System restarts when I plug my webcam

Similar Questions

• Satellite L350 - 16L system restarts when you run with power cord plugged

  Satellite L350 - 16L
  32 bit windows 7 ultimate sp1

  Power cable is connected, start the start, and just at the point where desktop should appear, the system restarts.
  When the system is running on battery, everything works fine.
  When the system boots to battery, works very well, and if I plug in the power cable, the system hangs
  When the power cable is plugged in, battery charge normally.

  I tried the different power cable, same thing.

  Do you remember when this issue began to appear?
  It would be interesting to know if something special that has happened in the past
  You use the original Toshiba AC adapter that came with this laptop?

  I think that this problem occurs due to the problem of the motherboard and I imagine that there could be some electronic problem power if the AC isn't affected adapter.

  I think it would be the worst case, because it means that your motherboard must be replaced to solve this problem... motherbaord replacement is very expensive and, probably, it is not worth to fix...

  By the way: is it possible to reinstall the system, while the laptop is conencted to the power adapter? What happens if enter you BIOS mode?

• When I plug my webcam and open Skype and try to start the video my computer blue screens, BCCode: d1

  I have this problem when I plug in my webcam and Skype open and try to start the video my blue screens, the info is shown after restart. My system is Vista Edition home premium 64. I find it more frustrating to have bought a new webcam as I suspected wrong a man!

  Does anyone have the answer?

  Bob

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: d1

  BCP1: 000000000000000A

  BCP2: 0000000000000002

  BCP3: 0000000000000001

  BCP4: FFFFFA6006555AA2

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini051112-02.dmp

  C:\Users\bob\AppData\Local\Temp\WER-63586-0.SysData.XML

  C:\Users\bob\AppData\Local\Temp\WER1D6E.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Thanks, but I have resolved the problem with the help of the forum, it was caused by the presence of old webcam drivers corrupted in the registry

  under

  HKEY_LOCAL_MACHINE, expand SYSTEM , expand CurrentControlSet , Control , class

  Then, in category, click on {{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}}

  Once I had deleted the value contained in the upper filters all then worked.

  Thanks again

  Bob

• Satellite A300 - restarts when I plug it into a power outlet

  Hi guys this seems to be the place to ask this question,
  My laptop is Satellite A300

  When I connect the adapter it restarts all of a sudden, if I stay on the battery, it is fine if I am running Windows and plug power will be locked up and restart. It starts so that plugged either, unless it is in safe mode. With the power of the battery (with power adapter) machine works without any problem.

  The problem (reboot) occurs when I connect to the AC adapter. I have change the power supply and tested. Remove the battery and tested. In addition, reformat and reinstall Vista and BIOS update.

  But the problem is still there, please can someone help me?

  Thank you!

  Hi icebunny,.

  Do you use an original Toshiba AC/DC adapter or a 3rd party one? This would explain why the computer restarts. Probably he doesn't use the correct specifications for voltage or intensity thus restarting the laptop.
  Did you check the characteristics of the AC/DC adapter? The lower side of your laptop, you can check which adapter AC/DC (e.g. 19V 4, 3 a) is necessary.

  Can you charge the battery when the laptop is turned off?

  At the moment I think that it s mainboard malfunction and that would mean that he must replace :(

• system restart when connecting to the remote desktop

  Hi team,

  I have a system and we mainly by using Remote Desktop connection... We are facing a question like: -.
  Suppose that a person take system through MSTSC, and after some time, if someone else will try to take remote desktop that PC even on this weather system will restart and then only another person will be able to access...
  I did some troubleshooting steps: -.
  System analysis but no virus detected...

  You could someone help me on this...

  Kind regards
  Narendra

  do you want to say that restart the computer, or do you mean that the current user is disconnected when a new user enters the new user credentials.

  If you mean the user is disconnected, keep in mind that XP pro only allows a user to be active at a time.

  Take the example of computer B, computer A and computer C.

  computer A is that B and C are trying to connect to via MSTSC.

  first computer B connects to A loggs, then runs a program. 10 minutes later computer C attempts to connect to A, and loggs on. If the credentials of the user are different from those used by computer B, will be disconnected the session on A and C will start a new session. This means that all of the programs that were running will be closed during the disconnection process.

  the way round, it would be to use the same newspaper on computer B or C on computer A credentials, anything could happen would computer B may be disconnected, and computer C would take control of the session if all running programs should continue to run.

  the other option would be to have all programs running as a service on computer A, but it really depends what you have found computer has to do.

  I hope this helps.

• How can I access the system tray when it is disabled on the public computers?

  Hi all

  I'm trying to access the icons on the test system such as: 'Remove the device safely', but I also try to access the other icons that would show in the system tray icon on the taskbar, when I plug my USB key into a USB port. The problem is, the I use public computers are at the library, and they have the system tray and start menu disabled, so not even my flash drive icon will appear in the system tray when I plug. Is there a way to access the system tray via a software or something?
  I did a search on google for answers before posting here, but so far without success. Any help would be appreciated.

