates can not be configured. " Changes in return ".

  OK, I'll be back and I see your scary prognosis. I guess it would take some time to complete because it invovled five years of updates from McAfee to be reinstalled. If it takes about an hour, I should be able to get this done.

  I have reviewed your steps again and have a question before I enter into it-

  Given that this procedure you built has several reboots, how can I stop Windows trying to do the update of KB2618444 during each reboot of the tel? According to your interior, the update in question should be attempted that after reinstalling McAfee is carried out correctly, right?

  See you soon.

  Repost...

  The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Given that this procedure you built has several reboots, how can I stop Windows trying to do the update of KB2618444 during each reboot of the tel?

  Don't worry about this. In any event, step #11 "purges" the queue KB2618444.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Comment: IMHO, McAfee Security Center is one of the worst (if not the worst) & most precarious security market suites. A casual survey of the malware removal forums shows that AVG Free is installed on most of the computers infected with the suite McAfee runs a close second.

  [There is a reason that so many ISPs around the world offer McAfee Security Suite as a freebie: customers get this that they don't pay for.]

  If it was my computer, I would install Microsoft Security Essentials (free) instead of reinstalling the suite McAfee at the #3-Oui stage, even if the subscription does not expire until September 2013.

  ===================================================================
  WARNING: Displayed AS IS without any warranty. MS MVPS represent or work for Microsoft

• Failure of Windows Service Pack 2 - 0x80071aa7 error Code

  I tried several times to install this update and finally just ignored, because it does not constantly. But now the programs are in need, so I tried again and come up with the same result.

  I just tried the standalone download of Service Pack 2 of Windows. Downloaded and installed fine, but after the restart, he completed the phase 1 very good, but arriving at step 2, says that it is "some changes could not be made. Returning from the changes. "He then stops, tries again, falls on the same subject, and then starts and displays the following message:"Installation failed - could not open the file transactionally, because its identity depends on the result of a unresolved transaction. "Details - error: ERROR_FILE_IDENTITY_NOT_PERSISTENT (0x80071aa7).

  I tried looking for other forums, but found no answer. Help, please!

  I am running Windows Vista Home Premium 64-bit on an HP Pavilion dv4 laptop.

  Hello

  Jump down to audits of programs malicious and if necessary come back here:

  Did you use the troubleshooter above? KB947366?

  Disable you and even uninstall your antivirus/security programs? Stop or
  Uninstall any firewall other than Windows Firewall.

  Have you tried Safe Mode Setup?

  You download and install rather than using Windows Updates?

  You have enough free disk space on the Windows drive?

  See Ronnie Vernon's response in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80071aa7/70a484f7-fca5-4d6b-BAFF-805160380a86

  =============================================

  There is also a good chance that malware are involved.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

• Code 80071AA7 with KB2641653

  I received the error code 80071AA7 when you try to the recent update KB2641653. I tried the solution of Vernon, posted on December 18, 2008, without success.  Any idea?

  Hello

  I suggest you follow the steps mentioned below:

  Method 1:

  Reset Windows Update component and check if the problem persists. Follow the steps in the link:

  http://support.Microsoft.com/kb/971058

  Method 2:

  Download and run the update of the system since the link tool and check if the problem persists:

  http://support.Microsoft.com/kb/947821

• get 80071AA7 error code when you try to install windows vista sp1

  get 80071AA7 error code when you try to install windows vista sp1

  80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
  The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

  (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
  How to perform a repair for Vista Installation

  All personal data will be kept. All updates applied previously will need to be reinstalled.

  (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

  3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

• Two important updates do not install it. Error message: 80071AA7

  After the automatic update for several months because of problem with the automatic update runs do not, I took my laptop to a local store to help MS. They help to get almost all of the updates to install. But two updates, namely: the update for windows vista (KB3081320) and (KB3067505) is not installed when you restart. The error code is 80071AA7. Can someone help me? Thank you 1 million.

  Hi David,
  Thanks for posting your query to the Microsoft community. Sorry for the delay in responding.
  What application or antivirus security suite is installed and your current subscription? What (if any) third-party firewall is installed? A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  I suggest you to follow the steps in this article and check if it helps.

  Hope that the information provided has been helpful and let us know if you need more help. We will be happy to help you.

• error code - 50

  I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

  Error code - 50 on iPhone

• I keep getting an error code (-1) cannot restore iphone message what can I do?

  My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

  Try to restore 2 times more. If get the same error message

  take the iPhone at the Apple store nearest for a free evaluation.

  Once the diagnosis is complete, staff will explain your options.

  -1 is the hardware failure error code. Assuming that no damage to the

  your iPhone is not jailbroken, you may qualify for a reduction

  the price of the replacement warranty.

  Make a Genius Bar reservation to avoid delays.

  http://www.Apple.com/retail/Geniusbar/