Windows Update fails for KB980182 with error code 80071AA7 and a few references to sqmapi.dll

Similar Questions

• Windows updates failed to install with error code '80092004' and ' 80246007".

  original title: How do I know if Internet Explorer 9 is installed correctly or not?

  According to the history of my update, IE put 9 updated (?) correctly installed in July 2011.

  However, I have several entries after this date for updates failed. There are 2 error codes: 80092004 and 80246007.

  The version I have on my laptop is still IE 8.

  I don't use IE very often but would get updated and stop doing the update failed messages.

  I should try a manual download and install or is there a better alternative?

  Thank you.

  Hello

  Failed updates are all related to IE 9.

  I followed the two links you posted above. I have run windows update fixit, who said it was successful. I then tried to install IE9 on my update list, and there no, same error code: 80092004.

  I tried a manual install. That failed too.

  As usual with a microsoft update failure I now long in circles. When I click on a screen to learn more about the failure, or click to learn more about the error code, I headed for the same items, the same solutions, that do not work.

  Since I use IE as seldom as I can, I'll stay with IE 8 and hide the update to IE 9. This seems the best solution to get out of my hair.

  Thank you for your interest.

• Windows Update fails to install with error code 8e5e03fb

  15 July Windows Update suddenly stopped to download and install some important files required to update Vista Home Premium SP1. The error code is still 8e5e03fb, not recognized by Microsoft, although I saw messages on Forums dating back to April 2009, mentioning only the code. I worked with Alan Leon, Support Engineer, but without success. Some updates pass through but none are helpful to the OS or Internet Explorer. So far, none of the Knowledge Base articles have been useful. Only one file, c:\windows\system32\dllcache\wucltui.dll, is missing from my system, but Alan Leon has not confirmed that it might be relevant. Alan suggested that my problem might be connected connection but his suggested change my settings did not bring the expected results. My ISP has a function that allows me to see the data to flow both up and down. When data are sent or received, it can be seen clearly but when Windows Update is running, there is no data flow showing.

  Hi Kanizsa,

  Let us know what you have already done, the security software installed on the computer and the updates that are available for installation.

  Follow the steps mentioned below:

  (I) check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  (II) rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  (III) Re-register DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. At the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  (IV) empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. In the Services (Local) pane, click Automatic updates and then click on stop.
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note by default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.

  5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6. In the Services (Local) pane, click Automatic updates, and then click Start.
  7. Restart the computer, and then run Windows Update again.

  Article number: http://support.microsoft.com/default.aspx/kb/822798

  (V) disable the security software

  (VI) SFC Run scan
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.

  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The scan may take a while, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  Thank you and best regards,
  Abdelouahab

  Microsoft Answers Support Engineer

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows xp kb2718704 update fails to install with error code 0 x 8007005

  Windows XP KB2718704 update fails (approx. 5 + times) and gives the error code 8007005 0 x. Update is so important? Why is it a failure? Have used MSFixit, unresolved problem. I'm puzzled that MS is not problem. What is the SOLUTION to this problem.

  Arya-
  Thank you for your response. I didn't have the ability to use your suggestions. MS auto updates had popped up when I stopped, and finally, the update did the trick.
  Thank you

• Windows Vista update KB948465 update failed to install with error code 80070017

  My computer has tried intaslling this update (Vista SP2) for about a week and a half now. Even after restart and other, I can not get a successful installation. And now Windows Explorer restarts itself while I use the computer in the workplace... Can anyone offer assistance with this error and what I can do to solve the problem?

  Hi DMO523,

  I suggest you to download a Service Pack 2 standalone package and install it in Mode without failure.

  See the links below for more information about the Service Pack.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791/

  Depending on whether you are running 32-bit or the 64 bit version of Windows Vista, you can download the Pack from the links below.

  To determine if you have 32-bit or the 64 bit version of Windows Vista, click the Start button, right-click computer, and then click on Properties.

  If you use a Vista 32-bit edition, you can download it from

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=891ab806-2431-4D00-afa3-99ff6f22448d

  If the 64-bit operating system, download the pack of

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=8ad69826-03d4-488C-8f26-074800c55bc3

  Also, follow the link below for more information on the installation of SP2.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://windowshelp.Microsoft.com/Windows/en-us/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Now, start the computer on which you plan to install the service pack in safe mode.

  Note: Installing Service Pack 2 in safe mode, will erase all restore points.

  For more information on starting the computer in Mode safe, click on the link below:

  Start your computer in safe mode

   http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  Once the computer in safe mode, double-click on the file from the service pack and install it. Once the service pack installation is complete, you will be asked to reboot. Do. Your computer will now reboot in normal mode. The reboot takes longer time usually, there are a few extra steps for the installation of the service pack to be now carried out.

  I hope it should work now.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Security for Microsoft Office 2007 (KB2509488) update fails to install with error code 0 x 80070663

  On a computer dell laptop with Windows 7 Pro 32-bit.