  Hello

  You will need to check with the individual computer as they have probably disabled
  All methods of access to these functions, and the status bar for security reasons. Since that
  is a major challenge for public networks, I bet they left without holes.

  I hope this helps.

• Compurter restarts when the iPhone is connected

  cables replased - did not help

  Original title: iphone 4 connected to win7 computer stop

  Hello

  1. you receive an error message or error code?

  2 have you tried to connect the iPhone to another USB port?

  3. have you made changes on the computer before this problem?

  I suggest you go through the steps mentioned in the article.

  iPhone, iPad or iPod touch: Windows displays a blue screen message or restarts when you plug in your device

  http://support.Apple.com/kb/TS1502

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• When I go on webcam central, he tells me to plug in a supported webcam

  When I go on webcam central, he tells me to plug in a supported webcam. The webcam is integrated, but I can't seem to turn it on.

  FrankWilber,

  PLEASE READ AND ANSWER THE QUESTIONS THAT I ASKED, BELOW.

  Recently install you / reinstall the operating system? If so, have you installed the drivers I have the right order? How to download and install drivers in the correct order

  Try to read...

  Troubleshoot the Dell Webcam and the Dell Webcam Central software

  Also try running the Webcam Diagnostics

  The webcam showed in the tree of the symptoms?

  Error messages?

  The computer is under warranty?

  Rick

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• When I try to use my webcam in my hp laptop it reads this "no webcam not detected, try plugging your webcam" I can't connect the webcam if it is installed. What should I do?

  It is the cyberlink youcam is not working. He said "no webcam detected, try plugging your webcam. If you use a camera to make sure that its on. "Also my microphone does not work.

  Hi Samson,.

  1. What is the model of the webcam number?
  2. did you make any changes to the computer before the show took place?

  Method 1
  I suggest you to run the hardware and devices troubleshooter.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  I suggest to update the drivers for the webcam and the microphone provided free of charge by manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information:
  See to believe
  http://Windows.Microsoft.com/en-us/Windows7/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LAN does not connect when I plug

  Machine model: Hp 4530 s

  Operating system: Win 7 64 bit

  Hay

  I'm trying to connect to internet through my LAN broadband, but when I plug the machine in, nothing happens.

  I have to connect to internet via LAN as my Wifi router is out of use.

  When I bought this laptop, I test once LAN and it worked.
  Now, nothing is happening, I tried to restart the machine, etc..

  Auto updates are on, I could get the updated driver, I don't know about that.

  Help please, thank you.

  This is your problem.  You are indeed right, that they are not supposed to look like that.  Each of these axes is a PIN on the ethernet cable.  If one of these pins is not, or not aligned properly, you will receive all the data ever.  This explains why Windows detects ethernet controller (which it does not normally when the hardware has failed), as well as why you do not get the activity lights.

  If you had only your laptop for two years and a half months you need to contact HP directly and have the laptop repaired while it is still under warranty.  I have a link that will be useful to get this process started for you.

  The link takes you to a form to fill out.  Once you fill it and she is treated, it will give you the computer warranty information, a file number and the phone number to call.

  HP Technical Support call case forms.

• iPad 2 Mini - Lcd shows the Apple logo for 2 seconds and disappears but reloading works when I plug in the charger.

  The title should cover everything about what I'm going to tell you.

  The screen is black, while the iPad is running when I plug it into my mac, I see all my data and I can hear the sound of my messages/screenshot or screen when charging.

  The only time I see the Apple logo for 2 sec is when I restart the iPad now Power + Home at the same time.

  Would appreciate if you guys could help.

  NVM, I found the cause of this. This is a backlight problem. Apparently the filter or the fuse has been damaged and needs to be replaced... another $ 40 on the iPad repair...

• M1212nf MFP: Why can't I get or receive fax when I plug the printer in telephone2 taking on my Comcast modum?

  I just got a medical alert system that plugs into the Comcast modum Telephone1 decision-making, when I plugged in the printer/fax/copier on the card of Tel2 fax won't hear a tone.  Anyu suggestions?

  Tel 2 is a second line, you will pay for with Comcast.   You need a splitter to connect to your phone 1 line to share.

• Satellite A300 - restarts if I plug charger

  Hi all

  I'm on Toshiba Satellite A300 (psag0n/00w00u). Today, I installed Vista home edition. Now, I am facing strange problem that is my lappy restarts automatically as I plug in charger. This problem started suddenly previously installed OS (Vista ultimate), but at this time there I didn't notice if this only happens when I plug in charger. It seems to be a hardware error.

  Can you please help?

  Thanks in advance,
  Fox

  Hi remy,.

  In my opinion this has nothing to do with the Vista installation restart your laptop if you plug in a charger.

  To me, it looks like a hardware problem and your laptop should be checked by a technician of the laptop. Maybe the motherboard needs to be replaced or something else.
  By the way: you use the original from Toshiba AC adapter or another?

  If you use the original Toshiba adapter, contact the service provider authorized in your country. If not try again with an original Toshiba adapter.