  Hi Joe Evans SR,

  Follow the steps below:

  Method 1:

  To resolve the problem, run the Windows Update troubleshooting tool . He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Method 2:

  Offline installation

  Download and save the installation file on your desktop from the following link and proceed with the installation:

  Update of security for Microsoft Office System 2007 (KB2509488)

• Windows update fails to install with error 57F

  Since June 11 3 updates of MS - Office Outlook KB 970011, MS Word KB 969603 & MS Excel KB969681 failed to install. The error code is 57th
  This happens every time the pc is switched on/off.
  I tried to install manually via start / all programs/windows update but it also fails
  running Norton anti-virus software

  Hello Mcleod233,

  Thanks for reading, I appreciate it.

  It's great to hear.

  Hooray! Uday $012 please let me know if the solution worked or not I can improve, I thank you and appreciate your feedback, because it's the only one I can see I can improve.

• Windows Update failed. Get the error code 646.

  I am trying to install windows updates.  Service pack updates and Office (15 updates total office).  Updates download and go through the installation process.  But I got an error code (646) until the installation is complete.  I even tried to install updates at the time and still the same results.  I have uninstalled and reinstalled ofice.  Still a no go.  Help someone who has an answer.  It's really frustrating.

  OK... I had the same problem with the download of the 2007 Microsoft security updates. When I tried to install updates, I receive error 646. I finally solved my problem by going to the Download Center on Microsoft and I install manually.

  Here are the steps that I took... which I think should work:

  (1) go to the Microsoft Download Center: http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted here http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

• Cannot install Windows Update KB947821 KB2770660 KB2761465 with error code 80073712 / 8007371c

  Original title: cannot install KB947821 KB2770660 KB2761465 version November 2012

  Hello

  Because it was offered as part of a 10 part windows update a few weeks ago I have not been able to get

  KB947821

  KB2770660

  KB2761465

  Versions of November 2012 to load on my machine

  tried all software "fix it" off site, separate download of the site Web and cleaning facility.

  Tried all the option that I can find for similar problems on the forum too.

  nothing seems not to work

  Vista SP2

  Any help would be welcome.

  TIA

  Mark

  Hi Mark,

  Thank you for your response.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the methods below according to your error code and check the issue:

  Method 1:

   

  Follow the steps in the link below.

  Windows Update error 80073712:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80073712

   

  Method 2:

   

  Follow the steps in the link below.

   

  You receive the error code "0 x 80073712" or the "Windows features" dialog box is empty when you try to install the updates or components in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/931712

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

   

  Method 3:

   

  Follow the steps described in the links below.

   

  How to get the latest version of the Windows Update Agent:

  http://support.Microsoft.com/kb/949104

   

  Information for network administrators about how to obtain the latest Windows Update Agent:

  http://support.Microsoft.com/kb/946928

   

  Method 4:

   

  Follow the steps in the link below.

   

  How to reset the Windows Update components? :

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  Method 5:

  Follow the steps in the link below.

   

  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update:

  http://support.Microsoft.com/kb/957310

   

  On-site upgrade warning:

   

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

   

  Let us know the State of the question, if you need help I'll be more than happy to help you.

   

• Windows update fails to install with error 641.

  I get an error code 641 when trying to install the Windows updates on Windows Vista Home Premium 32 - bit on a s 531 Dell Inspiron.  The Windows updates I try to install are -

  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2686827)

  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656368)

  I don't have any idea what to do.  Any help appreciated.  (I already ran the general 'Microsoft Fix - it', but it did not help... Thank you very much

  Original title: Error Code 641

  ... I submitted the question half hoping that this problem was not System Mechanic.  However, I get it now.  I have to uninstall System Mechanic from this computer as well...

  Tip: Get this error resolved 641 and KB2686827 & KB2656368 installed first.

• KB2249857 Windows Update does not install with error code 800706BE

  Hello

  On October 28, Windows Update has identified 3 updates to be installed (KB2388210, Ko 2284742 & 2249857 KB) which caused my PC hang on reboot (stuck to the ' install updates...) 1 screen 3).

  Since then, I managed to install 2 of the 3 (KN2388210 & KB2284742) successfully by individually selecting in Windows Update but the KB2249857 update will not install and now whenever the PC stops it hangs while trying to install this update and needs a "hard reset" (that is, hold the power button) to recover up to.

  I've seen a few posts on problems with this update, but no definitive answer or resolutions.  Any ideas?

  Thank you!

  MARWOOD,

  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  What version of windows (32-bit or 64-bit) and service pack level.

  What application or antivirus security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  0x800706be RPC_S_CALL_FAILED http://support.microsoft.com/kb/950718/>

  Run the update http://support.microsoft.com/kb/947821system tool >

• 2829361 update fails to install with error 0x80070005 - Win XP SP3

  KB2829361 Windows update fails to install with error 0x80070005 - Win XP SP3

  Thanks for the reply, but I reinstalled Outlook 2003 and that solved the problem.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Windows Update fails for XP and Office 2003 security updates others are OK. Error message is 0x800F0102.

  Windows Update fails for XP and Office 2003 security updates others are OK. Error message is 0x800F0102.

  Ref: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-code-0x800f0102/eefc1d5a-2f89-4676-82fb-1d76debbd13f

  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825